Über lückenlose Ausfüllung desn-dimensionalen Raumes durch kongruente Würfel

Ohne Zusammenfassung     

Recyclable,non-leaching antimicrobial magnetic nanoparticles

Recyclable antimicrobial magnetic nanoparticles, Fe₃O₄@P(St-co-AcQAC), were prepared through surfactantfree seeded emulsion polymerization involving a polymerizable, hydrophobic quaternary ammonium compound (QAC). These antimicrobial magnetic nanoparticles demonstrated excellent antimicrobial activities against both Grampositive and Gram-negative bacteria, and can be reused for multiple times.     

Freezing temperatures and densities of solutions of some hydrocarbons and sodium oleate inN-methylacetamide. Evidence for a solvophobic interaction

The freezing temperatures and densities (at 31°C) of solutions of octane, nonane, decane, 3,3-diethylpentane, and sodium oleate inN-methylacetamide (NMA) have been measured. The molality of the freezing solution was calculated from the density. The solubilities of octane, nonane, and decane inN-methylacetamide are also reported. Apparent molal volumes calculated from the densities are close to the values in the pure hydrocarbons and are not strong functions of the concentration. This indicates the absence of any unusual packing effect. The calculated free energies of transfer of the hydrocarbons from pure hydrocarbon to NMA solution are much less negative than the corresponding values for water, showing that the bulk solvophobic interaction inN-methylacetamide is smaller than in water. This is consistent with the freezing temperatures of sodium oleate which show that micelles do not form below 0.1 mole-kg^–1. The osmotic coefficients of the hydrocarbons calculated from the freezing temperatures showed negative deviations from ideality that were larger for the hydrocarbons with the higher molecular weights. Two estimates of the pairwise solvophobic interaction inN-methylacetamide indicate that it is also smaller than in water. The solvophobic effect in this solvent does not include the large entropy and enthalpy effects found in aqueous solutions.     

Microheterogeneity in aqueous-organic solutions: Heat capacities,volumes and expansibilities of some alcohols,aminoalcohol and tertiary amines in water

The heat capacities per unit volume and the densities of aqueous solutions of 2-propanol, neopentanol, tert-amylalcohol, 2-amino-2-methylpropanol, triethylamine and diethylmethylamine were measured, in many cases as a function of temperature, over the whole mole fraction or solubility range. Apparent and partial molal heat capacities, volumes and expansibilities were derived. The concentration dependence of these functions suggest the existence of transitions in some of these systems, in the water-rich region, qualitatively similar to micellization. The large relaxation contribution observed with some of the thermodynamic functions of hydrophobic alcohols and amines suggests a reinforcement of hydrophobic hydration due to strong hydrogen-bonding interactions of the polar groups with water.     

Hydrogencarbonat-Bestimmung im Wasser in Anwesenheit von Anionen anderer schwacher S?uren

Zusammenfassung Die maßanalytische HCO₃ ^–-Bestimmung im Wasser kann bei gleichzeitig vorhandenen Anionen anderer schwacher Säuren, insbesondere in Wässern mit erheblicher Belastung an polaren organischen Stoffen, zu stark erhöhten HCO₃ ^–-Werten und damit zu einer Fehlbeurteilung des untersuchten Wassers führen. Es wurde daher ein Verfahren ausgearbeitet, das den wahren HCO₃ ^–-Gehalt mit einem Fehler von höchstens –5% ermittelt. Hierbei wird das Gesamtkohlendioxid gravimetrisch, das freie Kohlendioxid volumetrisch bestimmt und HCO₃ ^– aus der Differenz berechnet.

---

Determination of bicarbonate in water in presence of anions of other weak acids

The contemporary presence of anions of other weak acids is able to simulate a much elevated content by the volumetric determination of bicarbonate, especially in waters with a considerable loading of organic matters. A process was elaborated, which finds out the real content of bicarbonate with an error of —5% at most, consisting in the gravimetric determination of total carbon dioxide and the volumetric determination of free carbon dioxide. HCO₃ ^– is calculated from the difference.

     

Thermodynamic properties of aqueous organic mixtures near the critical demixing: Cases of 2,6-dimethylpyridine and of 2-isobutoxyethanol

Phase diagrams, volumes and heat capacities of aqueous mixtures of 2,6-dimethylpyridine (2,6-L) and 2-isobutoxyethanol (iBE) and activities of 2,6-L in aqueous mixtures were measured in the monophasic region near the lower critical solution temperature (LCST). With 2,6-L some measurement were also made just above the LCST. From the temperature dependence of these data, partial molar relative enthalpies (2,6-L), expansibilities and the temperature derivative of heat capacities were calculated and show that iBE undergoes a microphase transition at low concentration which is not related to the phase separation. On the other hand, the properties of 2,6-L in the water-rich region at temperatures well below the LCST indicates that this solute has only a slight tendency to associate. The heat capacities of 2,6-L show an important increase near the LCST. Such changes are not observed for iBE and other alkoxyethanols and amines since these systems already exist in the form of microphases; the partial molar properties of iBE near the LCST are nearly equal to the molar values of the pure liquid, and the changes in thermodynamic properties corresponding to the macroscopic phase transition, are therefore too small to be measured by the present techniques.     

Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Salting-in of alcohols in aqueous solutions by tetraalkylammonium bromides at the freezing temperature

The freezing-point depression of the ternary systems tetraalkylammonium bromides-t-butanol-water for the first five homologs of R₄NBr was measured. In the case of Bu₄NBr, the effect of size of the alcohol (methahol ton-butanol) was also investigated. From the corresponding freezing-point data for the binary systems the apparent salting constants were calculated. The true salting constantsk _s were obtained by extrapolation to infinite dilution. These are all very close to zero at the freezing temperature. From the corresponding thermochemical data the temperature dependence ofk _s was calculated, and above 5°C all the R₄NBr salts int-butanol; the salting-in increases with temperature and with the size of the hydrophobic cations. The scaled-particle theory is at present the only one which can account semiquantitatively for the temperature dependence of the salting-in effect. On leave of absence from Chemistry Department, The University, Sheffield S3 7HF, England To whom correspondence should be addressed.     

Thermodynamic properties of alkali halides. IV. Apparent molal volumes,expansibilities, compressibilities,and heat capacities in urea-water mixtures

The apparent molal volume φ_v, expansibility φ_E, compressibility φ_K, and heat capacity φ_c of NaCl were measured in urea-water mixtures, as a function of salt (<1.5m) and urea (<13m) concentrations at 25°C. At a fixed urea concentration, the transfer functions from H₂O to 3m urea are linear functions of the NaCl aquamolality. At a fixed salt aquamolality, (0.1m), the sign of the transfer functions is in the direction of a decrease in the structure-breaking effect, and the absolute values of the transfer functions tend to level off at high urea concentrations (13m). The functions φ_v, φ_E, φ_K, φ_c, and (?φ_v/?T)_p were measured for the sodium halides and alkali, bromides (chlorides in the case of φ_K) at a fixed salt aquamolality of 0.1m and fixed urea molality of 3m. The corresponding transfer functions from H₂O to 3m urea are opposite those from H₂O to D₂O and similarly are relatively independent of ionic size. This suggests that urea, shows no specific interaction affinity for ions and that the overall number of water molecules influenced by the ions is relatively constant for all alkali halides. The lithium halides are an exception in that Li⁺ seems to have hardly any structure-breaking effect.