AM/AA/DMDAAC/OAM疏水缔合的两性共聚物的合成及性能研究

以十八醇为原料,制备长链疏水单体N-十八烷基丙烯酰胺(OAM)。以丙烯酰胺(AM)、丙烯酸(AA)、二甲基二烯丙基氯化铵(DMDAAC)、N-十八烷基丙烯酰胺(OAM)为单体,通过胶束聚合法合成了水溶性疏水缔合两性四元共聚物。利用FT-IR、1HNMR、DTA-TG对聚合物的结构和热稳定性进行分析,考察了疏水基团摩尔分数、聚合物浓度对聚合物溶液表观粘度、储能模量、耗能模量等流变性能的影响,并对四元共聚物溶液的性能进行评价。结果表明,疏水两性共聚物具有很好的耐温、抗盐、耐剪切等优异性能。     

磁铁快速安装准直方法在HLSⅡ升级改造中的应用

合肥光源进行重大升级改造(HLSⅡ)的磁铁安装准直工程要在有限的时间内对近120块各型磁铁进行安装准直调节。为了保证磁铁安装准直任务顺利完成,结合合肥光源自身特点,合理使用了多种测量仪器和软件,在元件坐标系下直接进行磁铁安装准直,极大地提高了工作效率和安装精度。在经过先后三次准直安装调节后,所有磁铁均安装准直就位,定位精度达到预定要求。     

超短脉冲激光再生与多程放大器的理论分析与实验建立Ⅰ.理论部分

从半经典理论的麦克斯韦－布洛赫方程出发,对种子激光脉冲在再生和多程放大器中的放大过程进行了分析,结合实际的物理条件得出了放大器的峰值输出的解析表达式。     

复杂多孔介质腔体内自然对流换热的数值研究

采用曲线坐标系下压力与速度耦合的SIMPLEC算法,数值研究复杂多孔介质腔体内的自然对流换热问题.腔体的曲面温度分别保持恒定,上下表面绝热.在曲线坐标系中用有限容积法离散方程,并采用Brinkman扩展达西模型及局部非热平衡模型求解,综合研究Rayleigh数,Darcy数、孔隙率等参数对腔体内自然对流换热的影响.计算结果表明:Rayleigh数和Darcy数的影响最大而孔隙率的影响很小,同时存在使得腔体内换热达到最强的最佳纵横比.     

Oxygen-supplied mesoporous carbon nanoparticles for enhanced photothermal/photodynamic synergetic therapy against antibiotic-resistant bacterial infections

Pandemic and epidemic spread of antibiotic-resistant bacterial infections would result in a huge number of fatalities globally. To combat antibiotic-resistant pathogens, new antimicrobial strategies should be explored and developed to confront bacteria without acquiring or increasing drug-resistance. Here, oxygen saturated perfluorohexane (PFH)-loaded mesoporous carbon nanoparticles (CIL@ICG/PFH@O₂) with photothermal therapy (PTT) and enhanced photodynamic therapy (PDT) utility are developed for antibacterial applications. Ionic liquid groups are grafted onto the surface of mesoporous carbon nanoparticles, followed by anion-exchange with the anionic photosensitizer indocyanine green (ICG) and loading oxygen saturated PFH to prepare CIL@ICG/PFH@O₂. These CIL@ICG/PFH@O₂ nanoparticles exhibit effective PTT and enhanced PDT properties simultaneously upon 808 nm light irradiation. In vitro assays demonstrate that CIL@ICG/PFH@O₂ shows a synergistic antibacterial action against antibiotic-resistant pathogens (methicillin-resistant Staphylococcus aureus and kanamycin-resistant Escherichia coli). Moreover, CIL@ICG/PFH@O₂ could effectively kill drug-resistant bacteria in vivo to relieve inflammation and eliminate methicillin-resistant Staphylococcus aureus-wound infection under NIR irradiation, and the released oxygen can increase collagen deposition, epithelial tissue formation and blood vessel formation to promote wound healing while enhancing the PDT effect. This study proposes a platform with enhanced PTT/PDT effects for effective, controlled, and precise treatment of topical drug-resistant bacterial infections.

We report oxygen saturated perfluorohexane (PFH)-loaded mesoporous carbon nanoparticles (CIL@ICG/PFH@O₂) with photothermal therapy (PTT) and enhanced photodynamic therapy (PDT) utility for antibacterial applications.     

石墨炔原子催化剂的崭新道路:基于自验证机器学习方法的筛选策略

近年来, 原子催化剂(ACs)引起了广泛的研究关注. 目前该领域的长足发展受限于贵金属的使用和单原子催化剂(SACs)的性能有限. 本文总结了利用密度泛函理论(DFT)和机器学习(ML)方法筛选高效的基于石墨炔(GDY)的原子催化剂的工作. 研究表明, Pd, Co, Pt和Hg可以形成稳定的零价过渡金属-石墨炔组合(TM-GDY), 而镧系-过渡金属的双原子催化剂(Ln-TM DAC)组合通过f-d轨道耦合作用可以获得有效的催化性能提升. 进一步分析表明, 主族元素与过渡金属和镧系金属的结合可以通过p轨道耦合保持高电活性, 从而构成高度稳定的GDY-DAC系统, 机器学习算法也揭示了s,p轨道的作用. 此外, 理论算法技术在筛选催化水分解析氢反应(HER)的高效组合上也表现出了优越性, 创新性地预测了石墨炔-原子催化剂在实际催化反应中的潜能. 本综合评述可为未来设计新型原子催化剂提供新的思路与策略.     

含Fe2O3摩擦层的促进形成对H13和45钢磨损性能的影响

Fe_2O_3是钢材高温或高速干滑动表面摩擦氧化物层的重要构成.本文作者通过在H13钢、45钢/GCr15钢的滑动界面添加Fe_2O_3纳米颗粒,试图促进保护性摩擦氧化物层的快速形成,避免了高温恶化材料的机械性能.研究了Fe_2O_3对H13钢和45钢磨损性能的影响,分析了摩擦氧化物层的形成机理,并探讨了基体硬度对摩擦氧化物层的作用.研究结果表明:无添加时,低硬度45钢的耐磨性明显差于高硬度的H13钢;GCr15钢在与45钢对摩时,磨损率也明显大于与H13钢对摩时.添加Fe_2O_3后,纳米颗粒在H13和GCr15钢表面迅速相互黏着并形成保护性的摩擦氧化物层,导致磨损率急剧下降,且随载荷增加仅轻微波动.而较软45钢基体对摩擦氧化物层的支撑能力较弱,摩擦氧化物层破碎,高载下磨损率明显大于低载下.     

基于有机溶剂原位制备的致密疏水铜金属层在保护锌负极中的应用

通过在 N-甲基吡咯烷酮(NMP)有机溶剂中锌电极与 CuI之间的置换反应,在锌电极上原位构建了一层致密且疏水的铜金属保护层(Cu@Zn)。铜金属保护层能有效地隔离锌电极与电解液的接触,减少锌电极-电解液界面的析氢和腐蚀等副反应。同时,铜金属保护层还具有较好的亲锌性,更小的界面电阻,更低的成核能垒,有利于锌离子均匀沉积,从而有效抑制了锌枝晶的生成。Cu@Zn对称电池实现了超过 1 700 h(1 mA·cm^-2)和 1 330 h(3 mA·cm^-2)的循环寿命。采用商用 MnO₂与之匹配得到的Cu@Zn||MnO₂全电池不仅在1 A·g^-1下具有168.5 mAh·g^-1的可逆比容量,还可稳定循环2 000次以上。     

Metastable Tetragonal Cu2Se Hyperbranched Structures: Large‐Scale Preparation and Tunable Electrical and Optical Response Regulated by Phase Conversion

Despite the promising applications of copper selenide nanoparticles, an in‐depth elucidation of the inherent properties of tetragonal Cu₂Se (β‐Cu₂Se) has not been performed because of the lack of a facile synthesis on the nanoscale and an energy‐intensive strategy is usually employed. In this work, a facile wet‐chemical strategy, employing HCOOH as reducing agent, has been developed to access single‐crystalline metastable β‐Cu₂Se hyperbranched architectures for the first time. The process avoids hazardous chemistry and high temperatures, and thus opens up a facile approach to the large‐scale low‐cost preparation of metastable β‐Cu₂Se hyperbranched architectures. A possible growth mechanism to explain the formation of the β‐Cu₂Se dendritic morphology has been proposed based on time‐dependent shape evolution. Further investigations revealed that the metastable β‐Cu₂Se can convert into the thermodynamically more stable cubic α‐Cu_2?xSe maintaining the dendritic morphology. An increase in electrical conductivity and a tunable optical response were observed under ambient conditions. This behavior can be explained by the oxidation of the surface of the β‐Cu₂Se hyperbranched structures, ultimately leading to solid‐state phase conversion from β‐Cu₂Se into superionic conductor α‐Cu_1.8Se, which has potential applications in energy‐related devices and sensors.     

A numerical study on gasification of a single-pore char particle in supercritical water

Journal of Thermal Analysis and Calorimetry - Gasification models of a char particle based on the true porous structure are essential for the accurate simulation of gasifiers, and pore-scale study...