电感耦合等离子体原子发射光谱分析中导数光谱法研究——Ⅱ.数据平滑和扫描步长的影响

数据平滑和扫描步长是两个重要求导条件。本工作用五点三次多项式平滑技术对扫描数据进行平滑处理以消除随机噪音,但平滑次数增大会导致信号失真从而使导数光谱的分辨能力降低。扫描步长减小能提高导数光谱的分辨能力,但同时导致导数光谱灵敏度减小。导数光谱中干扰物等效浓度IEC的大小是上述因素的综合反映。本文以IEC为考察指标,讨论了平滑次数和扫描步长的优化。     

生物样品的微波-酸消解电感耦合等离子体原子发射光谱多元素同时分析

对不同类型的生物样品的微波酸消解法与常规酸消解法作了比较研究,方法用于茶叶和贻贝标准参考物质的定值分析,取得满意结果.     

Controllable Zeolite AST Crystallization: Between Classical and Reversed Crystal Growth

Crystal growth mechanisms govern a wide range of properties of crystalline materials. Reversed crystal growth is one of the nonclassical mechanisms observed in many materials. However, the reversed crystallization starting from amorphous aggregates and the key factors driving this growth remain elusive. Here, we describe a characteristic model of reversed crystal growth representing the inner structure and crystallinity development of aggregates studied by microscopy and nano X-ray computed tomography. By adjusting the synthesis conditions, the fundamental function of the structure-directing agent, which determines the crystallization pathway, was revealed. As a result, the crystal growth mode can be “switched” from the classical route at a low ratio of SDA/framework elements to reversed growth at a high ratio. Our findings provide further insights into crystal growth control, which is crucial for improving synthesis protocols and designing various forms of crystalline materials.     

Simultaneous Determination of Procaspase Activating Compound 1 and Permeability Markers in Intestinal Perfusion Samples and Application to a Rat Intestinal Absorption Study

A sensitive and simple HPLC method for simultaneous determination of PAC-1 (first procaspase-activating compound), phenol red, and permeability markers (carbamazepine and furosemide) in perfusion samples was developed and validated to assess intestinal absorption of PAC-1 using single-pass intestinal perfusion technique (SPIP) in rats. The chromatographic separation was carried out on a Kromasil C₁₈ column (150 mm × 4.6 mm, 5 μm) with acetonitrile–methanol–30 mmol L⁻¹ phosphate buffer (pH 3.0, 25:10:65, v/v/v) as mobile phase at a flow rate of 1.0 mL min⁻¹, and the wavelength of the UV detector was set at 281 nm. The calibration curves were linear in the ranges of 2.40–48.0 μg mL⁻¹ for PAC-1; 3.60–72.0 μg mL⁻¹ for carbamazepine; 3.20–64.0 μg mL⁻¹ for furosemide, and 4.80–96.0 μg mL⁻¹ for phenol red (r > 0.999). Both the intra- and inter-day precisions (RSD%) of all analytes were less than 6.8 % at three concentration levels, while accuracy ranged from 95.4 to 104.5 %. Data obtained in all method validation studies indicated that the method was suitable for the intended purpose. The effective permeability values (P _eff) considering water flux with the help of non-permeable marker phenol red was calculated to be 0.42 × 10⁻⁴, 0.62 × 10⁻⁴, 0.32 × 10⁻⁴ cm s⁻¹ for PAC-1; 0.72 × 10⁻⁴, 0.77 × 10⁻⁴, 0.52 × 10⁻⁴ cm s⁻¹ for carbamazepine; 0.20 × 10⁻⁴, 0.16 × 10⁻⁴, 0.12 × 10⁻⁴ cm s⁻¹ for furosemide in duodenum, jejunum and ileum, respectively. The P _eff value can be increased by co-perfusion with verapamil, indicating that absorption of PAC-1 is efficiently transported by P-glycoprotein (P-gp) in the gut wall.

     

预混旋流雾化-氢化物发生电感耦合等离子体原子发射光谱法同时测定氢化物及非氢化物形成元素

在原旋流雾室气动雾化-氢化物发生装置上增加样品-硼氢钠溶液混合通道,使氢化物形成元素的检出限较原装置明显改善,非氢化物形成元素的检出限也有一定改善;汞可还原为原子蒸汽而提高进样效率,检出限较通常的气动雾化法改善20倍。方法应用于地质样品中氢化物及非氢化物形成元素的同时测定。     

电感耦合等离子体原子发射光谱法同时测定植物样品中多种元素

本文为环境样品分析建立了准确、灵敏、快速的分析方法,探讨了酸类及酸度对谱线强度的影响,同时对基体元素的谱线干扰进行了校正和背景扣除,测定了环境背景值样品树干和树叶中15种元素,经标样测定结果满意。     

非金属光敏剂石墨烯量子点与磷化镍耦合用于可见光光催化制氢（英文）

利用光催化反应制取氢气是满足未来能源可持续利用的一个很有效的方法.然而,如何去开发和利用高效且稳定的非金属光催化剂用于产氢反应是目前所面临的一个巨大的挑战.最近,非金属纳米碳基材料由于其诸多优点而吸引了人们广泛的关注,比如价格低廉、环境友好和良好的稳定性等.另外,石墨烯量子点由于具有很好的水溶性、低毒性,良好的生物兼容性和很好的光学稳定性等优点而被当作是一种能够替代传统量子点的很有前途的材料.除此之外,石墨烯量子点的带隙还可以通过控制其颗粒大小和其表面所带的官能团来进行灵活调控.另一方面,金属磷化物(磷化镍、磷化钴等)已经被证实了是很好的水分解制氢的非贵金属助催化剂,它们可以加快光生电子和空穴的分离,从而提高光催化活性.本文利用非金属光敏剂石墨烯量子点与非贵金属助催化磷化镍进行耦合制备复合光催化剂,实现了在可见光照射下进行光催化制氢.在最优条件下,复合光催化剂的产氢速率为空白石墨烯量子点的94倍,甚至与在空白量子点上负载1.0wt%Pt的产氢速率相当.产氢速率的大幅度提升可能是由于在石墨烯的量子点和磷化镍之间形成了半导体–金属接触界面,从而更有效地促进了光生载流子的传输过程.石墨烯量子点本身有着很好的水溶性,从而利用机械搅拌的方法与磷化镍进行耦合,并在可见光下进行产氢反应.本文采用红外光谱(FTIR)、透射电镜(TEM)、紫外可见光谱(UV-Vis)和荧光光谱(PL)等表征手段研究了空白量子点表面所带的官能团、尺寸大小和光学性能.采用TEM和PL等表征手段来研究复合光催化剂的形貌和产氢性能提高的原因.对于空白量子点,FTIR结果表明,其表面带有–OH等官能团;TEM结果表明,它的尺寸大小大概在3.6±0.5 nm;UV-Vis结果表明,其在可见光区域有着很强的光吸收;PL结果表明,其在波长约为540 nm处有着很强的吸收峰,所对应的带隙约为2.3 eV.对于复合光催化剂,TEM测试结果表明石墨烯量子点在磷化镍上随机分布;从PL结果可见,复合光催化剂的荧光强度明显降低,说明了光生电子从量子点到磷化镍的有效转移,这也是光催化活性提高的重要原因     

电感耦合等离子体原子发射光谱分析中导数光谱法研究——Ⅰ.光谱干扰校正

本文报道了利用导数光谱法校正ICP-AES中光谱干扰的潜力,讨论了导数光谱法的特点以及它比常用的干扰系数法和离峰分析法具有更大的适用性。     

自模型曲线分辨法校正电感耦合等离子体原子发射光谱中严重谱线重叠干扰

对严重重叠的光谱干扰校正,采用较小间隔的光谱扫描测量,并用间隔扫描点的数据计算,可减小计算结果的误差,提高结果的准确性。本方法用于校正Nd359.259nm对Sm359.260nm和V328.939nm对Yb328.937nm谱线重叠干扰,得到了满意的结果。