Lattice gas simulations of two-dimensional liquid foams

Liquid foam is a dense random packing of gas bubbles in a small amount of immiscible liquid containing surfactants. The liquid within the Plateau borders, although small in volume, causes considerable difficulties to investigations of the physical properties of foams, and the situation becomes even more complicated if the flow of the liquid through the foam is considered too. Here we propose a fresh approach to tackling these issues by introducing a discrete two-dimensional hybrid lattice gas model of liquid foams. While lattice gas models have been used to model two-phase liquids in the past, their application to the study of liquid foams is novel and proves promising. We represent bubble surfaces by a finite number of nodes, and model the surrounding liquid as a lattice gas (with a finite number of liquid particles). The gas in the bubbles is treated as an ideal gas at constant temperature. The model is tested by choosing an arbitrarily shaped bubble that evolves into a circular shape in agreement with Laplaces law. The model is then employed to simulate periodic ordered and disordered dry and wet foams. Since our model is specifically designed to handle wet foams up to a critical liquid fraction of 0.16 (void fraction of random packing of disks), we are able to compute the variation in coordination number (average number of neighbours of a bubble) over the whole range of liquid fractions, and we find it to be a linear function of the shear modulus.This paper was presented at the first Annual European Rheology Conference (AERC) held in Guimarães, Portugal, 11–13 September 2003.     

Study on the flow resistance of the dispersion system of deformable preformed particle gel in porous media using LBM-DEM-IMB method

After being injected into the porous media, the dispersion system of preformed particle gel (PPG) tends to enter high permeability regions and block water channeling passages, which forces the subsequent water to turn to the low permeability regions and thus increases sweep efficiency and enhances oil recovery. However, it is still unclear about the influence factors and the mechanisms how PPG increases water flow resistance, which limits the application of PPG in more oilfields. Therefore, the paper combines the lattice Boltzmann method (LBM), the discrete element method (DEM) and the improved immersed moving boundary (IMB) method to simulate the migration of deformable PPG in porous media. On the basis, the paper quantitatively analyzes the variation law of displacement pressure across the porous media and discusses the influence factors such as the PPG diameter, elasticity modulus and the number concentration. Results indicate that, because of the friction and retention of PPG in pore-throat, the displacement pressure across the porous media during PPG flooding is much higher than that during water flooding. In other words, the existence of PPG increases the flow resistance of injected water. Besides, the displacement pressure is always fluctuant resulting from the continuous process of PPG migration, retention, deformation and remigration. Influence factor analysis shows that the incremental value and fluctuation degree of flow resistance increase with the PPG diameter, elasticity modulus and the number concentration. The study not only provides useful reference for future PPG flooding, but also benefits the development of deformable particle flow theory.     

液态泡沫渗流的机理研究进展

液态泡沫是具有高度自组织结构的非平衡系统. 泡沫中的微量液体在重力与毛细管力作用下, 在由薄膜、柏拉图通道以及交汇点形成的通道网络内的流动称为泡沫渗流(foamdrainage), 它直接影响泡沫结构的稳定性. 本文从泡沫物理学角度对液态泡沫的结构首先做了简单介绍, 并对泡沫材料与多孔介质之间的区别和联系做了简单介绍. 文章分析了由泡沫渗流、气泡粗化和液膜破裂而引起的泡沫结构演化规律, 着重介绍了目前泡沫渗流研究中对柏拉图通道边界条件的处理方法、相应的渗流模型及其在一维泡沫渗流中的应用, 并对泡沫渗流实验检测手段及微重力条件下的泡沫渗流实验和理论研究做了综述.     

Simulations of granular flow along an inclined plane using the Savage–Hutter model

In this work a velocity-dependent friction is introduced into a depth-averaged Savage–Hutter dynamical model for shallow granular flows. The process of granular material flowing along an inclined plane and then depositing on a horizontal plane is simulated. The surface profiles and evolution of various types of energy are investigated and compared when using the standard Coulomb-type friction versus velocity-dependent friction. Interestingly, there is a small difference between the two different types of friction.     

MOF衍生的分层多孔三维N-CoPx/Ni2P大电流密度下加速析氢

氢气(H2)具有能量密度高、环境友好等优点,是一种很有前景的清洁能源载体.目前,电催化水裂解大规模制氢被认为是一种理想可行的方法.析氢反应(HER)涉及多个步骤,首先形成吸附的氢(Volmer步骤),然后是脱附步骤(Heyrovsky步骤)或两个相邻的吸附氢形成H2(Tafel步骤).与酸性介质相比,碱性介质中的HER...     

具有复合幂函数和共存吸引子的新混沌系统的动力学分析与电路仿真

构造一个具有复合幂函数的三维连续自治混沌系统。系统的状态方程仅有5项,其中一项是指数小于1的复合幂函数。该系统具有结构简单、非双曲平衡点、吸引子共存的性质,展现出了复杂的动力学行为。首先,对系统的动力学行为进行分析,包括李雅普诺夫（Lyapunov）指数谱、分岔图以及庞加莱映射等,结果表明此系统具有混沌特性。然后进行混沌系统的电路设计,电路仿真结果验证了理论分析的正确性。     

地下隧道开挖中饱水围岩的力学特性研究

为探究不同开挖方式对应的卸荷速率对饱水围岩的影响,对饱水砂岩开展了常规三轴压缩试验和轴向位移不变的卸围压（速率为0.1~5 MPa/s）试验。结果表明：在卸围压试验中环向变形是破坏的主要原因;随着卸围压速率的增加,破坏点的围压和轴向主应力增加且位于常规三轴压缩包络线外,环向能、总能和耗散能的变化量呈V形变化,试样的破坏模式由共轭剪切破坏转化为张应变 + 共轭剪切混合破坏,试样的剪胀角随着塑性剪切应变的增加先降低后增加。     

基于颗粒物质流体动力学的三轴力学分析

构建了颗粒体系热力学特征函数, 确定了宏观尺度不可逆过程的迁移系数, 将颗粒物质流体动力学理论应用于密砂的三轴加载力学性质分析, 得到了应力-应变关系和体积应变-应变关系, 还得到了颗粒温度演化过程.      

Temporal correlation of force and position in granular materials

We investigate the quasi-static mechanical response of dense granular materials under biaxial compressions by using discrete element simulation. The internal force network and its evolution are observed for different strains. Our results show that correlation of force and position appropriately characterize the bulk response and volumetric strain.