On hyper-Zagreb index conditions for hamiltonicity of graphs

Czechoslovak Mathematical Journal - During the last decade, several research groups have published results on sufficient conditions for the hamiltonicity of graphs by using some topological...     

A novel thin-layer chromatography-based method for Brazilin quantification

JPC – Journal of Planar Chromatography – Modern TLC - Brazilin, a constituent of the Chinese medicine heartwood, exhibits pronounced anti-tumor effects. To date, brazilin quantification...     

Boosting Photocatalytic Oxygen Evolution: Purposely Constructing Direct Z-Scheme Photoanode by Modulating the Interface Electric Field

Ti-Fe₂O₃ photoanode has received widespread attention in photoelectrochemical(PEC) water spilling because of its optimized oxidative and reductive capability of composites catalyst. However, its low efficiency could limit its development. Herein, in order to improve the efficiency of PEC water spilling, the all-solid-state direct Z-scheme Ti-ZnFe₂O₄/Ti-Fe₂O₃(TZFO/Ti-Fe₂O₃) nanorod arrays composited with the ideal energy band structure are synthesized by modulating the Fermi level of TZFO for PEC water splitting. The photophysical methods in this work, including the Kelvin probe measurement and transient photovoltage spectroscopy(TPV) measurement, are applied to explore the migration behavior of electric charges at the enhanced interface electric field. Finally, the Z-scheme charge transfer mechanism of TZFO/Ti-Fe₂O₃ photoanode is proved successfully. Benefiting from the desirable charge transfer at interface electric field, the TZFO/Ti-Fe₂O₃ exhibits the outstanding photocatalytic oxygen evolution reaction(OER) performance, and the photocurrent of 60TZFO/Ti-Fe₂O₃ photoanode reaches 2.16 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE), which is three times higher than that of pure Ti-Fe₂O₃ photoanode. This work provides a facile approach of modulating interface electric field to optimize the Z-scheme charge-transfer process.     

[100]LiF单晶在60 GPa以内冲击加载下的高压屈服强度特性

获取光学窗口自身的高压强度特性是开展材料高压高应变率冲击响应行为精密测量和数据反演的重要基础。利用平板撞击和双屈服面法,通过冲击-卸载、冲击-再加载原位粒子速度剖面精细测量和数据反演,获得了约60 GPa范围内[100]LiF屈服强度特性随冲击压力的变化规律。结果表明:在实验压力范围内,[100]LiF的屈服强度随加载压力的提高而显著提高,压力硬化效应显著;同时,LiF在冲击加载下的屈服强度高于磁驱准等熵加载结果,应变率硬化效应强于热软化效应。采用Huang-Asay模型确定了可描述冲击加载[100]LiF强度特性的本构模型参数,为LiF在强度、相变、层断裂等加窗测量实验中的深入应用和数据准确解读提供了重要支撑。     

l-Lysine-Based Gelators for the Formation of Oleogels in Four Vegetable Oils

Supramolecular oleogel is a soft material with a three-dimensional structure, formed by the self-assembly of low-molecular-weight gelators in oils; it shows broad application prospects in the food industry, environmental protection, medicine, and other fields. Among all the gelators reported, amino-acid-based compounds have been widely used to form organogels and hydrogels because of their biocompatibility, biodegradation, and non-toxicity. In this study, four N^α, N^ε-diacyl-l-lysine gelators (i.e., N^α, N^ε-dioctanoyl-l-lysine; N^α, N^ε-didecanoyl-l-lysine; N^α, N^ε-dilauroyl-l-lysine; and N^α, N^ε-dimyristoyl-l-lysine) were synthesized and applied to prepare oleogels in four kinds of vegetable oils. Gelation ability is affected not only by the structure of the gelators but also by the composition of the oils. The minimum gel concentration (MGC) increased with the increase in the acyl carbon-chain length of the gelators. The strongest gelation ability was displayed in olive oil for the same gelator. Rheological properties showed that the mechanical strength and thermal stability of the oleogels varied with the carbon-chain length of the gelators and the type of vegetable oil. The microstructure of oleogels is closely related to the carbon-chain length of gelators, regardless of oil type. The highest oil-binding capacity (OBC) was obtained in soybean oil for all four gelators, and N^α, N^ε-dimyristoyl-l-lysine showed the best performance for entrapping oils.     

质子治疗装置动态电源控制系统研发

针对质子治疗装置中主环动态电源多平台能量的引出需求,研制了基于开源平台的高速实时动态电源控制系统,该控制系统以开源平台Beaglebone作为顶层硬件接口,以现场可编程逻辑门阵列(FPGA)为核心的控制器作为底层硬件接口,采用分布式的实验物理及工业控制系统(EPICS)进行远程控制。该系统可实时传输任意动态电源的输出参考电流波形数据,并结合定时系统与联锁系统,控制动态电源按预设电流波形进行输出,并实现多平台能量的引出。实验结果显示该控制系统能实现每秒最高十万条指令传输,百万次数据传输零误码率。同时,该系统结构灵活、扩展性强,可作为通用控制平台。     

Au Modified F-TiO2 for Efficient Photocatalytic Synthesis of Hydrogen Peroxide

In this work, Au-modified F-TiO₂ is developed as a simple and efficient photocatalyst for H₂O₂ production under ultraviolet light. The Au/F-TiO₂ photocatalyst avoids the necessity of adding fluoride into the reaction medium for enhancing H₂O₂ synthesis, as in a pure TiO₂ reaction system. The F⁻ modification inhibits the H₂O₂ decomposition through the formation of the ≡Ti–F complex. Au is an active cocatalyst for photocatalytic H₂O₂ production. We compared the activity of TiO₂ with F⁻ modification and without F⁻ modification in the presence of Au, and found that the H₂O₂ production rate over Au/F-TiO₂ reaches four times that of Au/TiO₂. In situ electron spin resonance studies have shown that H₂O₂ is produced by stepwise single-electron oxygen reduction on the Au/F-TiO₂ photocatalyst.     

Metabolite identification of tanshinol borneol ester in rats by high‐performance liquid chromatography combined with electrospray ionization quadrupole time‐of‐flight mass spectrometry

Tanshinol borneol ester (DBZ) is a potential drug candidate composed of danshensu and borneol. It shows anti‐ischemic and anti‐atherosclerosis activity. However, little is known about its metabolism in vivo. This research aimed to elucidate the metabolic profile of DBZ through analyzing its metabolites using high‐performance liquid chromatography combined with electrospray ionization quadrupole time‐of‐flight mass spectrometry. Chromatographic separation was performed on an Agilent TC‐C₁₈ column (150 × 4.6 mm, 5.0 μm) with gradient elution using methanol and water containing 0.2% (v/v) formic acid as the mobile phase. Metabolite identification involved analyzing the retention behaviors, changes in molecular weights and MS/MS fragment patterns of DBZ and its metabolites. As a result, 20 potential metabolites were detected and tentatively identified in rat plasma, urine and feces after administration of DBZ. DBZ could be metabolized to O‐methylated DBZ, DBZ‐O‐glucuronide, O‐methylated DBZ‐O‐glucuronide, hydroxylated DBZ and danshensu. Danshensu, a hydrolysis product of DBZ, could further be transformed into 12 metabolites. The proposed method was confirmed to be a reliable and sensitive alternative for characterizing metabolic pathways of DBZ and providing valuable information on its druggability.     

A novel low-loss four-bit bandpass filter using RF MEMS switches

This paper details the design and simulation of a novel low-loss four-bit reconfigurable bandpass filter that integrates microelectromechanical system(MEMS)switches and comb resonators.A T-shaped reconfigurable resonator is reconfigured in a'one resonator,multiple MEMS switches'configuration and used to gate the load capacitances of comb resonators so that a multiple-frequency filtering function is realized within the 7-16 GHz frequency range.In addition,the insertion loss of the filter is less than 1.99 dB,the out-of-band rejection is more than 18.30 dB,and the group delay is less than 0.25 ns.On the other hand,the size of this novel filter is only 4.4 mm×2.5 mm×0.4 mm.Our results indicate that this MEMS reconfigurable filter,which can switch 16 central frequency bands through eight switches,achieves a low insertion loss compared to those of traditional MEMS filters.In addition,the advantages of small size are obtained while achieving high integration.