Amelioration of methane yield in cheese whey fermentation by controlling the pH of the methanogenic stage

A two-stage, no-mix anaerobic digester of 145 L capacity was used to investigate the effect of controlling the pH of the methanogenic stage on the biogas production and the pollution potential reduction of acid cheese whey. The digester was operated at a 15-d hydraulic retention time, and a temperature of 35°C. Controlling the pH of the methanogenic stage increased the biogas production rate and methane yield by 77.77 and 289.00%, respectively. Reductions of up to 32.19, 44.44, and 35.86% in the COD, solids and nitrogen were achieved.     

Bubble particle heterocoagulation under turbulent conditions

An analytical model that enables the calculation of the flotation rate constant of particles as a function of particle size with, as input parameters, measurable particle, bubble, and hydrodynamic quantities has been derived. This model includes the frequency of collisions between particles and bubbles as well as their efficiencies of collision, attachment, and stability. The generalized Sutherland equation collision model and the modified Dobby-Finch attachment model developed previously for potential flow conditions were used to calculate the efficiencies of particle-bubble collision and attachment, respectively. The bubble-particle stability efficiency model includes the various forces acting between the bubble and the attached particle, and we demonstrate that it depends mainly on the relative magnitude of particle contact angle and turbulent dissipation energy. The flotation rate constants calculated with these models produced the characteristic shape of the flotation rate constant versus particle size curve, with a maximum appearing at intermediate particle size. The low flotation rate constants of fine and coarse particles result from their low efficiency of collision and low efficiencies of attachment and stability with gas bubbles, respectively. The flotation rate constants calculated with these models were compared with the experimental flotation rate constants of methylated quartz particles with diameters between 8 and 80 micro m interacting with gas bubbles under turbulent conditions in a Rushton flotation cell. Agreement between theory and experiment is satisfactory.     

A class of transformed Markov processes

This paper considers some properties of a class of transformed Markov processes. The analogy with Whittle's relaxed Markov process is pointed out. Some applications of the transformed Markov processes to queueing networks are described     

Field ion microscope observations of surface rearrangement and oxide formation at clean rhenium surfaces heated in oxygen

The interaction between oxygen and clean, well-ordered rhenium surfaces has been investigated in the field ion microscope over a wide range of temperatures. The surface structure of vacuum annealed specimens was extensively modified by the presence of adsorbed oxygen. At partial monolayer coverages, surface metal atom rearrangement was inhibited, particularly at {112?2}, but at coverages near saturation, facets were produced at {101?0} at a lower temperature than on the clean surface, resulting in the exposure of an increased proportion of closepacked surface structures and suggesting a change in the rearrangement mechanism at high coverages. The production of facets at the major poles was temperature and coverage dependent as a result of the varying influence of adsorbed oxygen on surface free energy. A decrease in oxygen coverage was observed at 1200–1300 K on near-saturated surfaces, which may be associated with the formation of volatile ReO₃ from regions where oxygen concentration exceeds a critical value. There was little evidence of the production of a discrete surface oxide phase formed on specimens heated in the presence of gas phase oxygen, but a reduction in specimen radius as a result of volatile oxide formation was observed at pressures greater than 10^?4 Torr and temperatures above 1400 K. It is concluded that the final structure of rhenium surfaces heated in oxygen is dependent upon the rate of oxide formation, the effective oxygen coverage during oxidation, and the extent of surface rearrangement.     

The in situ cleaning of specimens in the field ion microscope by argon ion bombardment

The extensive adoption of argon bombardment cleaning techniques for specimens used in LEED and Auger studies, and the frequent, and often difficult, requirement of preparing field ion emitters, and their supports, free from contamination, led to the investigation of in situ argon ion bombardment of specimens in the field of ion microscope, both from the point of view of the efficiency of the cleaning process, and the investigation of ensuing surface and lattice damage, a task to which the technique of field ion microscopy is particularly appropriate.Experiments were carried out in some detail for tungsten specimens, and subsequently extended to the hexagonal metal, rhenium, with a view to obtain information on the thermally annealed end forms of such metals. In both cases, very small radius clean thermally annealed specimens could be prepared.     

An electron microscope study of tin dioxide and antimony-doped tin dioxide

Crystals of tin dioxide, SnO₂, have been grown pure or doped with a few percent of antimony using vapor growth methods in order to investigate the microstructures of reduced and oxidized SnO₂. They were examined by X-ray diffraction and by optical and electron microscopy. SnO₂ crystals were found to contain few faults, but the antimony-doped crystals were extensively twinned in some regions. Reduction of SnO₂ crystals to yield CS phases was unsuccessful. These results are discussed in terms of the known crystal chemistry of the oxides involved.     

Cycloaddition Reactions of 7‐Benzylidenecycloocta‐1,3,5‐triene with Ethenetetracarbonitrile and 4‐Phenyl‐3H‐1,2,4‐triazole‐3,5(4H)‐dione

An (E)/(Z) mixture (3 : 2) of 7‐benzylidenecycloocta‐1,3,5‐triene ( 5 ) is obtained when 1‐benzylcycloocta‐1,3,5,7‐tetraene ( 7 ), prepared by an improved procedure, is treated with t‐BuOK in THF. Alternatively, a ca. 9 : 1 mixture (E)/(Z)‐ 5 can be prepared in a Wittig reaction involving benzaldehyde and cycloocta‐2,4,6‐trien‐1‐ylidenetriphenylphoshorane ( 9 ). Treatment of (E)/(Z)‐ 5 88 : 12 with ethenetetracarbonitrile (TCNE) gave a complex mixture of products, from which seven mono‐adducts and two bis‐adducts were isolated (Sect. 2.2.1). Of the mono‐adducts, four are π4+π2 adducts: two ((E)‐ and (Z)‐isomers) are derived from valence tautomers of the two isomers of (E)/(Z)‐ 5 , while it is tentatively suggested that the other two (again (E)‐ and (Z)‐isomers) are formed from the intermediacy of a pentadienyl zwitterion (Sect. 2.3). The remaining three mono‐adducts, two of which are epimers, are π8+π2 adducts. It is suggested that they are derived from the intermediacy of homotropylium zwitterions (Sect. 2.3). For the two bis‐adducts, it is postulated that they are derived from an initial π2+π2 cycloaddition involving the homotropylium zwitterions followed by π4+π2 cycloaddition to the valence tautomer of each of the π2+π2 cycloadducts. With 4‐phenyl‐3H‐1,2,4‐triazole‐3,5(4H)‐dione ( 6 ), (E)/(Z)‐ 5 91 : 9 yielded two π4+π2 cycloadducts ((E)‐ and (Z)‐isomers) as well as two epimeric π8+π2 cycloadducts (Sect. 2.2.2). The intermediacy of pentadienyl (tentative suggestion) and homotropylium zwitterions accounts for the formation of the products (Sect. 2.3).     

Mechanistic investigations on the reaction between 1,2-dioxines and bulky stabilized phosphorus ylides: an efficient route to closely related cyclopropane stereoisomers.

The bulky stabilized ylides (2a-d) react with a range of 1,2-dioxines (1a-d) to afford the diversely functionalized cyclopropanes 7 in excellent yield and diastereomeric excess. This is in direct contrast to the situation when nonbulky ester ylides are utilized which results in a completely different cyclopropyl series. Through a combination of isolation, spectroscopic, temperature, and deuterium and additive effects studies, the mechanism of cyclopropane formation from this second pathway can be proposed. Importantly, enolate quenching of the intermediate 1-2lambda(5)-oxaphospholanes 4 prior to collapse results in an equilibrium mixture of intermediates 10 and 11 which have been fully characterized, and their formation is primarily a result of the steric bulk of the stabilized ester ylide. These intermediates (10/11) then collapse further and result in formation of the observed closely related cyclopropyl stereoisomers 7 and 8. Moreover, the addition of LiBr to these reactions allows for the control of which of the two possible cyclopropanation pathways will be dominant. Finally, optimal protocols that demonstrate the potential of this new cyclopropanation methodology for the ready construction of closely related cyclopropyl stereoisomers are presented.