Phase rotation scheme of laser-produced ions for reduction of the energy spread

In order to widely spread out particle beams utilized in cancer therapy, laser-produced ions are developed as the injection beam for an ion synchrotron dedicated for cancer therapy. Such a laser ion source is expected to contribute largely to the realization of compactness of the size and low cost of the cancer therapy accelerator. The energy spectrum of the laser-produced ions, however, has no peak, but their intensities decrease exponentially according to the increase of the energy. For the purpose of modifying such a situation, we have proposed a scheme to rotate the beam in the longitudinal phase space with the use of the RF electric field, which is phase-adjusted with the pulse laser. We aim for a reduction of the energy spread of ± 5% selected by an energy analyzer and slits to ±1% by such phase rotation. For this purpose, a quarter wavelength resonator with two gaps with the same resonant frequency as the source laser has already been fabricated, together with its RF power source. The above phase rotation system and its recent experimental realization are presented.     

Observation of p(1×1)-type rows on TiO2(110)-p(1×2) surface by scanning tunneling microscope (STM)

The TiO₂(110) surfaces were observed by a Scanning Tunneling Microscope (STM). We found two types of bright p(1×1)-type rows on the p(1×2) surface. One p(1×1)-type formed independently and corresponds to the bridging oxygen rows. The second p(1×1)-type appeared in a bright grouping, forming narrow rows, and corresponds to the five-fold titanium rows. The above results suggest the following two conclusions. First, the density of state (DOS) on the bridging oxygen rows becomes higher than that on the five-fold titanium atom rows when a bridging oxygen row exists independently on the p(1×2) surface. Second, the bright rows on a TiO₂(110)-p(1×1) surface correspond to the five-fold titanium atom rows. The results further show the validity of DOS calculations on the TiO₂(110)-p(1×1) surface by Diebold et al. [Phys. Rev. Lett. 77 (1996) 1322]. The difference of width for Ti₂O₃ unit rows on the p(1×2) and p(1×3) surfaces in STM images are also discussed.     

Probing surface properties and glass-liquid transition of amorphous solid water: temperature-programmed TOF-SIMS and TPD studies of adsorption/desorption of hexane

The interaction of hexane with amorphous solid water has been investigated in terms of the surface diffusion, hydrogen bond imperfections, hydrophobic hydration, crystallization, and glass-liquid transition. The hexane exhibits two main peaks in temperature-programmed desorption: one is ascribed to a complex formed at the surface or subsurface sites (135 K) and the other is caused by a bulk complex (165 K). The latter is associated with the presence of frozen-in imperfections in hydrogen bonds and formed provided that the annealing temperature of the film is below 130 K, whereas the former is created even when the film is annealed up to 150 K. Thus, the hexane-water interaction is hardly characterized by simple physisorption. The hexane is incorporated in the bulk during reorganization of hydrogen bonds due to rotational and translational diffusions of water molecules above 120-140 K, whereas the surface complex is formed even below 120 K due to the surface diffusion of molecules. The film undergoes abrupt dewetting at 165 K as a consequence of the glass-liquid transition. The slow evolution of the fluidity in the supercooled liquid phase may be responsible for the delay of the structural relaxation (165 K) relative to the onset of the translational molecular diffusion (135-140 K).     

Geometric modeling and validation of twist drills with a generic point profile

Traditionally, twist drills with a few specific point geometry, such as planar, conical, cylindrical, ellipsoidal or hyperboloidal, have been designed and adapted for specific applications. Using CAD, the point geometry can be given a generic definition which will enhance the freedom to design drills with different point profiles and optimize them for multiple objectives. Such a definition can also be used for several downstream applications. This paper presents a methodology to model the twist drills with generic point geometry using NURBS. To begin with, a detailed basic model for a fluted twist drill with sectional geometry made up of arcs and straight lines has been presented in terms of bi-parametric surface patches. The coordinates of cutting lips and chisel edge of the drill have been obtained as solution to a surface-curve intersection problem using optimization algorithm. Subsequently, the model has been generalized by employing NURBS to represent the curves whereby the cutting edges and angles can be altered simply by changing the control points or their respective weights. Using this methodology, the generic definitions of the conventional angles on the drill point have been derived and presented. The proposed model has been illustrated in MATLAB environment and validated experimentally for a conical and an arbitrary point geometry. The experiments show a good conformity with the theoretical evaluations.     

A Markov Modulated Dynamic Contagion Process with Application to Credit Risk

Journal of Statistical Physics - Self-exciting point processes are applied to various fields such as seismology, finance, neurophysiology, criminology, biology etc to model the clustering/contagion...     

MHD natural convection in inclined wavy annulus utilizing hybrid nanofluid with discrete wavy coolers

Journal of Thermal Analysis and Calorimetry - In the present framework, the combined effect of magnetic field (Hartmann number, Ha), angle of inclination $$(\alpha )$$ , nanoparticle volume...     

Rotary disc bioreactor-based approach for bacterial nanocellulose production using Gluconacetobacter xylinus NCIM 2526 strain

Bacterial nanocellulose (BNC) is an indomitable biomaterial of utmost usage in different technological areas. Previously, the BNC production has been reported in the simplified bioreactors. Thus, pioneering bioreactor-assisted strategies are desirable for the commendable BNC production. Advanced bioreactors must be corroborated along with different bacterial strains to obtain creditable BNC yield. This study deals with BNC production in rotary disc bioreactor (RDBR) using Gluconacetobacter xylinus NCIM 2526 strain. RDBR-based production of BNC provided 189?±?14 gL^?1 of wet BNC, i.e., equivalent to 6.6?±?0.3 gL^?1 dry BNC yield in 10 days. However, in static cultivation mode, 56?±?12 gL^?1 wet weight of BNC, corresponding to 2.4?±?0.4 gL^?1 dry weight, was produced. Thus, BNC production was approximately 2.75 folds higher in RDBR than statically produced BNC from the same volume of the media. The sugar to BNC conversion yield (12.2?±?0.8%) was doubled in RDBR-based production as compared to static BNC production (6.2?±?1.4%) with efficient sugar consumption (90.0?±?3.3%). The maximum amount of BNC was produced at 7 RPM and pH 6. RDBR-based BNC showed a more hydrophilic nature than statically produced BNC. The RDBR might be appropriate for large-scale BNC production, especially for wet-end applications, as an ample amount of BNC can be produced from a single fermentation process. These BNC pellicles might have the potential for biomedical applications like wound dressings, biofacial masks, hydrogels, and tissue engineering scaffolds.

     

One-dimensional beam ordering of protons in a storage ring

The ordering of protons has been observed at a new storage ring, S-LSR, at Kyoto University. Abrupt jumps in the momentum spread and the Schottky noise power were observed for protons for the first time at a particle number of approximately 2000, upon applying electron cooling with electron currents of 25, 50, and 100 mA. The transition temperature was 0.17 and 1 meV in the longitudinal and transverse directions, respectively. The transverse temperature of the proton beam was much below that of electrons at the transition, which played an essential role in the ordering of protons.