太阳风等离子体输出流量的全日面二维结构

本文根据1983年十个 Carrington 周(1733—1742)期间的 K-日冕亮度、行星际闪烁(IPS)观测和光球磁场观测,首次探讨了太阳风等离子体质量、动量和能量输出流量 F_M,F_P 和 F_E 的全日面二维平均结构及其与光球磁场结构的关系.     

Synthesis and formulation of vinyl-containing polyacids for improved light-cured glass-ionomer cements

Vinyl-containing poly(acrylic acid-co-itaconic acid) copolymers were synthesized and used to formulate light-curable cements containing reactive glass fillers (Fuji II LC). The conditions for light curing were studied and optimized. Effects of molecular weight (MW), grafting ratio, comonomer, liquid composition, powder/liquid (P/L) ratio, glass powder and aging were evaluated. The results show that the vinyl-containing glass-ionomer cements (GICs) prepared in this study exhibit higher compressive strength (CS, 225.6 MPa), diametral tensile strength (DTS, 28.4 MPa) and much higher flexural strength (FS, 116.4 MPa), as compared to commercial Fuji II LC GIC (186.6 in CS, 19.1 in DTS and 57.1 in FS). The optimal light-exposure time was found to be around 10 min, and concentrations of CQ and DC were 0.5% (by weight) and 1.0%, respectively. Effects of MW, grafting ratio, P/L ratio and content of polymer in the liquid formulation were significant. The highest strengths were found for the optimal formulations where the MW was 15,000 (weight average), grafting ratio 25 mol%, P/L ratio 2.7 and liquid composition 50:20:30. During aging, the cement showed an increase of strength over the first week and then no change for a month. SEM analysis suggests that more integrated microstructures and smaller glass particles can lead to higher FS and higher polymer content in GICs leads to tough fracture surface and plastic deformation.     

Synthesis of amino acid-containing polyacids and their application in self-cured glass-ionomer cement

Six methacrylate or acrylate derivatives of natural amino acids were synthesized and characterized. Based upon these monomers, six terpolymers [poly(acrylic) acid-co-itaconic acid-co-amino acid] were prepared and characterized. The synthesized polymers were used to formulate glass-ionomer cements (GICs) using Fuji II glass filler. The effects of the molecular weight (MW) and powder/liquid (P/L) ratio were evaluated. Scanning electron microscopy (SEM) was used to examine the fracture surfaces of the selected cement specimens. Results show that all the amino acid modified GICs exhibited higher compressive strengths (CS, 193-236 MPa) and much higher flexural strengths (FS, 55-71 MPa) as compared to commercial Fuji II GIC (191 in CS and 16 in FS). Both MW and P/L ratio affected the strength of the formed cement. It was important to find the optimal MW and P/L ratio to obtain the highest FS. In this study, optimized MW (number average) of the polyacids and P/L ratio were around 50,000 and 2.7/1, respectively. The microstructures of the fracture surfaces helped to explain the strength differences among the materials tested in the study. SEM analysis suggests that more integrated microstructures and fewer defects can lead to higher FS.     

Microwave assisted synthesis of Py-Im polyamides

Microwave synthesis was utilized to rapidly build Py-Im polyamides in high yields and purity using Boc-protection chemistry on Kaiser oxime resin. A representative polyamide targeting the 5'-WGWWCW-3' (W = A or T) subset of the consensus Androgen and Glucocorticoid Response Elements was synthesized in 56% yield after 20 linear steps and HPLC purification. It was confirmed by Mosher amide derivatization of the polyamide that a chiral α-amino acid does not racemize after several additional coupling steps.     

使用色散可调啁啾光纤光栅在常规单模光纤中实现超过100km,10Gb/s的转输 *

报道了用简单的应力方法使均匀光栅成为线性啁啾光纤光栅的技术 ,并推导出了相应理论 ,发现最大色散补偿带宽与色散的乘积近似为常数 .在常规单模光纤G652,10Gb/s系统中实现超过100km的色散补偿 .     

锂离子电池硅基负极材料的研究进展

硅基材料是新一代高容量锂离子蓄电池负极材料的典型代表,近年来已成为理论研究和应用研究的热点.本文介绍了锂离子电池硅基负极材料的制备方法、电化学性能及其研究现状,分析了硅材料作为锂离子电池负极材料存在的问题;讨论了硅材料作为锂离子电池负极材料的研究前景.并指出若能克服目前存在问题,将有望成为新一代锂离子电池负极材料.     

On the singularity of Green's tensor for a perfectly conducting semi-infinite cone

This paper is intended to clarify a misunderstanding concerningthe source singularity of the electric Green's tensor for aperfectly conducting semi-infinite cone of circular cross-section.Tai's series expansion of the Green's tensor is known to lacka singular term at the source region. Jones has reconstructedthe solution to this problem and has pointed out the differencebetween his result and that of Tai. The aim of our paper isto demonstrate that, although Jones's closed-form solution iscorrect, there is a mistake in his comparison with Tai's seriessolution. We conclude that one of the two additional singularterms that Jones claims as missing from Tai's formula must beomitted. Besides, we compare Jones's closed-form solution withSmyshlyaev's solution to the very same problem. We concludethat the magnetic field expressions given by Jones and Smyshlyaevcoincide, but a singular term is missing from Smyshlyaev's expressionfor the electric field.     

三维光存储中折射率失配引起的球差补偿

为实现三维光存储中折射率失配引起的球差补偿,建立了光学存储系统模型,获得了折射率失配引起的波前偏差函数与存储深度的表达式.采用泽尔尼克循环多项式对波前偏差函数进行补偿展开.在双光子荧光和单光子共焦荧光读出方式下,均可获得读出荧光强度与存储深度的关系:在折射率失配引起的球差未得到补偿矫正的情况下,存储深度在200 μm左右读出荧光强度基本上下降为零;当折射率失配引起的初级球差被补偿矫正后,读出荧光强度随存储深度的下降得到较好改善;当折射率失配引起的二级球差被补偿矫正后,存储深度在1 mm内存储点强度随深度基本上没有明显地变化.并且对像差补偿方法进行了具体地分析.