Characterization of Mercury – Humic Acids Interaction by Potentiometric Titration with a Modified Carbon Paste Mercury Sensor

Stability constant for mercury binding by commercial and natural humic acids (HA) were determined using a new potentiometric mercury(II) sensor based on dithiosalicylic acid modified carbon paste electrode. The sensor present a high selective and sensitive response to mercury(II) ions, and a low detection limit of 1.8×10^?8 M. The potentiometric titrations curves of humic acids against mercury(II) ions were modeled. For 1.00×10^?7 to 3.00×10^?4 M mercury(II) ion concentration levels the results are consistent with the presence of two different binding sites in the humic acid macromolecule. The strongest binding sites (log K₁ ranging from 10.1 to 6.8) are probably due to interaction with carboxylic acid and amine groups in the molecule, whereas weakest binding sites (log K₂ ranging from 8.8 to 4.5) can be associated to phenolic groups.     

Effects of palmitic acid and cholesterol on proton transport across black lipid membranes

We studied the effect of palmitic acid (PA) and cholesterol (approximately 17 wt.%) on proton translocation across asolectin (charged) and diphytanoylphosphatidylcholine (DPhPC, neutral) black lipid membranes (BLMs). Potential difference (PD), short circuit current (SCC), and conductance (G(total)) were measured with a digital electrometer. Membranes were exposed to pH gradients (0.4-2.0 units), followed by PA addition to bath (symmetrically, 40-65 microM). The membrane conductive pathway was subdivided into an unspecific and a proton-related routes. A computer program estimated the conductances (G(un) and G(H)) of the two pathways from the measured parameters. No significant differences in proton selectivity were found between DPhPC membranes and DPhPC/cholesterol membranes. By contrast, cholesterol incorporation into asolectin increases membranes selectivity to proton. Cholesterol dramatically reduced G(un) reflecting, probably, its ability of inducing order in lipid chains. In asolectin membranes, PA increases proton selectivity, probably by acting as a proton shuttle according to the model proposed by Kamp and et al. [Biochemistry 34 (1995) 11928]. Cholesterol incorporation into asolectin membranes eliminates the PA-induced increase in proton selectivity. In DPhPC and DPhPC/cholesterol membranes, PA does not affect proton selectivity. These results are discussed in terms of the presence of cardiolipin (CL) in asolectin, cholesterol/PA interactions, and cholesterol order-inducing effects on acyl-chains.     

Synthesis and reactivity of silyl ruthenium complexes: the importance of trans effects in C-H activation,Si-C bond formation,and dehydrogenative coupling of silanes

A series of octahedral ruthenium silyl hydride complexes, cis-(PMe(3))(4)Ru(SiR(3))H (SiR(3) = SiMe(3), 1a; SiMe(2)CH(2)SiMe(3), 1b; SiEt(3), 1c; SiMe(2)H, 1d), has been synthesized by the reaction of hydrosilanes with (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5), cis-(PMe(3))(4)RuMe(2) (6), or (PMe(3))(4)RuH(2) (9). Reaction with 6 proceeds via an intermediate product, cis-(PMe(3))(4)Ru(SiR(3))Me (SiR(3) = SiMe(3), 7a; SiMe(2)CH(2)SiMe(3), 7b). Alternatively, 1 and 7 have been synthesized via a fast hydrosilane exchange with another cis-(PMe(3))(4)Ru(SiR(3))H or cis-(PMe(3))(4)Ru(SiR(3))Me, which occurs at a rate approaching the NMR time scale. Compounds 1a, 1b, 1d, and 7a adopt octahedral geometries in solution and the solid state with mutually cis silyl and hydride (or silyl and methyl) ligands. The longest Ru-P distance within a complex is always trans to Si, reflecting the strong trans influence of silicon. The aptitude of phosphine dissociation in these complexes has been probed in reactions of 1a, 1c, and 7a with PMe(3)-d(9) and CO. The dissociation is regioselective in the position trans to a silyl ligand (trans effect of Si), and the rate approaches the NMR time scale. A slower secondary process introduces PMe(3)-d(9) and CO in the other octahedral positions, most likely via nondissociative isomerization. The trans effect and trans influence in 7a are so strong that an equilibrium concentration of dissociated phosphine is detectable (approximately 5%) in solution of pure 7a. Compounds 1a-c also react with dihydrogen via regioselective dissociation of phosphine from the site trans to Si, but the final product, fac-(PMe(3))(3)Ru(SiR(3))H(3) (SiR(3) = SiMe(3), 4a; SiMe(2)CH(2)SiMe(3), 4b; SiEt(3), 4c), features hydrides cis to Si. Alternatively, 4a-c have been synthesized by photolysis of (PMe(3))(4)RuH(2) in the presence of a hydrosilane or by exchange of fac-(PMe(3))(3)Ru(SiR(3))H(3) with another HSiR(3). The reverse manifold - HH elimination from 4a and trapping with PMe(3) or PMe(3)-d(9) - is also regioselective (1a-d(9)() is predominantly produced with PMe(3)-d(9) trans to Si), but is very unfavorable. At 70 degrees C, a slower but irreversible SiH elimination also occurs and furnishes (PMe(3))(4)RuH(2). The structure of 4a exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si...HRu interactions are not indicated in the structure or by IR, the HSi distances (2.13-2.23(5) A) suggest some degree of nonclassical SiH bonding in the H(3)SiR(3) fragment. Thermolysis of 1a in C(6)D(6) at 45-55 degrees C leads to an intermolecular CD activation of C(6)D(6). Extensive H/D exchange into the hydride, SiMe(3), and PMe(3) ligands is observed, followed by much slower formation of cis-(PMe(3))(4)Ru(D)(Ph-d(5)). In an even slower intramolecular CH activation process, (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5) is also produced. The structure of intermediates, mechanisms, and aptitudes for PMe(3) dissociation and addition/elimination of H-H, Si-H, C-Si, and C-H bonds in these systems are discussed with a special emphasis on the trans effect and trans influence of silicon and ramifications for SiC coupling catalysis.     

Simple and efficient chemoselective mild deprotection of acetals and ketals using cerium(III) triflate

A new and chemoselective method for the cleavage of alkyl and cyclic acetals and ketals at room temperature in wet nitromethane by using catalytic cerium(III) trifluoromethane sulfonate is presented. The high yields, the observed selectivity, the very gentle reaction conditions, and the almost neutral pH make this procedure particularly attractive for multistep synthesis.     

Gårding's Theory of Hyperbolic Polynomials

This paper presents a simple, self‐contained account of Gårding's theory of hyperbolic polynomials, together with a recent convexity result of Bauschke‐Güler‐Lewis‐Sendov and an inequality of Gurvits. This account begins by establishing some new results. The first concerns the existence of a pointwise arrangement of the eigenvalues so that they become global real analytic functions. The second asserts that the associated “branches” are independent of the choice of hyperbolic direction. © 2013 Wiley Periodicals, Inc.     

Thermal Characterizations of Inorganic and Organometallic Polymers

This review emphasizes the breadth of metallic and metallic-like polymers evaluated as to thermal properties. Techniques usefully applied to particular systems are noted with the aim of suggesting their application to other systems.     

Low-lying energy levels of the FeH molecule

Multireference configuration interaction (MRCI) and complete active space second-order perturbation theory (CASPT2) calculations are performed on Fe₂ and Fe^? ₂. Although it is not possible to definitively identify the ground states of Fe₂ and Fe^? ₂, the calculations suggest that the ground state of Fe^? ₂ in ⁸Σ^? _u derived from 3d¹³4σ² _g4σ² _u and that the states observed in photodetachment are the ⁹Σ^? _g and ⁷Σ^? _g states with a 3d¹³4σ² _g4σ¹ _u occupation, but that the ground state of Fe₂ is ⁷Δ_u(3d¹⁴4σ² _g) and is not observed in the photo-detachment spectra.     

Data Formats for Elementary Gas Phase Kinetics,Part 1: Unique Representations of Species at the Molecular Level

Standardized electronic formats for data are needed to efficiently and transparently communicate the results of scientific studies. A format for the unique identification of chemical species is a requirement in the field of chemistry, and the IUPAC International Chemical Identifier (InChI) has been widely adopted for this purpose. The InChI identifier has proved to be very useful. The InChI identifier, however, is currently insufficient to uniquely specify some types of molecular entities at a detailed molecular level needed to fully characterize their chemical nature, to differentiate between chemically distinct conformers, to uniquely identify structures used in quantum chemical calculations, and to completely describe elementary chemical reactions. To address this limitation, we propose an augmented form of InChI, denoted as InChI–ER, which contains additional optional layers that allow the unique and unambiguous identification of molecules at a detailed molecular level. The new layers proposed herein are optional extensions of the existing InChI formalism and, like all other InChI layers, would not interfere with InChI identifiers currently in use. The focus of the present work is the better specification of required molecular entities such as rotational conformations, ring conformations, and electronic states. In companion articles, we propose additional reaction layers using an extended InChI format that will enable the unique identification of elementary chemical reactions, including specification of associated transition states, specification of the changes in bonds that occur during reaction, and classification of reaction types.