Complexation of Macrocyclic Compounds with Silver Ions in Surfactant Media

This paper is a report on the complexation studies of silverions with certain water soluble crown ethers viz., 15-crown-5,18-crown-6, cyclam, diaza 15-crown-5 and certain water insolublecrown ethers viz., benzo 15-crown-5, dibenzodiaza 15-crown-4,dibenzyldiaza 18-crown-6 in some nonionic surfactants viz.,polyoxyethylated alkyl phenol (TX 100), polyoxyethylene (20)sorbiton monolaurate (Tween 20), polyoxyethylene (20) sorbitonmonoleate (Tween 80) and polyoxyethylated glyco monolaurylether (Brij 35) by potentiometry. In addition, conductometry wasalso used to study the complexation of oxa crown ethers to comparethe results obtained by potentiometry, which were found to be ingood agreement with each other. The complexation studies indicate1:1 complex formation between the silver ion and macrocycle, thelog_ML ⁿ⁺ values being in the range 1 to 9.     

Extractive spectrophotometric determination of Cobalt(II) in synthetic and pharmaceutical samples using Cyanex 923.

Cyanex 923 has been proposed as a sensitive analytical reagent for the direct extractive spectrophotometric determination of cobalt(II). Cobalt(II) forms a blue-colored complex with Cyanex 923 in the organic phase. The maximum absorbance of the complex is measured at 635 nm. Beer's law was obeyed in the range 58.9 - 589.0 microg of cobalt. The molar absorptivitiy and Sandell's sensitivity of the complex was calculated to be 6.79 x 10920 l mol(-1) cm(-1) and 0.088 microg cm(-2), respectively. The nature of the extracted species was found to be Co(SCN)2 x 2S. An excellent linearity with a correlation coefficient value of 0.999 was obtained for the Co(II)-Cyanex 923 complex. Stability and regeneration of the reagent (Cyanex 923) for reuse is the main advantage of the present method. The method was successfully applied to the determination of cobalt in synthetic mixtures and pharmaceutical samples was found to give values close to the actual ones. Standard alloy samples, such as high-speed tool BCS 484 and 485, have been tested for the determination of cobalt for the purpose of validating the present method. The results of the proposed method are comparable with atomic absorption spectrometry and were found to be in good agreement.     

Synthesis and characterization of poly(dimethylsiloxane‐urethane) elastomers: Effect of hard segments of polyurethane on morphological and mechanical properties

A series of poly(dimethylsiloxane‐urethane) elastomers based on hexamethylenediisocyanate, toluenediisocyanate, or 4,4′‐methylenediphenyldiisocyanate hard segment and polydimethylsiloxane (PDMS) soft segment were synthesized. In this study, a new type of soft‐segmented PDMS crosslinker was synthesized by hydrosilylation reaction of 2‐allyloxyethanol with polyhydromethylsiloxane, using Karstedt's catalyst. The synthesized soft‐segmented crosslinker was characterized by FT‐IR, ¹H, and ¹³C NMR spectroscopic techniques. The mechanical and thermal properties of elastomers were characterized using tensile testing, thermogravimetric analysis, differential scanning calorimetry (DSC), and dynamical mechanical analysis measurements. The molecular structure of poly(dimethylsiloxane‐urethane) membranes was characterized by ATR‐FTIR spectroscopic techniques. Infrared spectra indicated the formation of urethane/urea aggregates and hydrogen bonding between the hard and soft domains. Better mechanical and thermal properties of the elastomers were observed. The restriction of chain mobility has been shown by the formation of hydrogen bonding in the soft and hard segment domains, resulting in the increase in the glass‐transition temperature of soft segments. DSC analysis indicates the phase separation of the hard and soft domains. The storage modulus (E′) of the elastomers was increasing with increase in the number of urethane connections between the hard and soft segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2980–2989, 2006     

A Validated Chiral LC Method for the Determination of Enantiomeric Purity of Pemetrexed Disodium on an Amylose-Based Chiral Stationary Phase

A simple and new isocratic normal phase chiral HPLC method has been developed for the determination of enantiomeric purity of pemetrexed disodium (l-enantiomer) in bulk drugs with a short run time of about 20 min. Chromatographic separation of l and d-enantiomers of pemetrexed disodium was achieved on an amylose based chiral stationary phase using a mobile phase consists of hexane, ethanol and trifluoro acetic acid. The resolution between the enantiomers was found to be more than 2.0. The system precision and method precision were found to be within 5% RSD for the distomer (d-enantiomer) at its specification level (i.e. not more than 1.0% w/w). The limit of detection and limit of quantification of distomer were 1.6 and 5 μg mL⁻¹, respectively for 10 μL injection volume. The percentage recovery of distomer was ranged from 90.6 to 105.7 in bulk drug samples. The test solution was found to be stable in the diluent for 48 h. The method was found to be specific for the enantiomers of pemetrexed disodium and can be conveniently used for the quantification of undesired d-enantiomer present in the bulk drug samples of pemetrexed disodium.     

Validated Chiral LC Method for the Enantiomeric Separation of β-Amino-β-(3-Methoxyphenyl) Propionic Acid

A chiral liquid chromatographic method for enantiomeric resolution of β-amino-β-(3-methoxyphenyl) propionic acid was developed and validated. The “hybrid” π-electron donor–acceptor based stationary phase (R,R) Whelk-01 was found to be enantiomerically selective for (R) and (S) enantiomers of β-amino-β-(3-methoxyphenyl) propionic acid with a resolution greater than 2.0. The effects of isopropyl alcohol and ethanol on enantioselectivity and resolution of enantiomers were evaluated. Calibration curves were linear over the range of 0.10–1.00, with a regression coefficient (r) of 0.999. The limit of detection (LOD) and limit of quantification (LOQ) were 300 and 1,000 ng mL⁻¹ respectively for 10 μL injection volume. The percentage RSD of the peak area of six replicate injections of (S) enantiomer at LOQ concentration was 2.8. The percentage recovery of (S) enantiomer from (R) enantiomer samples ranged from 92 to 102. The test solution was observed to be stable up to 24 h after the preparation. The developed normal phase chiral LC method can be used for the enantiomeric purity evaluation of R-β-amino-β-(3-methoxyphenyl) propionic acid.     

Gabor Analysis on Finite Product of Cyclic Groups

We present a complete characterization of Gabor frame operators on finite dimensional Hilbert space $L^2(\Gamma)$, where $\Gamma = \mathbb{Z}_{m_1} \times \mathbb{Z}_{m_2} \times \dots \times \mathbb{Z}_{m_p}$ and $m_1,m_2,\dots,m_p$ are positive integers. The notion of generalized $B$-modulation and generalized $B$-translation is introduced and some significant properties of the generalized pseudo $B$-Gabor like frames are discussed.     

Identification of Mtb GlmU Uridyltransferase Domain Inhibitors by Ligand-Based and Structure-Based Drug Design Approaches

Targeting enzymes that play a role in the biosynthesis of the bacterial cell wall has long been a strategy for antibacterial discovery. In particular, the cell wall of Mycobacterium tuberculosis (Mtb) is a complex of three layers, one of which is Peptidoglycan, an essential component providing rigidity and strength. UDP-GlcNAc, a precursor for the synthesis of peptidoglycan, is formed by GlmU, a bi-functional enzyme. Inhibiting GlmU Uridyltransferase activity has been proven to be an effective anti-bacterial, but its similarity with human enzymes has been a deterrent to drug development. To develop Mtb selective hits, the Mtb GlmU substrate binding pocket was compared with structurally similar human enzymes to identify selectivity determining factors. Substrate binding pockets and conformational changes upon substrate binding were analyzed and MD simulations with substrates were performed to quantify crucial interactions to develop critical pharmacophore features. Thereafter, two strategies were applied to propose potent and selective bacterial GlmU Uridyltransferase domain inhibitors: (i) optimization of existing inhibitors, and (ii) identification by virtual screening. The binding modes of hits identified from virtual screening and ligand growing approaches were evaluated further for their ability to retain stable contacts within the pocket during 20 ns MD simulations. Hits that are predicted to be more potent than existing inhibitors and selective against human homologues could be of great interest for rejuvenating drug discovery efforts towards targeting the Mtb cell wall for antibacterial discovery.