Biosynthesis of zinc oxide nanoparticles using Euphorbia milii leaf constituents: Characterization and improved photocatalytic degradation of methylene blue dye under natural sunlight

A facile biosynthesis route was followed to prepare zinc oxide nanoparticles (ZnO NPs) using Euphorbia milii (E. milii) leaf constituents. The SEM images exhibited presence of spherical ZnO NPs and the corresponding TEM images disclosed monodisperse nature of the ZnO NPs with diameter ranges between 12 and 20 nm. The Brunauer–Emmett–Teller (BET) analysis revealed that the ZnO NPs have specific surface area of 20.46 m²/g with pore diameter of 2 nm–10 nm and pore volume of 0.908 cm³/g. The EDAX spectrum exemplified the existence of Zn and O elements and non-appearance of impurities that confirmed pristine nature of the ZnO NPs. The XRD pattern indicated crystalline peaks corresponding to hexagonal wurtzite structured ZnO with an average crystallite size of 16.11 nm. The FTIR spectrum displayed strong absorption bands at 512 and 534 cm^?1 related to ZnO. The photocatalytic action of ZnO NPs exhibited noteworthy degradation of methylene blue dye under natural sunlight illumination. The maximum degradation efficiency achieved was 98.17% at an illumination period of 50 min. The reusability study proved considerable photostability of the ZnO NPs during photocatalytic experiments. These findings suggest that the E. milii leaf constituents can be utilized as suitable biological source to synthesis ZnO NPs for photocatalytic applications.     

An extended technicolour model for grand unification

An extended technicolour grand unification model based on the gauge groupE ₆×SU(7) extended technicolour is presented. The symmetry-breaking based on extended technicolour theory is discussed. It is shown that the existing phenomenology is well explained by the model. The strangeness changing neutral currents may not be a problem with this model.     

Mesoporous material as catalyst for the production of fine chemical: Synthesis of dimethyl phthalate assisted by hydrophobic nature MCM-41

Aluminum, iron and zinc containing MCM-41 molecular sieves were prepared by the hydrothermal method. The catalyst was characterized by the XRD, BET (surface area), FT–IR and ²⁹Si, ²⁷Al MAS–NMR techniques. The catalytic activity of these molecular sieves was tested with esterification reaction used with phthalic anhydride (PAH) and methanol (MeOH) in the autoclave at 135 °C, 150 °C and 175 °C. Conversion increases with an increase in temperature and mole ratio. The activity of these catalysts followed the order: Al-MCM-41 (112) > Fe-MCM-41 (115) > Al-MCM-41 (70) > Al-MCM-41 (52) > Fe-MCM-41 (61) > Al, Zn-MCM-41 (104) > Al-MCM-41 (30). The reaction yielded both monomethyl phthalate (MMP) and dimethyl phthalate (DMP). The nature of the catalyst sites has been proposed using with water as an impurity. The selectivity of the dimethyl phthalate increases with increase in temperature and mole ratio. The weight of the catalyst was optimized at 0.07 g. The hydrophilic and hydrophobic nature of the catalyst has been explained by the influence of water and the external surface acidity also facilitates the reaction and this has been confirmed by the supporting reaction.     

Aromatic-aromatic interactions in crystal structures of helical peptide scaffolds containing projecting phenylalanine residues

Aromatic-aromatic interactions between phenylalanine side chains in peptides have been probed by the structure determination in crystals of three peptides: Boc-Val-Ala-Phe-Aib-Val-Ala-Phe-Aib-OMe, I; Boc-Val-Ala-Phe-Aib-Val-Ala-Phe-Aib-Val-Ala-Phe-Aib-OMe, II; Boc-Aib-Ala-Phe-Aib-Phe-Ala-Val-Aib-OMe, III. X-ray diffraction studies reveal that all three peptides adopt helical conformations in the solid state with the Phe side chains projecting outward. Interhelix association in the crystals is promoted by Phe-Phe interactions. A total of 15 unique aromatic pairs have been characterized in the three independent crystal structures. In peptides I and II, the aromatic side chains lie on the same face of the helix at i/i + 4 positions resulting in both intrahelix and interhelix aromatic interactions. In peptide III, the Phe side chains are placed on the opposite faces of the helix, resulting in exclusive intermolecular aromatic interactions. The distances between the centroids of aromatic pair ranges from 5.11 to 6.86 A, while the distance of closest approach of ring carbon atoms ranges from 3.27 to 4.59 A. Examples of T-shaped and parallel-displaced arrangements of aromatic pairs are observed, in addition to several examples of inclined arrangements. The results support the view that the interaction potential for a pair of aromatic rings is relatively broad and rugged with several minima of similar energies, separated by small activation barriers.     

Electrochemically generated super-hydrophilic surfaces

The control of surface wettability of indium tin oxide (In2O3-SnO2) coated glass surfaces is studied. We report here the first observation of purely electrochemical generation of super-hydrophilic surfaces at In2O3-SnO2 electrodes in the absence of an ultraviolet illumination source. This is achieved by the application of high anodic potentials for a prolonged period. Such surfaces are reversibly converted back to their original hydrophobic state on storage in air (one or two days) or water (a week)(and vice versa). The unique character of these surfaces can be attributed to the surface structure of the hydrophilic phase.     

Binding constant measurement by hyper-Rayleigh scattering: bilirubin-human serum albumin binding as a case study

In this paper, a new application of the hyper-Rayleigh scattering technique in determining multiple binding constants of a small molecule like bilirubin to a macromolecule like the protein human serum albumin has been demonstrated. Human serum albumin has two binding sites for bilirubin, and the binding constants have been measured by carrying out a second harmonic titration of the protein against bilirubin and vice versa. The measured binding constants K(1) = 1.5 +/- 0.43 x 10(7) M(-1) and K(2) = 1.01 +/- 0.16 x 10(6) M(-1) agree well with the reported values obtained by other methods.     

A study on the mechanism of failure in keratin

The mechanical behavior of keratin is studied, focusing on the mechanism of failure. For this purpose, a new procedure has been suggested to differentiate the time-dependent and time-independent losses of energy at different strain levels. The matrix of keratin fibers was found to play an important role in the mechanism of failure.     

Analyses of carcinogenic aromatic amines released from harmful azo colorants by Streptomyces SP. SS07

Extracellular fluid protein (ECFP) of Streptomyces species SS07 has been used to reduce water soluble azo dyes and the carcinogenic amines released have been compared with that from chemical reduction. The effect of temperature, pH and contact time on the recovery of amines using ECFP was studied. The ECFP releases carcinogenic amines at a pH of 9.2 and a temperature of 37 degrees C for a contact period of 24 h. The reduction products were analyzed with HPLC and their structures confirmed by LC-MS and GC-MS. It was observed that both the ECFP and chemical reduction methods released similar type of amine products. In the case of dye samples, compared to chemical reduction, 5-20% increase in the release of carcinogenic amines by ECFP was observed. The percentage of amine products released by chemical reduction was higher for leather garment samples compared to ECFP treatment.     

Divalent transition metal complexes of 3,5-pyrazoledicarboxylate

New divalent transition metal 3,5-pyrazoledicarboxylate hydrates of empirical formula Mpz(COO)₂(H₂O)₂, where M=Mn, Co, Ni, Cu, Zn and Cd (pz(COO)₂=3,5-pyrazoledicarboxylate), metal hydrazine complexes of the type Mpz(COO)₂N₂H₄ where M=Co, Zn or Cd and Mpz(COO)₂nN₂H₄·H₂O, where n=1 for M=Ni and n=0.5 for M=Cu have been prepared and characterized by physico-chemical methods. Electronic spectroscopic data suggest that Co and Ni complexes adopt an octahedral geometry. The IR spectra confirm the presence of unidentate carboxylate anion (Δν=ν_asy(COO^–)–ν_sym(COO^–)>215 cm^–1) in all the complexes and bidentate bridging hydrazine (ν_N–N=985–950 cm^–1) in the metal hydrazine complexes. Both metal carboxylate and metal hydrazine carboxylate complexes undergo endothermic dehydration and/or dehydrazination followed by exothermic decomposition of organic moiety to give the respective metal oxides as the end products except manganese pyrazoledicarboxylate hydrate, which leaves manganese carbonate. X-ray powder diffraction patterns reveal that the metal carboxylate hydrates are isomorphous as are those of metal hydrazine complexes of cobalt, zinc and cadmium.     

Pd-Co-Mo electrocatalyst for the oxygen reduction reaction in proton exchange membrane fuel cells

The catalytic activity of carbon supported Pd-Co-Mo for the oxygen reduction reaction (ORR) in a single cell proton exchange membrane fuel cell (PEMFC) has been investigated at 60 degrees C and compared with data from commercial Pt catalyst and our previously reported Pd-Co-Au and Pd-Ti catalysts. The Pd-Co-Mo catalyst with a Pd:Co:Mo atomic ratio of 70:20:10 exhibits slightly higher catalytic activity like the Pd-Co-Au catalyst than the commercial Pt catalyst, but with excellent chemical stability unlike the Pd-Co-Au catalyst. The Pd-Co-Mo catalyst also exhibits better tolerance to methanol poisoning than Pt. Investigation of the catalytic activity of the Pd-Co-Mo system with varying composition and heat treatment temperature reveals that a Pd:Co:Mo atomic ratio of 70:20:10 with a heat treatment temperature of 500 degrees C exhibits the highest catalytic activity. Although the degree of alloying increases with increasing temperature from 500 to 900 degrees C as indicated by the X-ray diffraction data, the catalytic activity decreases due to an increase in particle size and a decrease in surface area.