Flexoelectric response at defect sites in nematic inversion walls

Electric field experiments have been carried out on +1 and ?1 defects formed in alignment inversion walls, in a planarly aligned nematic phenyl benzoate. The results show that the defects are non‐singular in the core and exhibit a flexoelectric response to an applied d.c. or low frequency a.c. field. When the c‐director flux lines are circular, as in a +1 defect in a wall parallel to the easy axis, flexoelectro‐optic switching characterized by an azimuthal angle variation is observed. When the c‐director flux is radial, the response is seemingly through polar angle variations involving no rotation of the extinction brushes due to crossed polarizers. This conclusion follows from the field‐induced structural distortions observed at a ?1 defect having a combination of radial and tangential c‐director fields.     

Thin-film polymerization and characterization of Sumitomo's Sumikasuper®-type liquid crystalline polymers

Using the thin film polymerization approach, we have studied the texture evolution when synthesizing a novel liquid crystalline polymer (LCP) system based on Sumikasuper^® LCPs. The main monomers used were p-acetoxybenzoic acid (ABA), 4,4′-biphenol (BP), isophthalic acid (IA), phthalic acid (PA) and terephthalic acid (TA). Polarizing optical microscopy (POM), FTIR, X-ray diffraction (XRD) and atomic force microscopy (AFM) were employed to study the thin film polymerization process and characterize the products. The generation and evolution of liquid crystal phases were monitored; the results revealed that there exists a composition range for the monomers to react and form liquid crystal materials. The critical temperature for LC formation in ABA/BP/IA system decreased with increasing ABA content. FTIR results confirmed the formation of polymers. AFM investigation suggested a similar process of morphological change to that observed using POM. An increasing surface roughness of the thin films with the progress of polymerization was also obtained from AFM analysis. A nematic LC texture of the polymer system was suggested by XRD examination. Results obtained by replacing BP with acetylated BP, and by conducting polymerization using two-monomer systems, suggest that BP units are included in polymers obtained by the thin film polymerization method.     

Gradient flexoelectric switching response in a nematic phenyl benzoate

We report on the inverse flexoelectric effects observed in a nematic liquid crystal with a small positive dielectric anisotropy subject to static and very low frequency (<1 Hz) a.c. fields. The Bobylev–Pikin flexobands appear at a temperature‐dependent d.c. threshold. Under square wave excitation, a new type of transient optical response occurs soon after each polarity reversal, and we ascribe it to the gradient flexoelectric distortion explicable on the basis of the presence of intrinsic double layers. This instability is characterized by a threshold voltage that decreases with temperature. Its maximum amplitude increases linearly with voltage close to threshold, and occurs after polarity reversal at a time τ_m that scales inversely as the voltage; τ_m decreases exponentially with frequency and temperature. After each polarity change, the ionic current following the charging current decreases almost exponentially to a non‐zero value; the residual current increases monotonically with the applied bias.     

Synthesis,Characterization and Properties of Single-Walled Carbon Nanohorns

Single-walled nanohorns (SWNHs) have been prepared by sub-merged arc discharge of graphite electrodes in liquid nitrogen. The samples were examined by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. Nitrogen and boron doped SWNHs have been prepared by the sub-merged arc discharge method using melamine and elemental boron as precursors. Intensification of Raman D-band and stiffening of G-band has been observed in the doped samples. The electrical resistance of the SWNHs varies in opposite directions with nitrogen and boron doping. Functionalization of SWNHs through amidation has been carried out for solubilizing them in non-polar solvents. Water-soluble SWNHs have been produced by acid treatment and non-covalent functionalization with a coronene salt. SWNHs have been decorated with nanoparticles of Au, Ag and Pt. Interaction of electron donor (tetrathiafulvalene, TTF) and acceptor molecules (tetracyanoethylene, TCNE) with SWNHs has been investigated by Raman spectroscopy. Progressive softening and stiffening of Raman G-band has been observed respectively with increase in the concentration of TTF and TCNE.     

Surfactant free fabrication of polymeric nanoparticles by combined liquid-liquid phase separation and solvent/nonsolvent mixing technology

It is generally agreed that, in most cases, surfactants are required to obtain stable polymeric nanoparticle dispersions. Here, we report a method which can be used to produce surfactant free yet stable polymeric nanoparticle dispersions. This method is based on explored mechanism of selective solvation of nanoparticles and EPD (electron pair donor)/EPA (electron pair acceptor) complexes formed among solvent and nonsolvent molecules. Using polyimide P84 (copolyimide 3,3(') 4,4(')-benzophenone tetracarboxylic dianhydride and 80% methylphenylene diamine+20% methylene dianiline) as the model polymer, this mechanism was realized through a combined liquid-liquid phase separation and solvent/nonsolvent mixing technology. Surfactant-free polyimide nanoparticles (<100 nm) were produced. Experimental details and principles of this technology were given based on the ternary diffusion, the liquid-liquid phase separation and the advanced nucleation and growth theory. Two types of methods [denoted as the forward titration method and the backward titration (BT) method] were examined. It was found that the BT method is extremely helpful to prepare polyimide nanoparticles (<100 nm). As another important aspect, explored stabilization mechanism of the resultant nanoparticle dispersions was supported by the comparative experiments, implying that selective solvation of nanoparticles and EPD/EPA complexes may play key roles in stabilization.     

X-ray emission from clusters of galaxies and cosmological parameters

Clusters of galaxies are excellent probes of cosmic structure and evolution. X-ray studies of clusters provide some of their key parameters, viz., temperature of the hot intra-cluster gas, its metallicity, X-ray luminosity and surface brightness giving mass distribution and mass-flow rate in the case of cooling flows. X-ray measurements for a large sample of clusters have lead to estimates of the total gravitating mass in them, which can be compared to the virial masses derived from dynamical considerations and gravitational lensing in some of them. X-ray derived total masses are consistent with masses obtained from the other methods after the effects due to the presence of cooling flows are taken into account in the analyses. Estimated virial masses, lack of evolution in X-ray properties, and detection of several very hot clusters at high redshifts indicate a Universe with a low value (≤ 0.3) for the Ω parameter.     

Flexoelectric response at defect sites in nematic inversion walls

Electric field experiments have been carried out on +1 and -1 defects formed in alignment inversion walls, in a planarly aligned nematic phenyl benzoate. The results show that the defects are non-singular in the core and exhibit a flexoelectric response to an applied d.c. or low frequency a.c. field. When the c-director flux lines are circular, as in a +1 defect in a wall parallel to the easy axis, flexoelectro-optic switching characterized by an azimuthal angle variation is observed. When the c-director flux is radial, the response is seemingly through polar angle variations involving no rotation of the extinction brushes due to crossed polarizers. This conclusion follows from the field-induced structural distortions observed at a -1 defect having a combination of radial and tangential c-director fields.     

Surface microcracks decoration and disclination defects of wholly aromatic liquid crystalline copolyesters

An intensive study has been conducted to map the director fields of disclination of nematic liquid crystalline copolyesters. In this study, films of two wholly aromatic main-chain polyesters containing para- (ABA/MH/TFTA) and meta-linkages (ABA/MH/TFIA) (ABA, p-acetoxybenzoic acid; MH, maleic hydrazine; TFTA, tetrafluoroterephthalic acid; TFIA, tetrafluoroisophthalic acid) were synthesized to investigate the effects of kinks on liquid crystallinity, disclination strength (S), and surface microcracks decoration. These two copolyesters were prepared by in-situ thin film polymerization and characterized by polarizing light microscope, wide-angle X-ray diffraction, as well as "rotational isomeric states" (RIS) Metropolis Monte Carlo (RMMC) simulation. An optical microscope shows that the surface microcracks forms in the nematic-mosaic texture during a rapid quenching. The ABA/MH/TFTA film exhibits disclination strength with S = +1 and S = -(1)/(2); however, disclination strengths with S = +/-1 have been observed in the ABA/MH/TFIA system. To our best knowledge, this is the first paper reporting the effects and evidence of kink (meta and para moieties) on topological defect of disclination. In addition, the RMMC analysis supports the liquid crystal formation in both polyester films with a persistence ratio greater than 6.42.     

Drifting undulations in an achiral smectic C liquid crystal driven by a static electric field

We report a novel dc field-driven propagative instability associated with the thermally induced layer undulations of the smectic C phase in a phenyl benzoate. While the undulations are two-dimensional, the drift is observed only along the wave vector q parallel to the c director; undulations with orthogonal q and c remain stable. The drift, which is nonhysteretic, takes place in a hopping way between equilibrium positions; it has a well-defined threshold in a given region, but the threshold varies rather widely for different regions. The average propagation velocity increases linearly from zero with the control parameter epsilon until epsilon approximately 2 but tends to saturate thereafter. Significantly, the drift direction reverses on switching the field polarity. The mechanism responsible for the drift appears to involve a coupling between the transverse field gradients due to the conductivity anisotropy and the transverse component of the flexoelectric polarization.     

Gas‐transport properties of indan‐containing polyimides

A series of indan‐containing polyimides were synthesized, and their gas‐permeation behavior was characterized. The four polyimides used in this study were synthesized from an indan‐containing diamine [5,7‐diamino‐1,1,4,6‐tetramethylindan (DAI)] with four dianhydrides [3,3′4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), 3,3′4,4′‐oxydiphthalic dianhydride (ODPA), (3,3′4,4′‐biphenyl tetracarboxylic dianhydride (BPDA), and 2,2′‐bis(3,4′‐dicarboxyphenyl) hexafluoropropane dianhydride (6FDA)]. The gas‐permeability coefficients of these four polyimides changed in the following order: DAI–BTDA < DAI–ODPA < DAI–BPDA < DAI–6FDA. This was consistent with the increasing order of the fraction of free volume (FFV). Moreover, the gas‐permeability coefficients were almost doubled from DAI–ODPA to DAI–BPDA and from DAI–BPDA to DAI–6FDA, although the FFV differences between the two polyimides were very small. The gas permeability and diffusivity of these indan‐containing polyimides increased with temperature, whereas the permselectivity and diffusion selectivity decreased. The activation energies for the permeation and diffusion of O₂, N₂, CH₄, and CO₂ were estimated. In comparison with the gas‐permeation behavior of other indan‐containing polymers, for these polyimides, very good gas‐permeation performance was found, that is, high gas‐permeability coefficients and reasonably high permselectivity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2769–2779, 2004