Inhibition of Quorum Sensing,Motility and Biofilm Formation of Pseudomonas aeruginosa by Copper Oxide Nanostructures

Quorum sensing (QS) is the communication between bacterial cells governed by their population density and regulated by the genes controlling virulence factors and biofilm formation. Multiple mechanisms of biofilms are resistive to antimicrobial chemotherapy; therefore novel strategies are required to overcome its limitations. Here, we report the effect of various copper oxide nanostructures (CuO-NSs) on quorum sensing inhibition. The two-dimensional CuO-NSs such as interlaced nanodiscs, nanodiscs and leaf-shaped nanosheets are prepared via a simple chemical method. The Quorum sensing inhibition (QSI) activity of all the CuO-NS are examined using reporter strain Chromobacterium violaceum CV026 and Escherichia coli pSB1142. We found that the CuO-interlaced nanodisc structures exhibit better QSI activity than nanodiscs and leaf-shaped sheets. The interlaced nanodisc structures are inhibited various long-chain N-acyl homoserine lactones (AHLs) mediated QS individually and confirmed by other QS-associated phenomena for Pseudomonas aeruginosa, including biofilm inhibition, inhibition of virulence factors such as pyocyanin, protease production and swarming motility. Thus QSI activity of CuO-NSs is solely dependent on specific shape offering large surface area and more active sites. The CuO-NS is effective quorum sensing inhibitors, which has potential clinical applications in the management of P. aeruginosa associated infections.

     

Studies on electrodeposited As2S3 thin films by double exposure holographic interferometry technique

Arsenic trisulphide (As₂S₃) thin films have been deposited onto stainless steel and fluorine doped tin oxide (FTO) coated glass substrates by electrodeposition technique using arsenic trioxide (As₂O₃) and sodium thiosulphate (Na₂S₂O₃) as precursors and ethylene diamine tetracetic acid (EDTA) as a complexing agent. Double exposure holographic interferometry (DEHI) technique was used to determine the thickness and stress of As₂S₃ thin films. It was observed that the thickness of the thin film increases whereas film stress to the substrate decreases with an increase in the deposition time. X-ray diffraction and water contact angle measurements showed polycrystalline and hydrophilic surface respectively. The bandgap energy increases from 1.82 to 2.45 eV with decrease in the film thickness from 2.2148 to 0.9492 μm.     

<Emphasis Type="Italic">Brevibacillus sp</Emphasis>: A Novel Thermophilic Source for the Production of Bile Salt Hydrolase

A thermophilic microorganism growing within the temperature range of 40–65 °C (optimum at 55 °C) was isolated from hot water springs near Konkan, Maharashtra, India. Based on 16S rDNA sequence analysis, it was concluded that the isolate belongs to the genus Brevibacillus. The present paper reports the isolation, identification, and standardization of fermentation conditions for the production of enzyme, bile salt hydrolase (EC 3.5.1.24) which is produced intracellularly at high temperatures. This is the first report regarding the production of bile salt hydrolase from a thermophilic source. Optimization of fermentation conditions resulted in a 2.9-fold enhancement in enzyme production.     

Immobilization of penicillin acylase in porous beads of polyacrylamide gel

A procedure is described for the immobilization of benzylpenicillin acylase from Escherichia coli within uniformly spherical, porous polyacrylamide gel beads. Aqueous solutions of the enzyme and sodium alginate and of acrylamide monomer, N,N'-methylene-bis-acrylamide, N,N,N,N'-tetramethylethylenediamine (TEMED) and sodium alginate are cooled separately, mixed, and dropped immediately into ice-cold, buffered calcium formate solution, pH 8.5, to give calcium alginate-coated beads. The beads are left for 30-60 min in the cold calcium formate solution for polyacrylamide gel formation. The beads are then treated with a solution of glutaraldehyde and the calcium alginate subsequently leached out with a solution of potassium phosphate. Modification of the native enzyme with glutaraldehyde results in a slight enhancement in the rate of hydrolysis of benzylpenicillin at pH 7.8 and 0.05M substrate concentration. The enzyme entrapped in porous polyacrylamide gel beads shows no measurable diffusional limitation in stirred reactors, catalyzing the hydrolysis of the substrate at a rate comparable to that of the glutaraldehyde-modified native enzyme. The immobilized enzyme preparation has been used in batch mode over 90 cycles without any apparent loss in hydrolytic activity.     

Comparison of mechanical properties of normal and malignant thyroid cells

Cancer is a disease of uncontrolled cell proliferation causing approximately 13% of deaths worldwide. Cancer cell mechanics is currently an important topic of investigation in cancer diagnostics as a possible tool to distinguish malignant cells from normal cells in addition to increasing our understanding of pathophysiology of the disease. Our study, based on Atomic Force Microscopy (AFM) measurements on cells, shows that malignant thyroid cells are 3- to 5-fold softer in comparison to primary normal thyroid cells depending on duration between cell seeding and AFM experiments. These results reveal cultivation period as an important factor that influences cell mechanics and which must be considered when comparing cells. Investigation of actin cytoskeleton by fluorescent labelling revealed differences in organization of actin between malignant and normal thyroid cells, which may be directly contributing to alteration of cell mechanics in cancer cells.     

Effect of Cultural Conditions and Media Constituents on Production of Penicillin V Acylase and CTAB Treatment to Enhance Whole-Cell Enzyme Activity of <Emphasis Type="Italic">Rhodotorula aurantiaca</Emphasis> (NCIM 3425)

Penicillin V acylase (PVA) is a pharmaceutically important enzyme as it plays a vital role in the manufacture of semi-synthetic β-lactam antibiotics. Rhodotorula aurantiaca (NCIM 3425) produced high levels of intracellular penicillin V acylase after 18 h at pH 8.0 and temperature 27 °C. Fructose was the best carbon source for PVA production, whereas tryptone was the best nitrogen source to produce the enzyme up to 170 and 1,088 IU/l of culture, respectively. Additionally, the cell-bound PVA activity was enhanced on treatment with cationic detergent. Whole-cell activity was found to be doubled (204%) on treatment of 0.01 g dry weight of cells with 50 μg/ml solution of N-cetyl-N,N,N-trimethylammoniumbromide at pH 8.0 for 1 h at room temperature. Atomic force microscopy images of permeabilized cells show perturbation in the cell wall and offer first-ever visual illustration of surface structure modifications that occur during permeabilization of R. aurantiaca cells leading to enhancement in activity of intracellular enzyme.     

Pulsed Laser‐Driven Molecular Self‐assembly of Cephalexin: Aggregation‐Induced Fluorescence and Its Utility as a Mercury Ion Sensor

A fluorescent self‐assembly of cephalexin is obtained by pulsed laser irradiation process. An intense fluorescence emission is found in the self‐assembled form due to occurrence of a typical aggregation‐induced emission in cephalexin molecules. It is observed that fluorescence quenching of the self‐assembled fluorescent nanostructures occurs in the presence of extremely low Hg⁺⁺ ions concentrations (10^?7 m ) as compared to other heavy metal ions e.g. Ferrous (Fe⁺⁺), Manganese (Mn⁺⁺), Magnesium (Mg⁺⁺), Cobalt (Co⁺⁺), Nickel (Ni⁺⁺) and Zinc (Zn⁺⁺) at the same concentrations.     

Isolation,Identification and Optimization of a New Extracellular Lipase Producing Strain of <Emphasis Type="Italic">Rhizopus</Emphasis> sp.

A lipolytic mesophilic fungus which produces lipase extracellularly was isolated from soil. Based on ITS1-5.8S–ITS4 region sequences of ribosomal RNA, it was concluded that the isolate JK-1 belongs to genus Rhizopus and clades with Rhizopus oryzae. The present paper reports the screening, isolation, identification, and optimization of fermentation conditions for the production of lipase (EC 3.1.1.3). Culture conditions were optimized, and the highest lipase production was observed in basal medium with corn steep liquor as nitrogen source and glucose as carbon source. Maximum lipase production was observed at 72 h, which is about 870 U/ml. Optimization of fermentation conditions resulted in 16-fold enhancement in enzyme production.     

Ethanol production by yeast cells immobilized in open-pore agar

An open-pore agar matrix has been shown to be suitable for the entrapment of microbial whole cells required for use in reactions that involve cell growth and gas evolution. Beads of porous agar with entrapped yeast cells have been used for the continuous fermentation of sugar cane molasses to ethanol, without apparent bead rupture, even after periods of 3 mo of use. The agar gel does not erode during prolonged operation, unlike porous gelatin cross-linked with glutaraldehyde.     

Measurement of properties of silver telluride thin films using holography

Holography is an interferometric method of recording the light waves diffracted by a subject illuminated with coherent light. Holographic interferometry (H.I.) is one of the most important applications of holography. It is concerned with the formation and interpretation of fringe patterns, which appears when a wave generated at some earlier time and stored in a hologram is later reconstructed by interfering with comparison wave. We report a technique, which uses double exposure holographic interferometry together with simple mathematical interpretation, which allow immediate finding of stress and thickness of thin film. We tested the same for different normalities of solutions. It was further noticed that the fringe spacing changes with solution concentration as well as time of deposition. The thin films are prepared using electrodeposition technique. It’s structural, morphological and optical study carried out by XRD, SEM, and UV-Vis-NIR spectrophotometer.