Second harmonic generation and polar order in thin films of polyesters

A series of optically active main chain polyesters were synthesized by high temperature polycondensation from biphenolic azo chromophores with azobenzene-4,4'-dicarbonylchloride and 1,4:3,6-dianhydro-D-sorbitol ([!]_D²⁵=+42.5°). The second harmonic generation of the polyesters is studied in thin films. The polar order in films is determined from the UV-visible absorption spectra. The variation in SHG intensity with chiral monomer concentration is explained as a function of polar order. The polymers with chiral units showed good second harmonic efficiency. The intensity of second harmonic light (532 nm) increased with angle of incidence and indicated the polar order in the plane of the film. The SH signal also showed good temporal stability.     

Diastereoselective formation of 2-aryl-3-arenesulfonyl 4-ethyl-1,3-oxazolidines: An X-ray crystallographic and H NMR study

N-Arylsulfonamides of (R)- and (S)-2-amino-1-butanol, on condensation with aromatic aldehydes produced diastereomerically pure 2-aryl-3-arenesulfonyl 4-ethyl-1,3-oxazolidines. The absolute configurations of one enantiomeric pair have been determined from two fully refined X-ray structures, supplemented by nmr data.     

Second‐harmonic response of a series of chiral polyesters: A joint experimental and theoretical study

A series of polyesters with π‐conjugated donor–acceptor segments was synthesized by the condensation of azobenzene‐4,4′‐dicarbonylchloride with 1,4:3,6‐dianhydro‐D‐sorbitol ([α] = + 42.5°) and biphenolic chromophores, bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylmethane and bis(4‐hydroxyphenylazo)‐2,2′‐dinitrodiphenylsulfone. The polymers were characterized by spectral methods (IR, ultraviolet–visible, and NMR), thermal methods (thermogravimetry and differential scanning calorimetry), wide‐angle X‐ray scattering, and polarimetry. The polymers containing isosorbide units were optically active and crystalline. They exhibited glass‐transition temperature values between 100 and 160 °C and were stable up to 400 °C. The second‐harmonic generation (SHG) efficiency of the polymers was experimentally verified by a powder‐reflection technique with 2‐methyl‐4‐nitroaniline as a reference. The SHG efficiencies of the polymers were compared to those of the chromophores and explained as a function of the percentage of chiral composition. The hyperpolarizability β values were also determined by a two‐level model solvatochromic method and computational methods. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2868–2877, 2002     

Topochemical anion metathesis routes to the Zr2N2S phases and the Na2S and ACl derivatives (A = Na,K, Rb)

Anion metathesis reactions between ZrNCl and A(2)S (A = Na, K, Rb) in the solid state follow three different pathways depending on reaction temperature and reactant stoichiometry: (1) the reaction of ZrNCl with A(2)S in the 2:1 stoichiometry at 800 degrees C/72 h/in vacuo yields alpha-Zr(2)N(2)S with the expected layered structure of La(2)O(2)S. Above 850 degrees C, alpha-Zr(2)N(2)S (P3 macro m1; a = 3.605(1) A, c = 6.421(3) A) neatly transforms to beta-Zr(2)N(2)S (P6(3)/mmc: a = 3.602(1) A, c = 12.817(1) A). The structures of the alpha- and beta-forms are related by an a/2 shift of successive Zr(2)N(2) layers. (2) The same reaction at low temperatures (300-400 degrees C) yields ACl intercalated phases of the formula A(x)Zr(2)N(2)SCl(x) (0 < x < approximately 0.15), where alkali ions are inserted between the S/Cl.S/Cl van der Waals gap of a ZrNCl-type structure. The S and Cl ions are disordered and the c lattice parameters are alkali dependent (R3 macro m, a approximately 3.6 A, c approximately 28.4 (Na), 28.9 (K), and 30.5 A (Rb). A(x)Zr(2)N(2)SCl(x) phases are hygroscopic and reversibly absorb water to give monohydrates. (3) Reaction of ZrNCl with excess A(2)S at 400-1000 degrees C gives A(2)S intercalated phases of the formula A(2)(x)Zr(2)N(2)S(1+)(x) (0 < x < 0.5), where the alkali ions reside between the S.S van der Waals gap of a ZrNCl type structure (R3 macro m, a approximately 3.64 A, c approximately 29.48 A). Structural characterization of the new phases and implications of the results are described.     

Dispersed fluorescence spectroscopy of primary and secondary alkoxy radicals

Dispersed fluorescence (DF) spectra of 1-propoxy, 1-butoxy, 2-propoxy, and 2-butoxy radicals have been observed under supersonic jet cooling conditions by pumping different vibronic bands of the B-X laser induced fluorescence excitation spectrum. The DF spectra were recorded for both conformers of 1-propoxy, three conformers of the possible five of 1-butoxy, the one possible conformer of 2-propoxy, and two conformers of the possible three of 2-butoxy. Analysis of the spectra yields the energy separations of the vibrationless levels of the ground X and low-lying A electronic state as well as their vibrational frequencies. In all cases, the vibrational structure of the DF spectra is dominated by a CO stretch progression yielding the nuCO stretching frequency for the X state and in most cases for the A state. In addition to the experimental work, quantum chemical calculations were carried out to aid the assignment of the vibrational levels of the X state and for some conformers the A state as well. Geometry optimizations of the different conformers of the isomers were performed and their energy differences in the ground states were determined. The results of the calculation of the energy separations of the close-lying X and A states of the different conformations are provided for comparison with the experimental observations.     

Subsecond luminescence intensity fluctuations of single CdSe quantum dots

Photoluminescence (PL) intermittency characteristics are examined for single quantum dots (QDs) in a CdSe QD sample synthesized at a slow rate at 75 degrees C. Although the PL quantum efficiency was relatively low ( approximately 0.25), we noticed that the PL intensity of single CdSe QDs fluctuated on a subsecond time scale with short-lived "on" and "off" states. The subsecond PL intensity fluctuations of CdSe QDs are different from "on" and "off" PL blinking generally observed for QDs fluctuating on a millisecond to minute time scale. We characterized single QDs by identifying polarized excitations, topographic imaging using atomic force microscopy (AFM), and transmission electron microscopy (TEM). From analysis of the PL intensity trajectories from >100 single CdSe QDs, the average intermittency time was 213 ms. From the PL quantum efficiency, slow growth of QDs, intensity trajectory analyses, and previous reports relating surface trap states and PL properties of QDs, we attribute the subsecond PL intensity fluctuations of single CdSe QDs and short-lived "on" and "off" states to a high-density distribution of homogeneous surface trap states.     

Synthesis,characterization and electrochemical studies of ruthenium(III) heterocyclic Schiff bases

A series of hexacoordinated Ru^III–PPh₃ complexes of general formula [RuCl(PPh₃)L] (L = tetradentate Schiff bases derived from the condensation of 2-furaldehyde or thiophene-2-carboxyaldehyde with alkyl and aryl diamines have been synthesized. The complexes were characterized by elemental analyses, spectroscopic and cyclic voltammetric studies. All of the complexes were paramagnetic. Coordination of the Schiff base appears to occur through the two nitrogen and two heterocyclic oxygen/sulphur atoms.     

Mixed valency in the high-temperature phases of transition metal molybdates, A MoO4 ( A =Fe, Co, Ni)

Transition metal molybdates of the formulaAMoO₄ whereA=Fe, Co or Ni exhibit a first-order phase transition between 670K–970K. An investigation of the lowtemperature (lt) and high-temperature (ht) phases by x-ray photoelectron spectroscopy, x-ray absorption spectroscopy, magnetic susceptibility and other physical methods shows that the phase transition is associated with a valence change of the typeA ²⁺+Mo⁶⁺αA ³⁺+Mo⁵⁺ in the cases of iron and cobalt molybdates. Contribution No. 311 from the Solid State and Structural Chemistry Unit.