A non-ideal portal frame energy harvester controlled using a pendulum

A model of energy harvester based on a simple portal frame structure is presented. The system is considered to be non-ideal system (NIS) due to interaction with the energy source, a DC motor with limited power supply and the system structure. The nonlinearities present in the piezoelectric material are considered in the piezoelectric coupling mathematical model. The system is a bi-stable Duffing oscillator presenting a chaotic behavior. Analyzing the average power variation, and bifurcation diagrams, the value of the control variable that optimizes power or average value that stabilizes the chaotic system in the periodic orbit is determined. The control sensitivity is determined to parametric errors in the damping and stiffness parameters of the portal frame. The proposed passive control technique uses a simple pendulum to tuned to the vibration of the structure to improve the energy harvesting. The results show that with the implementation of the control strategy it is possible to eliminate the need for active or semi active control, usually more complex. The control also provides a way to regulate the energy captured to a desired operating frequency.     

Structural complexity of disordered surfaces: Analyzing the porous silicon SFM patterns

This paper introduces a relative structural complexity measure for the characterization of disordered surfaces. Numerical solutions of 2d+1 KPZ equation and scanning force microscopy (SFM) patterns of porous silicon samples are analyzed using this methodology. The results and phenomenological interpretation indicate that the proposed measure is efficient for quantitatively characterize the structural complexity of disordered surfaces (and interfaces) observed and/or simulated in nano, micro and ordinary scales.     

Quantitation of glucosamine sulfate in plasma by HPLC-MS/MS after administration of powder for oral solution formulation

A rapid method for the quantification of glucosamine in human plasma using high‐performance liquid chromatography coupled to tandem mass spectrometry was developed and validated. The sample preparation includes a simple deproteinization step, using d ‐[1‐¹³C] glucosamine hydrochloride as an internal standard. Chromatographic separation was performed on an ACE Ciano column using isocratic elution with acetonitrile and aqueous 2 mm ammonium acetate containing 0.025% formic acid (80:20). Selected reaction monitoring was performed using the transitions m/z 180.1 → m/z 72.1 and m/z 181.0 → m/z 74.6 to quantify glucosamine and internal standard, respectively. The method was validated and proved to be linear, accurate and precise over the range 50–5000 ng/mL of glucosamine. Recovery rates higher than 90% were obtained for both glucosamine and internal standard. No matrix effect was detected in the samples. The validated method was successfully applied to a pharmacokinetic study after oral administration of a powder for oral solution formulation containing glucosamine sulfate. Copyright © 2011 John Wiley & Sons, Ltd.     

NO Release from trans-[Ru(NH3)4L(NO)]3+ Complexes Upon Reduction (L = 1-Methylimidazole or Benzoimidazole)

The synthesis, characterization and reactivity of trans-[Ru(NH₃)₄(L)NO](PF₆)₃(L = benzoimidazole or 1-methylimidazole in trans position to NO) are presented. ¹H-n.m.r. spectroscopy data indicate that the benzoimidazole and 1-methylimidazole ligands are coordinated to Ru^II through carbon and nitrogen, respectively. The nitrosyl stretching frequencies [(NO) > 1900 cm^–1] suggest that the coordinated nitrosyl has substantial NO⁺ character. The complexes undergo a single-electron reduction (E ⁰–0.245 versus NHE), which involves the coordinated nitrosyl. Dissociation of NO in the reduced species is facilitated by the 1-methylimidazole ligand, which is not observed for the benzoimidazole species. The complex with 1-methylimidazole does not suffer hydroxide attack on the NO⁺, at least at pH values lower than 11.     

Screening of volatile composition from Portuguese multifloral honeys using headspace solid-phase microextraction-gas chromatography-quadrupole mass spectrometry

The volatile composition from four types of multifloral Portuguese (produced in Madeira Island) honeys was investigated by a suitable analytical procedure based on dynamic headspace solid-phase microextraction (HS-SPME) followed by thermal desorption gas chromatography-quadrupole mass spectrometry detection (GC-qMS). The performance of five commercially available SPME fibres: 100 μm polydimethylsiloxane, PDMS; 85 μm polyacrylate, PA; 50/30 μm divinylbenzene/carboxen on polydimethylsiloxane, DVB/CAR/PDMS (StableFlex); 75 μm carboxen/polydimethylsiloxane, CAR/PDMS, and 65 μm carbowax/divinylbenzene, CW/DVB; were evaluated and compared. The highest amounts of extract, in terms of the maximum signal obtained for the total volatile composition, were obtained with a DVB/CAR/PDMS coating fibre at 60 °C during an extraction time of 40 min with a constant stirring at 750 rpm, after saturating the sample with NaCl (30%). Using this methodology more than one hundred volatile compounds, belonging to different biosynthetic pathways were identified, including monoterpenols, C₁₃-norisoprenoids, sesquiterpenes, higher alcohols, ethyl esters and fatty acids. The main components of the HS-SPME samples of honey were in average ethanol, hotrienol, benzeneacetaldehyde, furfural, trans-linalool oxide and 1,3-dihydroxy-2-propanone.     

A method for calibration and validation subset partitioning

This paper proposes a new method to divide a pool of samples into calibration and validation subsets for multivariate modelling. The proposed method is of value for analytical applications involving complex matrices, in which the composition variability of real samples cannot be easily reproduced by optimized experimental designs. A stepwise procedure is employed to select samples according to their differences in both x (instrumental responses) and y (predicted parameter) spaces. The proposed technique is illustrated in a case study involving the prediction of three quality parameters (specific mass and distillation temperatures at which 10 and 90% of the sample has evaporated) of diesel by NIR spectrometry and PLS modelling. For comparison, PLS models are also constructed by full cross-validation, as well as by using the Kennard-Stone and random sampling methods for calibration and validation subset partitioning. The obtained models are compared in terms of prediction performance by employing an independent set of samples not used for calibration or validation. The results of F-tests at 95% confidence level reveal that the proposed technique may be an advantageous alternative to the other three strategies.     

Finite-element method simulation of rotating disk flow: effect of the transport of a chemical species

Electrochemical cells containing an iron rotating disk electrode which is dissolved in the electrolyte, an 1 M H₂SO₄ solution present a current instability in the plateau region, where the current is controlled by the mass transport. Dissolution of the electrode gives rise to a thin concentration boundary layer, due to a Schmidt number Sc = 2000. This boundary layer, together with the potential applied to the electrode, leads to an increase in the fluid viscosity and in a decrease in the diffusion coefficient, coupling the concentration and the chemical species field. Since the current is proportional to the concentration gradient at the interface, an instability of the coupled fields at Reynolds numbers attained in experimental conditions could be responsible for the current instability. Mangiavacchi [1] performed a linear stability analysis of the problem and showed that this is indeed the case. In this paper we review the main results of the stability analysis and present the main features of the FEM code recently developed in our group, to proceed with the investigation of the current instability observed in electrochemical cells. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effects of strontium and calcium simultaneous substitution on electrical and structural properties of Pb1?x?yCaxSryTiO3 thin films

Ferroelectric Pb_1−x−y Ca _x Sr _y TiO₃ thin films (denoted by PCST90, PCST70, and PCST30) were deposited on the Pt/Ti/SiO₂/Si substrates by a chemical solution deposition method. Their properties were investigated from the viewpoint of crystal structure, microstructure, dielectric, and ferroelectric properties. X-ray diffraction patterns revealed the formation of PCST90, PCST70, and PCST30 thin films without any secondary phases. Infrared and Raman spectroscopy results show that a gradual phase transition from tetragonal to pseudocubic or cubic perovskite structure may occur in PCST thin films with the simultaneous increase of Ca²⁺ and Sr²⁺ contents. Both substitution of isovalent Ca²⁺ and Sr²⁺ at Pb²⁺-site enhanced the dielectric constant and reduced the remnant polarization. In addition, ferroelectric test analyses show that the PCST thin films undergo a ferroelectric-to-paraelectric phase transformation with an amount of Pb²⁺, Ca²⁺, and Sr²⁺ at 30%, 35%, and 35% mol, respectively. Hence, the absence of ferroelectric property may be attributed to a decreasing of the octahedron distortion in the perovskite structure accompanied by a weakening of long-range ferroelectric order.