Evidence for a trigonal twist mechanism involving a phosphite ligand of Os3(CO)7,[P(OMe)3]5

The fluxional molecule Os₃(CO)₇[P(OMe)₃]₅ has been prepared from OS₃(CO)₁₂ and P(OMe)₃ by a combination of thermal and UV irradiation synthetic methods. An investigation by ³¹P and ¹³C NMR spectroscopy indicated that the mechanism of fluxionality in this compound probably involves the P(OMe)₃ ligand of the Os(CO)₃[P(OMe)₃] unit moving from one equatorial site to the other via a trigonal twist mechanism.     

Preparation of some complexes of the type (C6H5)3P[(CH3)2AsCH2CH(R)CH2As(CH3)2] M(CO)3 (M = Mo or W,R = H or C(CH3)3)

The title compounds, which contain six-membered chelate rings locked in the chair conformation, have been prepared by the reaction of (C₆H₅)₃P with the appropriate tetracarbonyl derivative in refluxing mesitylene.     

Analysis of microgram amounts of particulate material by simultaneous multiwavelength AES

A unique simultaneous emission spectrograph is utilized to perform qualitative and quantitative analysis on trace quantities of solid particulates. The atomic emission spectroscopic system consists of a direct current plasma source and an echelle spectrograph with a charge injection device detector, enabling the system to simultaneously measure the wavelength range from 220 nm to 520 nm with 0.02 nm resolution at 300 nm. Monitoring all wavelengths simultaneously allows the qualitative and quantitative determination of most major and minor constituent in a trace quantity of sample with little prior knowledge about the sample. The ability to perform qualitative and quantitative analysis on particulates is demonstrated by evaluating NBS certified coal fly ash, as well as a sample taken from the respirator air filter at an acute care unit in a hospital.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Isolation and characterization of nongeminal cyclic methylphenylphosphazene tetramers

Heating pure samples of the cyclic phosphazenes, cis- or trans-[Me(Ph)PN](3), yielded mixtures of the cis and trans isomers of the cyclic phosphazene trimers, [Me(Ph)PN](3), and all four geometric isomers of the tetramers, [Me(Ph)PN](4). Varying the temperature and heating times changes the ratio of these components. Following the thermolysis by NMR spectroscopy indicated that only a mixture of the two isomeric trimers occurred initially. Longer heating times produced mixtures of the isomers of the tetramer. Column chromatography and solubility differences were used to separate each of the isomers of the tetramer. Spectroscopic and X-ray crystallographic studies suggest that the four different geometrical isomers of the tetramer can be described as cone, partial cone, 1,2-alternate, and 1,3-alternate by analogy to calix[4]arene.     

Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Flowerlike hybrid horseradish peroxidase nanobiocatalyst for the polymerization of guaiacol

In this study, the catalytic activity and stability of flowerlike hybrid horseradish peroxidase (HRP) nanobiocatalyst (HRP-Cu ²⁺ ) obtained from Cu ²⁺ ions and HRP enzyme in the polymerization reaction of guaiacol were analyzed. We demonstrated that HRP-Cu ²⁺ and hydrogen peroxide (H ₂ O ₂ ) initiator showed significantly increased catalytic activity and stability on the polymerization of guaiacol compared to that of free HRP enzyme. Poly(guaiacol) was observed with quite high yields (88%) and molecular weights (38,000 g/mol) under pH 7.4 phosphate-buffered saline (PBS) conditions at 60 °C with 5 weight% of HRP-Cu ²⁺ loading. HRP-Cu ²⁺ also shows very high thermal stability and works even at 70 °C reaction temperature; free HRP enzyme denatures at that temperature. Furthermore, HRP-Cu ²⁺ provided considerable repeated use and showed some degree of catalytic activity, even after the fourth recycle, in the polymerization of guaiacol.     

Chemical composition,antimicrobial, and lipase enzyme activity of essential oil and solvent extracts from Serapias orientalis subsp. orientalis

The volatile components of essential oil (EO), SPME, and SPME of solvent extracts ( n -hexane, methanol, and water) obtained from fresh Serapias orientalis subsp. orientalis ( Soo ) were analyzed by GC-FID/MS. EO of Soo gave 11 compounds in the percentage of 99.97%; capronaldehyde (37.01%), 2-( E )-hexenal (23.19%), and n -nonanal (19.05%) were found to be major constituents. SPME GC-FID/MS analyses of fresh plant and solvent extracts of Soo revealed 7, 12, 7, and 4 compounds within the range of 99.7% to 99.9%. Limonene (76.5%, 41.7%, and 61.3%) was the major compound in SPMEs of the n -hexane and methanol extracts. α -Methoxy- p -cresol (52.9%) was the main component in its water extract. The antimicrobial activity of EO and the solvent extracts of Soo were screened against 9microorganisms. EO showed the best activity against Mycobacterium smegmatis , with 79.5 µg/mL MIC value. The n -hexane, methanol, and water extracts were the most active against the Staphylococcus aureus within the range of 81.25–125.0 µg/mL (MIC). IC ₅₀ values for the lipase enzyme inhibitory activity of EO and solvent extracts ( n -hexane, methanol, and water) were determined to be 59.87 µg/mL, 64.03 µg/mL, 101.91 µg/mL, and 121.24 µg/mL, respectively.     

Development of an HPLC method for determination of pentachloronitrobenzene, hexachlorobenzene and their possible metabolites

Background

Pentachloronitrobenzene (PCNB) and hexachlorobenzene (HCB) are highly toxic and widespread in every environmental compartment. Some of metabolic products such as amino/nitro containing chlorinated aromatic compounds can be determined by gas chromatography coupled with electron capture detector (GC-ECD). However, it is difficult to identify some of chlorophenolic and chloroquinolic intermediates produced from PCNB and HCB by the above mentioned technique. Therefore, for analysis of these compounds and their metabolites, we have developed a high performance liquid chromatography (HPLC) based method.

Results

The extraction of PCNB and HCB from soil and minimal salt medium was carried out with ethyl acetate and hexane respectively with good recoveries (98% for PCNB and 97% for HCB). The validation of the proposed extraction and HPLC method was done by analysis of PCNB and HCB biodegradation and their metabolites identification from anaerobic enriched soil samples.

Conclusion

A rapid, sensitive and simple HPLC based analytical method was developed for the analysis of PCNB, HCB and their possible intermediates.     

Decay rates of solutions to thermoviscoelastic plates with memory

We consider the thermoelastic plate under the presence of along range memory. We find uniform rates of decay (in time)of the energy, provided that suitable assumptions on the relaxationfunctions are given. Namely, if the relaxation decays exponentiallythen the first order energy also decays exponentially. Whenthe relaxation g satisfies -c₁g(t)^1+1/_p g'(t) -c_og(t)^1+1/_p; and g,g^1-1/_p L¹ (R) withp > 2 then the energy decays as 1/(1+t)^p. A new Liapunov functionalis built for this problem.     

Synthesis and structure of two tetranuclear osmium carbonyl isotopomers: a crystallographic isotope effect

A synthetic route to [Os4(mu-H)(mu-OH)(mu-CO)(CO)12] ( 1) has been devised through the activation of [Os4(CO)14] with Me3NO. The pyrolysis and photolysis of the reactant in the presence of a trace amount of water produces 1 in low yield. The solid-state structure of [Os4(mu-H)(mu-OH)(mu-CO)(CO)12 x H2O] (1 x H2O) reveals a butterfly Os4 skeleton with bridging H, OH and CO ligands as well as hydrogen-bonded molecules of water in the crystal lattice. A low-temperature 13C{1H} NMR spectroscopic study revealed a merry-go-round exchange of CO ligands around the Os3 plane containing the asymmetric bridging CO. The exposure of 1 x H2O to D2O yielded [Os4(mu-H)(mu-OD)(mu-CO)(CO)12]2. Although the solid-state, intramolecular structure of 2 closely matched that of 1 x H2O, the intermolecular structure did not: its crystal lattice contained no water of crystallization, a previously unreported crystallographic isotope effect.