A New Cells‐Compatible Microfluidic Device for Single Channel Recordings

We report the fabrication of a microfluidic apparatus and the realization of a sensors based on PEDOT : PSS, a biocompatible semiconductor polymer used in substitution of standard electrodes for electrophysiological studies and for detection of nanopores in membrane. This gives the possibility to study the mechanisms of ions balance and molecular transport though cell membranes. In particular the apparatus is based on two chambers connected through an aperture in a PTFE sheet where lipid bilayer are formed using Montal‐Mueller method, and the pore‐forming proteins activity is detected by polymeric electrodes. This methodology could be applied to examine different membrane proteins for the purpose of biosensing, drug screening and nanopore technologies.     

Carbonaceous phases by IR laser-induced decomposition of 3-butyn-2-one

2 laser radiation in the gas phase results in the deposition of carbonaceous films composed of a graphitic and monohydrogenated carbon, in which H is dominantly bonded to sp³ sites. The films incorporate oxygen in the topmost layers. The technique is suitable for the preparation of thin C-based films at low substrate temperatures. Received: 23 July 1997/Accepted: 18 November 1997     

Anwendung von29Si-KMR zur Analyse der silylierten Verbindungen. KMR-Spektren von (CH3)3Si-O-C-Derivaten

Ohne Zusammenfassung     

Effects of electron-beam irradiation on surface oxidation of polymer composites

The aim of this article was to show the effects of an electron radiation dose and presence of a compatibilizer on the oxidation of composites made of blends of low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), polystyrene (PS), and poly(ethylene terephthalate) (PET) as well as of blends of LDPE, HDPE, and PP. As the compatibilizers, the styrene-ethylene/butylene-styrene elastomer grafted with maleic anhydride (SEBS-g-MA) and trimethylol propane trimethylacrylate (TMPTA) were used; they were added in the amounts of 5, 10, and 15 wt% and 1, 2, and 3 wt%, respectively. The oxidation of the surface layer (SL) was investigated by the X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). It was found that the extent of the composite oxidation increased with the increasing dose of the electron radiation. The addition of the compatibilizers enhanced the oxidation of the SL but hindered the oxidation of the bulk of the material.     

Synthesis and applications of cyano‐vinylene‐based polymers containing cyclopentadithiophene and dithienosilole units for photovoltaic cells

Two β‐cyano‐thiophenevinylene‐based polymers containing cyclopentadithiophene ( CPDT‐CN ) and dithienosilole ( DTS‐CN ) units were synthesized via Stille coupling reaction with Pd(PPh₃)₄ as a catalyst. The effects of the bridged atoms (C and Si) and cyano‐vinylene groups on their thermal, optical, electrochemical, charge transporting, and photovoltaic properties were investigated. Both polymers possessed the highest occupied molecular orbital (HOMO) levels of about ?5.30 eV and the lowest unoccupied molecular orbital (LUMO) levels of about ?3.60 eV, and covered broad absorption ranges with narrow optical band gaps (ca. 1.6 eV). The bulk heterojunction polymer solar cell (PSC) devices containing an active layer of electron‐donor polymers ( CPDT‐CN and DTS‐CN ) blended with an electron‐acceptor, that is, [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM), in different weight ratios were explored under 100 mW/cm² of AM 1.5 white‐light illumination. The PSC device based on DTS‐CN: PC₇₁BM (1:2 w/w) exhibited a best power conversion efficiency (PCE) value of 2.25% with V_oc = 0.74 V, J_sc = 8.39 mA/cm², and FF = 0.36. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Atmospheric pressure chemical vapour deposition of selenium and tellurium films by UV laser photolysis of diethyl selenium and diethyl tellurium

Excimer laser‐induced photolysis of gaseous diethyl selenium and diethyl tellurium (C₂H₅)₂M (M = Se, Te) is controlled by cleavage of both M? C bonds, it yields C₁–C₄ hydrocarbons (ethene as major product) and results in chemical vapour deposition of selenium films and nanosized tellurium powder. The selenium and tellurium properties were characterized by X‐ray photoelectron spectroscopy and Scanning electron Microscopy techniques. Copyright © 2001 John Wiley & Sons, Ltd.     

UV laser deposition of nanostructured Si/C/O/N/H from disilazane precursors and evolution to silicon oxycarbonitride

Megawatt ArF laser photolysis of gaseous methyldisilazanes [(CH₃)_nH_3?nSi]₂NH (n = 2, 3) in excess of Ar yields hydrocarbons (major volatile products), methylsilanes (minor volatile products) and allows chemical vapour deposition of solid amorphous Si/C/O/N/H powder containing Si? X (X? C, H, O, N) bonds. The incorporation of O is due to a high reactivity of the primarily formed products towards air moisture. The resulting solid materials possess nanometer‐sized texture and high specific area, contain Si‐centered radicals and anneal under argon to silicon oxycarbonitride, whose structure is described as a network of O‐ and N‐interconnected Si and C atoms. Copyright © 2006 John Wiley & Sons, Ltd.     

Infrared laser-produced carbon-phase shield to oxidation of nanosized titanium monoxide

Pulsed infrared laser-irradiation of titanium monoxide leads to ablation and when carried out in gaseous benzene (1-5 Torr) to simultaneous dielectric breakdown of benzene into low molecular carbonaceous species which allow carbothermal reduction of ablated TiO_x particles and their protection by carbonaceous shell. The deposited particles are characterized by Fourier transform infrared Raman and X-ray photoelectron spectroscopy and by electron microscopy and shown to be stable towards oxidation in air. The reported process can find use in protection of gas-phase produced reactive nanoparticles by carbon phase.     

Novel tricarbonyl rhenium complexes of 5,8-quinolinedione derivatives - Synthesis, spectroscopic characterisation, X-ray structure and DFT calculations

The molecular structure of 7-acetamido-2-methyl-quinoline-5,8-dione has been determined and the reactivity of 7-acetamido-2-methyl-quinoline-5,8-dione (1) and 6-acetamido-2-methyl-quinoline-5,8-dione (2) towards Re(CO)₅Cl has been examined. Two novel tricarbonyl rhenium complexes, fac-[Re(CO)₃(7-acetamido-2-methyl-quinoline-5,8-dione)Cl]·CHCl₃ (3·CHCl₃) and fac-[Re(CO)₃(6-acetamido-2-methyl-quinoline-5,8-dione)Cl]₂·CHCl₃ (4·CHCl₃), have been synthesized and characterized spectroscopically and structurally. The electronic spectrum of 3 was investigated at the TDDFT level employing B3LYP functional in combination with LANL2DZ.