Substituent effects on the rate constants for the photo-Claisen rearrangement of allyl aryl ethers

The photochemistry of 11 substituted allyl 4-X- and 3-X-aryl ethers 3 (ArOCH2-CH=CH2) has been examined in both methanol and cyclohexane as solvents. The ethers react by the photo-Claisen rearrangement to give allyl substituted phenols as the major primary photoproducts, as expected from the well-established radical pair mechanism. The excited singlet state properties (absorption spectra, fluorescence spectra, fluorescence quantum yields, and singlet lifetimes) were compared with a parallel set of unreactive 4-X- and 3-X-anisoles 4. The excited-state properties of three substituted 4-X-aryl 4-(1-butenyl) ethers 14 (ArOCH2CH2-CH=CH2) were also examined. The model compounds 4 and the reactive allyl ethers 3 have essentially identical rate constants for the excited-state processes with the exception of, the rate constant for homolytic cleavage from S(1) of the allyl ethers to give the radical pair. The difference between the fluorescence quantum yields and/or singlet lifetimes for 3 and 4 were used to obtain values of for all of the allyl ethers. These values exhibit a large substituent effect, spanning almost 2 orders of magnitude with electron-donating groups (CH3O, CH3) accelerating the reaction and electron-withdrawing ones (CN, CF3) slowing it down. The parallel range of rate constants observed in both methanol and cyclohexane indicates that ion pairs are not important intermediates in these rearrangements. Quantum yields of reaction (Phi(r)) for several of the more reactive ethers demonstrate that neither these values nor rate constants of reaction derived from them are reliable measures of the actual excited-state process. In fact, the values are significantly lower than the ones, indicating that the radical pairs undergo recombination to generate starting material. Finally, the rate constants were found to parallel a trend for the change in bond dissociation energy (deltaBDE) for the O-C (allyl) bond of the allyl ethers, indicating that other possible substituent effects are of minor importance.     

On-Line Monitoring of the Photolysis of Benzyl Acetate and 3,5-Dimethoxybenzyl Acetate by Membrane Introduction Mass Spectrometry

Membrane introduction mass spectrometry (MIMS) allows on-line monitoring of the products of photolysis (254 nm) of benzyl acetate in aqueous methanol and 3,5-dimethoxybenzyl acetate in water. The reaction mixture is continuously exposed to a silicone membrane through which analyte molecules permeate into a triple quadrupole mass spectrometer for qualitative and quantitative analysis. Ionization is achieved by either isobutane or ammonia chemical ionization, and ions characteristic of the reactant ester and its products are monitored simultaneously and continuously. Three products, benzyl methyl ether, ethylbenzene, and bibenzyl are observed in the benzyl acetate photolysis. Two products, 3,5-dimethoxybenzyl alcohol and 3,5-dimethoxyethylbenzene, are formed in the photolysis of 3,5-dimethoxybenzyl acetate. Quantitation is achieved through calibration using external standard solutions and, in the case of benzyl methyl ether, tandem mass spectrometry is used to verify product identification. During the photolysis of benzyl acetate, benzyl methyl ether and ethylbenzene are produced at onset with similar efficiencies. For the 3,5-dimethoxy ester photolysis, performed in aqueous solution, the efficiency of formation of the polar product 3,5-dimethoxybenzyl alcohol is about 300 times greater than that of the nonpolar product 3,5-dimethoxyethylbenzene. The results show that the relative reaction rates are dependent on the solvent and on the photon intensity and are consistent with earlier off-line experiments by Pincock et al. which showed that the photolysis proceeds through both ion and radical pair intermediates. To the best of our knowledge, the work reported here describes the first analysis of the photochemistry of an aralkyl ester in water and the first use of on-line mass spectrometry in a mechanistic study.     

On the Rayleigh-Plateau instability

In this paper,we study the surface instability of a cylindrical pore in the absence of stress. This instability is called the Rayleigh-Plateau instabilty. We consider the model developed by Spencer et ...     

Synthesis,Antibacterial, and Antioxidant Evaluation of Novel Series of Condensed Thiazoloquinazoline with Pyrido,Pyrano, and Benzol Moieties as Five- and Six-Membered Heterocycle Derivatives

A novel synthesis of thiazolo[2,3-b]quinazolines 4(a–e), pyrido[2′,3′:4,5]thiazolo[2,3-b]quinazolines {5(a–e), 6(a–e), and 7(a–e)}, pyrano[2′,3′:4,5]thiazolo[2,3-b]quinazolines 8(a–e), and benzo[4,5]thiazolo[2,3-b]quinazoloine9(a–e) derivatives starting from 2-(Bis-methylsulfanyl-methylene)-5,5-dimethyl-cyclohexane-1,3-dione 2 as efficient α,α dioxoketen dithioacetal is reported and the synthetic approaches of these types of compounds will provide an innovative molecular framework to the designing of new active heterocyclic compounds. In our study, we also present optimization of the synthetic method along with a biological evaluation of these newly synthesized compounds as antioxidants and antibacterial agents against the bacterial strains, like S. aureus, E. coli, and P. aeruginosa. Among all the evaluated compounds, it was found that some showed significant antioxidant activity at 10 μg/mL while the others exhibited better antibacterial activity at 100 μg/mL. The results of this study showed that compound 6(c) possessed remarkable antibacterial activity, whereas compound 9(c) exhibited the highest efficacy as an antioxidant. The structures of the new synthetic compounds were elucidated by elemental analysis, IR, ¹H-NMR, and ¹³C-NMR.     

Novel microscopic mechanism of intermixing during growth on soft metallic substrates

Generic computer simulations using empiric interatomic potentials suggest a new, collective mechanism that could be responsible for mixing at heteroepitaxial interfaces. Even if single adsorbate atoms diffuse by hopping on the substrate surface and do not mix at the terraces, two-dimensional islands formed by nucleation may become unstable above a certain critical size and explode upwards forming clusters of several atomic layers. This process is accompanied by strong distortions of the underlying atomic layers, and on soft materials it can result in surface etching and incorporation of substrate atoms into the islands.     

Examination of Template Structural Effects on CEC Chiral Separation Performance of Molecule Imprinted Polymers Made by a Generalized Preparation Protocol

Some acidic chiral templates were used to prepare open tubular (OT) molecule imprinted polymer (MIP) capillary columns to explore the effects of molecular structures of templates on chiral recognition capabilities and to verify the feasibility of the general MIP preparation protocol introduced in the previous study. The templates are phenyl carboxylic acids and their derivatives. Optimization was carried out for chiral separation of template enantiomers for each MIP column through varying pH and composition of eluent. It was found that the preparation protocol can be successfully applied for the appropriate templates with functional groups fulfilling the three-points interaction rule. The chiral separation performances were quite satisfactory for MIPs of such templates although they are yet inferior to the separation performances of the MIP columns fabricated with the templates of profen drugs (2-arylpropionic acids with a large substituent on the phenyl ring). Subtle variations of the template molecular structures have been found to be critical to enhance chiral recognition ability of the resultant MIP column.     

An Identification Problem for First-Order Degenerate Differential Equations

We study a first-order identification problem in a Banach space. We discuss the nondegenerate and mainly the degenerate case. As a first step, suitable hypotheses on the involved closed linear operators are made in order to obtain unique solvability after reduction to a nondegenerate case; the general case is then handled with the help of new results on convolutions. Some applications to partial differential equations motivate this abstract approach.Communicated by I. GalliganiWork partially supported by MIUR (Ministero dell’ Istruzione, dell’ Università e dalla Ricerca), Project PRIN 2004011204 “Analisi Matematica nei Problemi Inversi,” and by the University of Bologna Funds for Selected Research Topics.     

Cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction and HPLC–DAD analysis of ezetimibe and simvastatin in human plasma and urine

A new cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction (CA–HF–SLPME) followed by high‐performance liquid chromatography–diode array detection (HPLC–DAD) method was developed for simultaneous determination of ezetimibe and simvastatin in human plasma and urine samples. To prepare the CA–HF–SLPME device, the cetyl‐alcohol was immobilized into the pores of a 2.5 cm hollow fiber micro‐tube and the lumen of the micro‐tube was filled with 1‐octanol with the two ends sealed. Afterwards, the prepared device was introduced into 10 mL of the sample solution containing the analytes with agitation. Under optimized conditions, calibration curves plotted in spiked plasma and urine samples were linear in the ranges of 0.363–25/0.49–25 μg L^?1 for ezetimibe/simvastatin and 0.193–25/0.312–25 μg L^?1 for ezetimibe/simvastatin in plasma and urine samples, respectively. The limit of detection was 0.109/0.174 μg L^?1 for ezetimibe/simvastatin in plasma and 0.058/0.093 μg L^?1 for ezetimibe/simvastatin in urine. As a potential application, the proposed method was applied to determine the concentration of selected analytes in patient plasma and urine samples after medication and satisfactory results were achieved. In comparison with reference methods, the CA–HF–SLPME–HPLC–DAD method demonstrates considerable potential in the biopharmaceutical analysis of selected drugs.