CHARACTERIZATIONS OF JORDAN (?)-SKEW MULTIPLICATIVE MAPS ON OPERATOR ALGEBRAS OF INDEFINITE INNER PRODUCT SPACES

Let H and K be indefinite inner product spaces. This paper shows that a bijective map φ:B(H)→B(K) satisfies φ(AB B A) =φ(A)φ(5) φ(B) φ(A) for every pair A,B ∈B(H) if and only if either φ(A) = cU AU for all A or φ(A) = cUA U for all A; φsatisfies φ(AB A) = φ(A)φ(B) φ(A) for every pair A,B ∈B(H) if and only if either φ(A) = UAV for all A or φ(A) = UA V for all A, where A denotes the indefinite conjugate of A, U and V are bounded invertible linear or conjugate linear operators with U U = c-1I and V V = cI for some nonzero real number c.     

New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Effects of Substrate Temperature on Helium Content and Microstructure of Nanocrystalline Titanium Films

Helium-charged nanocrystalline titanium films have been deposited by HeAr magnetron co-sputtering. The effects of substrate temperature on the helium content and microstructure of the nanocrystalline titanium films have been studied. The results indicate that helium atoms with a high concentration are evenly incorporated in the deposited titanium films. When the substrate temperature increases from 60℃ to 350℃ while the other deposition＇parameters are fixed, the helium content decreases gradually from 38.6 at.% to 9.2at.%, which proves that nanocrystalline Ti films have a great helium storage capacity. The 20 angle of the Bragg peak of （002） crystal planes of the He-charged Ti film shifts to a lower angle and that of （100） crystal plane is unchanged as compared with that of the pure Ti film, which indicates that the lattice parameter c increases and a keeps at the primitive value. The grain refining and helium damage result in the diffraction peak broadening.     

关于算子方程AX=XAX与AX=XA=XAX

用A的不变子空间作参数，给出了算子方程AX＝XAX的全部解。当A是单射或稠值域时，或者当A是正规算子时，给出了算子方程AX＝XA＝XAX的全部解。我们还给出正规算子X是算子方程AX＝XZ＝XAX的解的充分必要条件。     

高压沿面放电烟气脱硫技术动态实验研究

本文针对高压沿面放电活化气体的烟气脱硫技术,在静态实验研究的基础上进行了实验室冷态动态的实验研究。设计了便于反应和测量的动态实验装置。实验解释了电子束法脱硫技术中导致氨气泄漏的部分原因,验证了高压沿面放电脱硫技术可以在较低的运行电压下,达到提高脱硫效率,减少氨气泄漏的作用。     

静压下半导体微腔内激子与光子行为的研究

由于腔模与激子对压力的依赖关系不同,所以可以选择不同的压力使激子和光场处于不同的耦合状态,从而实现对耦合的调谐。利用这种办法,我们观测到了代表激子与光场强耦合作用的Rabi分裂。由于在我们现有样品结构中压力对激子本征行为的影响很小,与以前报道的温度、电场等调谐方式相比,这种调谐方法不仅可以有效地调谐半导体微腔内激子与腔模的耦合程度,而且能够保持激子的本征性质在整个调谐过程中基本不变。这有助于研究在强耦合过程中激子极化激元的本征性质。将实验结果与压力下激子与腔模耦合理论进行拟合,得出了正确的Rabi分裂值。     

激光沉积超导薄膜过程中出射粒子速度的飞行时间谱分析

采用飞行时间谱技术,测量了准分子激光烧蚀沉积高温超导薄膜过程中,由靶面出射粒子的飞行速度。研究了粒子速度与充氧压及其激光能量密度的关系。讨论了高能粒子在薄膜原位低温外延生长中的作用。     

Metal complexation of crosslinked polyacrylamide-supported dithiocarbamates: Effect of the molecular character and extent of crosslinking on complexation

Dithiocarbamate functions were incorporated into different polyacrylamide matrices crosslinked with a flexible and hydrophilic crosslinking agent, tetraethyleneglycol diacrylate (TEGDA), and their complexation behaviours were investigated. Crosslinked polyacrylamides with varying extents of the tetrafunctional TEGDA crosslinks were prepared by free radical solution polymerization at 60°C using potassium persulphate as initiator in ethanol. The dithiocarbamate functionality was incorporated into these polyacrylamides by a two-step polymer-analogous reaction involving (i)trans-amidation with ethylenediamine and (ii) dithiocarbamylation of the aminopolyacrylamide with carbon disulphide and alkali. The complexations of dithiocarbamate with Cu(II), Ni(II), Zn(II), Co(II) and Hg(II) ions were followed under different conditions. The metal ion intake varied with the extent of the crosslinking agent and the observed trend in complexation is Hg(II) > Cu(II)> Zn(II)> Co(II)> Ni (II). The time-course of complexation, the possibility of recycling, swelling characteristics, and spectral and thermal analyses were carried out. The thermal stability increases upon complexation with metal ions.     

Random multiblock poly(ester amide)s containing poly(L‐lactide) and cycloaliphatic amide segments: Synthesis and biodegradation studies

Novel multiblock poly(ester amide)s containing poly(L ‐lactide) and cycloaliphatic amide segments were synthesized from telechelic oligomer of α,ω‐hydroxyl terminated poly(L ‐lactide), 1,3‐cyclohexylbis(methylamine), and sebacoylchloride by the “two‐step” interfacial polycondensation method. The blocky nature of PEAs was established by FTIR and ¹H NMR spectroscopies. The effect of relative content of ester and amide segments on the crystallization nature of PEAs was investigated by WAXD and DSC analyses. PEAs having lower content of PLLA, PEA 1 and PEA 2, showed a crystallization pattern analogous to polyamides, whereas PEA 3, having higher content of PLLA, showed two crystalline phases characterized by polyester and polyamide segments. Random nature of PEAs was observed from single T_g values. Biodegradation studies using the enzyme lipase from Candida Cylindracea showed higher degradation rate for PEA 3 than that for PEA 1 and PEA 2. FTIR, ¹H NMR, and DSC analyses of the degraded products indicated the involvement of ester linkages in the degradation process. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3250–3260, 2006     

Cascade Grating Structure for Increasing the Channel Number on Holographic Demultiplexer

The expansion capability of the channel number in the optical demultiplexer using two cascaded photopolymer volume gratings is reported. It could be accomplished by designing of two gratings with different spectral range. As a result of the experiment, a 0.4-nm-spaced 130-channel demultiplexer with the channel uniformity of 3.5 dB, the 3 riB-bandwidth of 0.12nm, and the channel crosstalk of-20 dB is experimentally demonstrated.