Products active on mosquitoes,IV: Synthesis and biological activity of 8-propargyloxy-3,7-dimethyl-2,6-octadienyl/6-octenyl ethers

Summary A series of 8-proparglyoxy-3,7-dimethyl-2,6-octadienyl and 8-propargyloxy-3,7-dimethyl-6-octenyl ethers were prepared from 8-hydroxygeranyl and 8-hydroxycitronellyl ethers, respectively. Almost all compounds showed high toxicity toCulex quinquefaciatus larvae at 1 mgl^–1 dose level.

---

Gegen Mücken aktive Produkte, 4. Mitt.: Synthese und biologische Aktivität von 8-Propargyloxy-3,7-dimethyl-2,6-octadienyl/6-octenyl-ethern

Zusammenfassung Eine Reihe von 8-Propargyloxy-3,7-dimethyl-2,6-octadienyl- und 8-propargyloxy-3,7-dimethyl-6-octenyl-ethern wurden aus 8-Hydroxygeranyl- bzw. 8-Hydroxycitronellyl-ethern hergestellt. Fast alle Verbindungen zeigten hoch Toxizität gegenüber Larven vonCulex quinquefaciatus in einer Dosierung von 1 mgl^–1.

     

Synthesis and characterization of SPE membrane based on sulfonated FEP‐g‐acrylic acid by radiation induced graft copolymerization for PEM fuel cell

A Novel solid polymer electrolyte (SPE) membrane containing both ? COOH and ? SO₃H group has been prepared by simultaneous method of radiation grafting of acrylic acid onto FEP followed by sulfonation. The presence of weakly acidic acrylic acid controls the swelling in water while ? SO₃H group provides conductivity due to its strongly ionic characteristic. FEP‐g‐acrylic acid and its sulfonated derivatives were characterized by their properties. While the mechanical properties decreased, other properties such as ion exchange capacity (IEC), water uptake and ionic conductivity increased with increase in graft content. These properties further changed on sulfonation. Acrylic acid being weakly acidic in nature, conductivity values of the grafted membrane were quite low. However, introduction of strong ? SO₃H group resulted in conductivity closer to Nafion 117. Few sulfonated membranes have been tested with respect to H₂/O₂ fuel cell performance. Short‐term fuel cell test for 100 hr gave a stable performance. These membranes are less expensive compared to Nafion. Copyright © 2004 John Wiley & Sons, Ltd.     

Internally stabilized selenocysteine derivatives: syntheses, 77Se NMR and biomimetic studies

Selenocystine ([Sec]2) and aryl-substituted selenocysteine (Sec) derivatives are synthesized, starting from commercially available amino acid l-serine. These compounds are characterized by a number of analytical techniques such as NMR (1H, 13C and 77Se) and TOF mass spectroscopy. This study reveals that the introduction of amino/imino substituents capable of interacting with selenium may stabilize the Sec derivatives. This study further suggests that the oxidation-elimination reactions in Sec derivatives could be used for the generation of biologically active selenols having internally stabilizing substituents.     

Synthesis, characterization and structures of 2-(3,5-dimethylpyrazol-1-yl)ethylseleno derivatives and their probable glutathione peroxidase (GPx) like activity

A series of 2-(3,5-dimethylpyrazol-1-yl)ethylseleno derivatives has been synthesized. The glutathione peroxidase like catalytic activity of these compounds has been studied in a model system, in which reduction of hydrogen peroxide with dithiothreitol (DTT(red)), in the presence of an organoselenium compound was investigated by (1)H NMR spectroscopy. All these compounds exhibit GPx like catalytic activities and the catalytic reaction proceeds through a selenoxide intermediate, identified by (77)Se{(1)H} NMR spectroscopy.     

Tripropylarsane Complexes of Palladium(II) and Platinum(II) — Syntheses,Spectroscopy, and Structures

Several palladium(II) and platinum(II) complexes of tripropylarsanes (AsR₃; R = Pr, iPr) with the formulae, [MCl₂(AsR₃)₂], [M₂Cl₂(μ‐Cl)₂(AsR₃)₂], [Pd₂Me₂(μ‐Cl)₂(AsR₃)₂], [Pd₂X₂(μ‐Pz)₂(AsR₃)₂] (X = Cl or Me, Pz = pyrazolate), [Pd₂Cl₂(μ‐Y)₂(AsR₃)₂] (Y = OAc or SPh), [MCl(S₂CNEt₂)(AsR₃)] and [PdCp(Cl)(AsiPr₃)] (M = Pd or Pt) have been prepared. All the complexes have been characterised by elemental analyses, IR and ¹H NMR spectroscopy. The stereochemistry of the complexes has been deduced from the spectroscopic data. The structures of [Pd₂Me₂(μ‐X)₂(AsiPr₃)₂] (X = Cl or Pz) have been established by single crystal X‐ray diffraction analyses. Both of the complexes have sym‐trans configuration. Strong trans influence of the methyl group is reflected on the Pd—X bond distances.     

Radiation‐grafted solid polymer electrolyte membrane: thermal and mechanical properties of sulfonated fluorinated ethylene propylene copolymer (FEP)‐graft‐acrylic acid membranes

Acrylic acid was grafted onto fluorinated ethylene propylene copolymer (FEP) using a simultaneous radiation technique and the resulting membranes were subsequently sulfonated. Thermal and mechanical properties of these membranes were investigated and were found to be strongly influenced by the degree of grafting. Thermogravimetric analysis (TGA) of these membranes showed that these membranes undergo multistep degradation unlike virgin FEP which degrades in a single step. Glass transition temperature and degree of crystallinity were determined by differential scanning calorimetry (DSC). Glass transition temperature increased while crystallinity decreased with increase in degree of grafting. Tensile strength and elongation at break were found to decrease on grafting and further on sulfonation. Copyright © 2004 John Wiley & Sons, Ltd.     

Studies on molecular weight distribution of carbon fiber polymer precursors synthesized using mixed solvents

The molecular weight distributions were estimated for carbon fiber polymer precursors such as poly（acrylonitrile-co -itaconic acid） synthesized by semi batch solution polymerization in mixed solvents media with the azonitrile compounds as initiator under the different ratios of solvent and non solvent from 0.75 to 2.5 in weight.The copolymer was characterized by using Fourier transform infrared spectroscopy（FTIR） and nuclear magnetic resonance（¹H-NMR） analyses.The molecular weight distributions were evaluated by M_v/M_n ratios estimated from viscosity and osmotic measurements,and M_w/M_n estimated from size exclusion chromatography.The molecular weight distributions of these polymers as determined from M_v/M_n and M_w/M_n are 2.9 to 3.2 and 2.0 to 2.5 respectively.The molecular distributions were close to a narrow distribution of 2.0 when the solvent/non-solvent ratio was varied between 1.4 and 2.0.Intrinsic viscosity[?]as a function of molecular weight of poly（acrylonitrile-co-itaconic acid） was evaluated by means of low angle laser light scattering with size exclusion chromatography（SEC-LALLS） and viscometry with SEC（SEC-VISCO）.The relationship between[?]and M_w for poly（acrylonitrile-co-itaconic acid） in DMF at 50℃was[?]= 1.1×10^-5M_w^0.79,where[?]is obtained in dL/g.     

Radiation‐grafted solid polymer electrolyte membrane: studies of fluorinated ethylene propylene (FEP) copolymer‐g‐acrylic acid grafted membranes and their sulfonated derivatives

Acrylic acid was grafted onto FEP by simultaneous radiation technique and the resulting membranes were sulfonated. Results of dynamic mechanical properties of the membranes showed that storage modulus and temperature at tan δ_(max) increases on grafting. X‐ray diffraction (XRD) analysis of the grafted and sulfonated membranes showed decreasing trend in crystallinity with increase in degree of grafting. From scanning electron microscopy (SEM) studies it was confirmed that grafting takes place by the front mechanism. Copyright © 2004 John Wiley & Sons, Ltd.     

A simple method of determining the activation energy of an isothermal solid-state decomposition reaction

A simple approach to determine the activation energy (E) of solid-state decomposition reactions is described. The activation energy is calculated from the slope of the logarithm of the maximum peak height of the isothermal DTA trace versus the reciprocal of the absolute temperature. The proposed method is applied in the study of the kinetics of thermal decomposition of cadmium carbonate. The activation energy calculated from this method (90.8±2.2 kJ mole^–1) is in very good agreement with the value (87.5±2.5 kJ mole^–1) obtained by the conventional method.

---

Zusammenfassung Eine einfache Annäherung zur Bestimmung der Aktivierungsenergie (E) von Festphasenzersetzungsreaktionen wird beschrieben. Die Aktivierungsenergie wird aus dem Anstieg des Logarithmus der maximalen Peakhöhe der isothermen DTA-Kurve als Funktion der reziproken absoluten Temperatur errechnet. Die vorgeschlagene Methode wird zur Untersuchung der Zersetzungskinetik von Cadmiumcarbonat eingesetzt. Die hiernach berechnete Aktivierungsenergie (90.8±2.2 kJ mol^–1) ist in guter Übereinstimmung mit dem durch die konventionelle Methode erhaltenen Wert (87.5±2.5 kJ mol^–1).

---

Résumé On décrit une méthode simple d'approximation pour déterminer l'énergie d'activation (E) des réactions de décomposition en phase solide. Le calcul de l'énergie d'activation s'effectue à partir de la pente du logarithme de la hauteur maximale du pic de la courbe d'ATD isotherme en fonction de l'inverse de la température absolue. On a appliqué la méthode proposée lors de l'étude de la cinétique de la décomposition thermique du carbonate de cadmium. L'énergie d'activation calculée à partir de cette méthode (90.8±2.2 kJ mole^–1) est en bon accord avec la valeur (87.5±2.5 kJ mole^–1) obtenue par la méthode conventionnelle.

---

. . . (90.8+2.2 .^–1) 87.5± 2.5 .^–1, .

---

---

The authors express their thanks to Dr. V. V. Deshpande and to Shri M. S. Kumbhar for their help in the DTA studies.