Separation of negatively charged carbohydrates by capillary electrophoresis

Capillary electrophoresis (CE) has recently emerged as a highly promising technique consuming an extremely small amount of sample and capable of the rapid, high-resolution separation, characterization, and quantitation of analytes. CE has been used for the separation of biopolymers, including acidic carbohydrates. Since CE is basically an analytical method for ions, acidic carbohydrates that give anions in weakly acid, neutral, or alkaline media are often the direct objects of this method. The scope of this review is limited to the use of CE for the analysis of carbohydrates containing carboxylate, sulfate, and phosphate groups as well as neutral carbohydrates that have been derivatized to incorporate strongly acidic functionality, such as sulfonate groups.     

Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.     

Preparation of a 99mTc-labeled graft polymer and its in vitro and in vivo evaluation

Journal of Radioanalytical and Nuclear Chemistry - The aim of this study is the synthesis of a novel 99mTc-labeld graft polymer and the biological evaluation of its in vitro and in vivo properties....     

Water‐Stable Zirconium‐Based Metal–Organic Framework Material with High‐Surface Area and Gas‐Storage Capacities

We designed, synthesized, and characterized a new Zr‐based metal–organic framework material, NU‐1100 , with a pore volume of 1.53 ccg^?1 and Brunauer–Emmett–Teller (BET) surface area of 4020 m²g^?1; to our knowledge, currently the highest published for Zr‐based MOFs. CH₄/CO₂/H₂ adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions. The total hydrogen adsorption at 65 bar and 77 K is 0.092 g g^?1, which corresponds to 43 g L^?1. The volumetric and gravimetric methane‐storage capacities at 65 bar and 298 K are approximately 180 v_STP/v and 0.27 g g^?1, respectively.     

Quasi-uniformization of topological spaces

Mathematische Annalen -     

Spectral-domain optical coherence phase microscopy for quantitative phase-contrast imaging

We describe a novel microscopy technique for quantitative phase-contrast imaging of a transparent specimen. The technique is based on depth-resolved phase information provided by common path spectral-domain optical coherence tomography and can measure minute phase variations caused by changes in refractive index and thickness inside the specimen. We demonstrate subnanometer level path-length sensitivity and present images obtained on reflection from a known phase object and human epithelial cheek cells.     

Composite polymer particles prepared with different amounts of acrylic acid and their usefulness as carriers for biomolecules

Modification of surface properties of polymer particles suitable for biomedical application has been done by incorporating acrylic acid (AA) as a hydrophilic component. First, submicron-sized poly(methyl methacrylate) seed particles were prepared by soap-free emulsion polymerization. Then, seeded emulsion copolymerizations were carried out with varying proportions of AA and methyl methacrylate (MMA). MMA was used as a comonomer to prevent the dissolution of AA from the polymer particles. The adsorption behaviors of different biomolecules indicate that the surface of the composite polymer particles is sufficiently hydrophilic, particularly at higher AA content. Specific activities of adsorbed trypsin on the composite polymer particles were also comparatively high compared to free trypsin, which suggests that the adsorbed trypsin undergoes only slight conformational change owing to the interaction with the surface of particles.     

Theoretical studies of some sulphonamides as corrosion inhibitors for mild steel in acidic medium

Density functional theory (DFT) at the B3LYP/6‐31G (d,p) and BP86/CEP‐31G* basis set levels and ab initio calculations using the RHF/6‐31G (d,p) methods were performed on four sulfonamides (namely sulfaacetamide (SAM), sulfapyridine (SPY), sulfamerazine (SMR), and sulfathiazole (STI)) used as corrosion inhibitors for mild steel in acidic medium to determine the relationship between molecular structure and their inhibition efficiencies (%IE). The order of inhibition efficiency obtained was SMR > SPY > STI > SAM which corresponded with the order of most of the calculated quantum chemical parameters namely E_HOMO (highest occupied molecular orbital energy), E_LUMO (lowest unoccupied molecular orbital energy), the energy gap (ΔE), the Mulliken charges on the C, O, N, S atoms, hardness (η), softness (S), polarizability (α), dipole moment (μ), total energy change (ΔE_T), electrophilicity (ω), electron affinity (A), ionization potential (I), the absolute electronegativity (χ), and the fraction of electrons transferred (ΔN). Quantitative structure activity relationship (QSAR) approach has been used and a correlation of the composite index of some of the quantum chemical parameters was performed to characterize the inhibition performance of the sulfonamides studied. The results showed that the %IE of the sulfonamides was closely related to some of the quantum chemical parameters but with varying degrees/order. The calculated %IE of the sulfonamides studied was found to be close to their experimental corrosion inhibition efficiencies. The experimental data obtained fits the Langmuir adsorption isotherm. The negative sign of the E_HOMO values and other thermodynamic parameters obtained indicates that the data obtained supports physical adsorption mechanism. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Mesoporous silica and chitosan based pH-sensitive smart nanoparticles for tumor targeted drug delivery

This study investigated inclusion formation and the physicochemical properties of naringin/cyclodextrin through a combined computational and experimental approach. Molecular dynamics simulations were applied to investigate the thermodynamics and geometry of naringin/cyclodextrin cavity docking. The complexes were investigated by UV, FT-IR, DSC, XRD, SEM, 2D-NOSEY and ¹H-NMR analyses. Clearly visible protons belonging to naringin and chemical shift displacements of the H3 and H5 protons in cyclodextrin were anticipated in the formation of an inclusion complex. Naringin solubility increased linearly with increasing cyclodextrin concentration (displaying an A_L profile). The simulations indicated that the phenyl group of naringin was located deep within the cyclodextrin cavity, while the glycoside group of naringin was on the plane of the wider rim of cyclodextrin. The simulation and molecular modeling results indicate that (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) provided the more stable inclusion complex. This result was also in good concordance with the stability constants that had been determined by the phase solubility method. The consistency of the computational and experimental results indicates their reliability.     

The mechanical anisotropy of stratified polyvinyl chloride

The mechanical anisotropy of a material obtained by stratification of oriented polyvinyl chloride (PVC) layers in different ways has been studied. PVC layers, uniaxially oriented by drawing each with a different draw ratio, were stratified in such a way that their draw axes were either parallel or perpendicular. The propagation velocities of ultrasonic pulses were measured in three principal planes defined by draw axes of the stratified material. With an immersion technique, measurements were performed at 2 MHz and 22°C. Experimentally, it was shown that while stratification of layers with draw axes parallel preserves hexagonal symmetry, the stratified material with layers' draw axes perpendicular possesses orthorhombic symmetry. © 1994 John Wiley & Sons, Inc.