Isothermal heat treatment of a thermotropic LCP fiber

The effect of the heat treatment on as-spun fibers made of a commercial liquid crystalline polymer, Vectra®, was examined through tensile properties and differential scanning calorimetry (DSC) measurements. The heat treatment increased the fiber strength considerably, and it also increased the elongation at break. On the other hand, the treatment had a weaker effect on the modulus. In general, the effects of treatment depended on the temperature and on the treatment time used. DSC measurements showed the effect of the treatment on the behavior of the melting endotherm. In light of the development of this endotherm, it seems possible that the structure formed during treatment depends essentially on the treatment temperature. On the whole, an unambiguous correlation between tensile properties and calorimetric quantities could not be concluded.     

Quantum-chemical gas-phase calculations on the protonation forms oftrans- andcis-urocanic acid

The neutral, cationic, and anionic structures of both prototropic tautomers oftrans- andcis-urocanic acid [(E)- and (Z)-3-(1H-imidazol-4(5)-yl)propenoic acid, respectively] were studied by using semiempirical andab initio gas-phase calculations. Potential energy surfaces of the structures were calculated by using the semiempirical AM1 method, and the geometries corresponding to global minima on these surfaces were optimized up to the MP2/6-31G^* level of theory. The calculated protonation forms of each urocanic acid isomer have a planar molecular structure due to a delocalized -electron system, and all of them prefer thes-trans conformation with respect to the bond between the imidazole and the propenoic acid moieties. Thecis-urocanic acid structures are stabilized by an intramolecular hydrogen bond. The chargedcis-urocanic acid isomers have a lower molecular energy than the correspondingtrans-isomers, whereas the neutral molecules have, after inclusion of thermodynamic corrections, approximately the same energy. The cationic urocanic acid structures have about 2500 kJ mol^–1 lower energy than the anionic ones and about 1000 kJ mol^–1 lower energy than the neutral ones. The nonzwitterionic forms of the neutral urocanic acid isomers have about 200 kJ mol^–1 lower energy than the zwitterionic ones. These energy differences are explained by the proton affinities of the imidazole and the propenoic acid moieties of the urocanic acid structures.     

Flow injection analysis : Part VI. The determination of phosphate and chloride in blood serum by dialysis and sample dilution

The rapid determination of chloride and inorganic phosphate in blood serum based on continuous flow spectrophotometry was adapted to Flow Injection Analysis by applying dialysis as well as differential dilution of the injected samples. In addition to the manual injection procedure, an automated microsampling unit was developed and used. By continuous dialysis, chloride could be determined reproducibly at a sampling rate of 125 samples per hour at sample volumes of 60 μl or less. A similar sampling rate and high precision were obtained for the determination of inorganic phosphate by using differential dilution.     

Flow injection analysis. principles,applications and trends

The basic principles of Flow Injection Analysis are outlined. The parameters governing the dispersion of the injected sample zone in the system are discussed, and it is demonstrated how these parameters can be manipulated in order to suit the requirements of an individual analytical procedure. A number of examples illustrating the practical application of f.i.a. are described, comprising the use of automated, stopped-flow, merging-zones, extraction techniques as well as f.i.a. scanning and methods based on intermittent pumping. Updated lists on f.i.a. procedures published and species that can be determined by f.i.a. are included.     

The first decade of flow injection analysis: from serial assay to diagnostic tool

Some 804 papers on flow injection analysis published to the end of May 1985 are summarized. Past trends are discussed and new developments are briefly outlined.The paper entitled “Flow Injection Analysis. Part 1. A New Concept of Fast Continuous Flow Analysis” [1], which appeared in August 1975, was the first of some 804 papers [1/2-804] published on flow injection analysis (f.i.a.) during the past ten years. In the present contribution, all these papers are collected to record the status quo of the general method and to reveal the present trends in applications of f.i.a. and in the geographical distribution of the research activities. Important concepts and technological innovations are reviewed and the future development of f.i.a. is briefly outlined.     

The impact of flow injection on modern chemical analysis: has it fulfilled our expectations? And where are we going?

Presenting a condensation of the opening lecture of the 12th ICFIA conference, this communication presents a view of the impact that flow injection analysis (FIA) has had on modern analytical chemistry, evaluated both within the academic community and outside it, i.e. in “industry”. The ensuing developments of FIA, encompassing sequential injection analysis (SIA) and bead injection lab-on-valve (BI-LOV), are described and their individual features discussed. Finally, some recent results of the activities from the author’s own research group are briefly mentioned.     

On-line sample-pre-treatment schemes for trace-level determinations of metals by coupling flow injection or sequential injection with ICP-MS

Within the last decade, the first generation of flow injection (FI) has been supplemented by sequential injection (SI), also termed the second generation, and, recently, by the third generation, i.e., SI-Lab-on-Valve (SI-LOV). As apparent from the literature, FI and/or SI have become dominant as substitutes for labor-intensive, manual, sample-pre-treatment and/or solution-handling procedures prior to analyte detection by inductively coupled plasma mass spectrometry (ICP-MS). The present review presents and discusses the progress of the state of the art in implementing miniaturized FI/SI systems for on-line matrix separation and pre-concentration of trace levels of metals with detection by ICP-MS. It highlights some of the frequently applied on-line, sample-pre-treatment schemes, including solid phase extraction (SPE), on-wall molecular sorption and precipitate/(co)-precipitate retention using a polytetrafluoroethylene (PTFE) knotted reactor (KR), solvent extraction-back extraction and hydride/vapor generation. It also addresses a novel, robust approach, whereby the protocol of SI-LOV-bead injection (BI) on-line separation and pre-concentration of ultra-trace levels of metals by a renewable microcolumn is interfaced to ICP-MS, as conducted in the present authors' group. It discusses the future outlook in this field.     

Correlation Between Foam Flow Structure in Porous Media and Surfactant Formulation Properties

Transport in Porous Media - The optimization of foam injection in porous media for enhanced oil recovery or soil remediation requires a large screening of surfactant formulations. Tests of foam...