The synthesis mechanism of Ca3Al2O6 from soft mechanochemically activated precursors studied by time-resolved neutron diffraction up to 1000°C

The reaction pathway for the Ca₃Al₂O₆ formation up to 1300°C, from mechanochemically treated mixtures of amorphous aluminum hydroxide and CaCO₃, was studied in situ by differential thermal analysis, constant heating rate dilatometry and time-resolved neutron powder diffraction. The experiment was carried out, in an open system, on a sample with the nominal Ca₃Al₂O₆ stoichiometry. The results obtained by neutron diffractometry and thermal analysis were in good agreement with the data obtained by scanning electron microscopy and X-ray diffraction on heat-treated and-quenched samples. The synthesis path implied the formation of cryptocrystalline Al₂O₃, crystalline CaO, CaAl₂O₄ and Ca₁₂Al₁₄O₃₃ as transitory phases. Finally the nucleation and growth of the single phase Ca₃Al₂O₆ took place at 1300°C and exhibited porous structure due to CO₂ and H₂O release.     

Determination of oxytetracycline, tetracycline, and chlortetracycline in milk by liquid chromatography with postcolumn derivatization and fluorescence detection

A multiresidue method for isolation and liquid chromatographic determination of oxytetracycline (OTC), tetracycline (TC), and chlortetracycline (CTC) in milk is presented. The sensitivity of the method is adequate to meet the needs of regulatory agencies. The European Community established 100 micrograms/kg as the maximum residue limit (MRL) in milk for TC, CTC, and OTC. Recoveries exceeded 80% for all tetracyclines at all levels, with good precision. Correlation coefficients of standards curves for individual tetracyclines isolated from fortified samples ranged from 0.991 for CTC to 0.998 for OTC. Other antibiotics that might interfere with analysis did not interfere with elution times of OTC, TC, and CTC. The procedure is rapid, precise, and quantitative and requires minimal preparation and minimal use of organic solvents. It can be applied to routine surveillance programs. We can prepare 10 samples for analysis in about 1.45 h.     

Selective palladium-catalyzed cocyclotrimerization of arynes with dimethyl acetylenedicarboxylate: A versatile method for the synthesis of polycyclic aromatic hydrocarbons

Benzyne (1a) and the substituted derivatives 4,5-difluorobenzyne (1b) and 3-methoxybenzyne (2) undergo chemoselective palladium-catalyzed [2 + 2 + 2]-cocyclotrimerization with dimethyl acetylenedicarboxylate (DMAD) to afford the corresponding phenanthrenes and/or naphthalenes. The major products are phenanthrenes if Pd(PPh(3))(4) is used as the catalyst, naphthalenes if Pd(2)(dba)(3) is used. When the method is applied to polycyclic arynes 3-6, which are generated from the corresponding o-trimethylsilylaryl triflates, the same reactivity pattern is observed: the reaction can be selectively directed either toward the cocyclization of one molecule of aryne and two molecules of alkyne or to the reaction of two molecules of aryne with one molecule of alkyne, by appropriate choice of the palladium catalyst. The synthesis of polycyclic aromatic compounds 33-39 using this methodology is reported.     

Determination of ochratoxin A in maize bread samples by LC with fluorescence detection

Ochratoxin A (OTA) is a secondary fungal metabolite produced by several moulds, mainly by Aspergillus ochraceus, A. carbonarius, A. niger and by Penicillium verrucosum. The present work shows the results of comparative studies using different procedures for the analysis of OTA in maize bread samples. The studied analytical methods involved extraction with different volumes of PBS/methanol, different extraction apparatus, and clean-up through immunoaffinity columns. The separation and identification were carried out by high-performance liquid chromatography with fluorescence detection. The optimized method for analysis of OTA in maize bread involved extraction with PBS:methanol (50:50), and clean-up with IAC column. The limit of quantification was 0.033 ng g⁻¹. Recoveries ranged from 87% to 102% for fortifications at 2.000 and 0.500 ng g⁻¹, respectively, within-day R.S.D. of 1.4% and 4.7%. The proposed method was applied to 15 samples and the presence of OTA was found in nine samples at concentrations ranging from nd to 2.650 ng g⁻¹.     

Characterization of Pentaclethra macroloba oil

The Pracaxi oil—(Pentaclethra macroloba) contains high concentrations of fatty acids with emollient action that contribute to skin hydration. The use of this oil is supported by the utilization of natural resources thus enabling regional development and social contribution. The objective of this study was to characterize the P. macroloba oil by thermogravimetry (TG, DTG, and DTA), gas chromatography, Fourier transform infrared spectroscopy (FT-IR), and oxidation stability—Rancimat, aiming at the quality control of plant raw material. Three samples of crude oil sold by Amazon Oil Industry (Ananindeua, Pará, Brazil) were studied. The analysis of these oil samples showed different fatty acids, especially the behenic, oleic, linoleic, and lignoceric acids totalizing approximately 96 % of the grease composition and in smaller percentage arachidic, lauric, myristic, palmitic, and linolenic acids were found. The major acids have wide medicinal use. According to the TG/DTG curve, thermal stability was observed up to 220 °C, indicating a greater mass loss related to the dehydration and elimination of volatile substances. The thermal decomposition process occurred in the range of 430–450° C according to the DTG curve. The absorption spectrum in the infrared region (FT-IR) showed well-defined bands confirming the presence of functional groups present in the oil. Tests in a Rancimat have shown an induction period between 8 and 10 h demonstrating that the samples are in agreement with the standards required by ANP No. 14/2012 which requires at least 6 h of testing.     

Kinetics of particle growth VII. NH4NO3from the NH3-O3 reaction in the presence of air and water vapor

Our earlier work on the formation of particulate NH₄NO₃ in the NH₃? O₃ reaction at 25°C is extended to include air as a diluent and H₂O vapor as an additive. More extensive data at different values of [NH₃]/[O₃]₀ were obtained also, where [O₃]₀ is the initial O₃ concentration. In our earlier work we concluded that NH₄NO₃ vapor was dissociated to NH₃ + HNO₃ and that the HNO₃ was removed by diffusion to the walls with a rate coefficient k_diff = 0.4 min^?1 or by condensation on the suspended particles. Particles were nucleated by 8 NH₃? HNO₃ pairs when their concentration product reached 5.8 × 10²⁷ molec²/cm⁶ with a rate coefficient k_nucl of 6.2 × 10^?224 cm⁴⁵/min and removed by coagulation with a rate coefficient k_coag of 1.3 × 10^?7 cm³/min. A corrected calculation modifies the number of pairs required to 6–7 with a correspondingly changed value of k_nucl. With the more extensive data of the present study the indications are that the vapor-phase NH₄NO₃ monomer is not dissociated and that its diffusion constant for loss to the walls varies between 0.3 and 0.9 min^?1 for different reaction conditions. Nucleation occurs when the NH₄NO₃ vapor concentration reaches 1.0 × 10¹² molec/cm³ via. where r is 9 and the nucleation rate coefficient k_nucl is 3 × 10^?108 cm²⁴/min. With 5.0 or 9.5 torr of H₂O vapor present, there is an excess of particles produced over that expected from this rate coefficient, indicating an additional nucleation step in which H₂O vapor participates directly to produce a hydrated salt. The coagulation coefficient of (1.87 ± 0.14) × 10^?7 cm³/min found here is in good agreement with that found previously.     

Synthesis of peptide-nanotube platinum-nanoparticle composites

Nanotubes prepared by the self-assembly of D-Phe-D-Phe molecules are investigated by electron microscopy and Monte Carlo simulations; the nanotubes appear to be porous and are capable of forming novel peptide-nanotube platinum-nanoparticle composites.     

Simultaneous ultrasound-assisted emulsification-derivatization as a simple and miniaturized sample preparation method for determination of nitrite in cosmetic samples by microvolume UV-vis spectrophotomety

A simple and miniaturized approach based on ultrasound-assisted emulsification-derivatization is proposed for the determination of nitrite in cosmetic samples by UV-vis micro-spectrophotometry. Oil/water emulsions were formed using 15 mg of cosmetic sample and 1 mL of an aqueous medium containing 0.5% w/v SDS and 1% v/v acetic acid. When powerful sonication systems were used to make emulsions, i.e. probe or cup-horn sonoreactor, stable and transparent emulsions were obtained in one or half minute per sample, respectively. The Griess reaction in these special conditions (i.e. sonication and the presence of an organized medium) was investigated. The absence of matrix effects allows external calibration with aqueous standards for nitrite quantification. Analytical features were compared to those of the European official method 82/434/EEC. Detection limit, sample throughput and reagent consumption were significantly improved.     

Development and validation of a fast isocratic liquid chromatography method for the simultaneous determination of norfloxacin,lomefloxacin and ciprofloxacin in human plasma

A simple and fast liquid chromatographic method coupled with fluorescence detection (LC‐FD) is reported, for the first time, for the simultaneous quantification of norfloxacin (NOR), ciprofloxacin (CIP) and lomefloxacin (LOM) in human plasma, using levofloxacin as internal standard (IS). Sample preparation consists of a single‐step precipitation of plasma proteins followed by vortex‐mixing and centrifugation. Chromatographic separation was achieved within 7 min on a reversed‐phase C₁₈ column with a mobile phase consisting of 0.1% aqueous formic acid (pH = 3.0, triethylamine)–methanol (82:18, v/v) pumped isocratically at 1.2 mL/min. The detector was set at excitation/emission wavelengths of 278/450 nm. Calibration curves were linear (r² ≥ 0.994) in the range of 0.02–5.0 µg/mL, and the limit of quantification was established at 0.02 µg/mL for all analytes (NOR, CIP and LOM). The overall precision did not exceed 8.19% and accuracy was within ±10.91%. NOR, CIP and LOM were extracted from human plasma with an overall mean recovery ranged from 90.1 to 111.5%. No interferences were observed at the retention times of the analytes and IS. This novel LC‐FD method enables the reliable determination of NOR, CIP and LOM in a single chromatographic run, which may be suitable to support human pharmacokinetic‐based studies with those antimicrobial agents. Copyright © 2010 John Wiley & Sons, Ltd.