Promoting effect of Pt in Ni-based catalysts for CH4 reforming

The effect of Pt/Ni ratio on the surface properties and catalytic behavior of bimetallic PtNi catalysts for reforming of methane with CO₂ was studied. The TPR, FTIR of adsorbed CO and XPS data showed that introduction of a small amount of Pt (0.3 – 0.5 wt.%) into the Ni catalyst leads to a decrease of the NiO size, its easy reduction and a uniform distribution of the nickel metal particles.     

Azoalkanes—novel flame retardants and their structure–property relationship

A number of symmetrical and unsymmetrical azoalkanes of the general formula R′?N = N?R and related azoxy, hydrazone as well as azine derivatives have been synthesized in order to assess their potential as novel flame retardants for polypropylene alone or in combination with commercially available flame retardants such as alumina trihydrate (ATH), decabromodiphenyl ether (DecaBDE) and tris(3‐bromo‐2,2‐bis(bromomethyl)‐propyl)phosphate (TBBPP). The experimental results show that in the series of different sized azocycloalkanes the flame retardant efficacy decreased in the following order: R = cyclohexyl > cyclopentyl > cyclobutyl > cyclooctanyl >> cyclododecanyl. Whereas in the series of aliphatic azoalkanes compounds the efficacy decreased in the following order: R = n‐alkyl > tert‐butyl > tert‐octyl. In addition, also some of the prepared azoxy, azine, and hydrazone derivatives provide flame retardancy to polypropylene films at already very low concentrations (0.25–1 wt%). Noteworthy is that in contrast to other halogen‐free radical generators, the azoalkanes are also very effective as flame retardants in polypropylene thick moldings. Interestingly, it was found that 4,4′‐bis(cyclohexylazocyclohexyl)‐methane) shows a strong synergistic effect with ATH. Thus, in the presence of 0.5 wt% of azoalkane the ATH loading could be reduced from 60 to 25 wt% and still UL94 V‐2 rating could be reached. Furthermore, the fire testing data reveal that azoalkanes show a synergistic effect with DecaBDE and when used in conjunction with very low loadings of TBBPP. Copyright © 2010 John Wiley & Sons, Ltd.     

Study of uniformity of plasmas produced in a wall‐stabilized arc

In this contribution the plasma of an arc discharge in a mixture of helium and argon is studied. The gas mixture is introduced uniformly along the arc column between each of the stabilizing plates. From the measured lateral distribution of radiation (HeI, HI, ArI, ArII, NI, FI line intensity and width measurements), after Abel inversion, the radial temperature distributions were obtained at various positions of the arc column. Beside the expected radial temperature gradients, a distinct temperature gradient along the arc column was found.     

Capillary electrophoretic determination of main components of natural dyes with MS detection

CE with UV-Vis and MS detections was investigated as a technique for detection of main components of selected natural dyes of plant and insect origin. The BGE giving the best separation of the investigated flavonoids and anthraquinoids, suitable for MS detection consisted of 40 mM ammonium acetate solution of pH 9.5 with 40% ACN. LODs obtained with MS detection were even one order of magnitude lower than the ones obtained with UV-Vis detection. Application of MS detection enabled determination of eleven dye compounds from three different chemical groups in 15 min. and proved to be more satisfactory than diode-array detection in the electrophoretic analysis of main classes of natural dyes both in terms of selectivity and sensitivity of analysis.     

Mechanistic information on the copper-catalysed autoxidation of mercaptosuccinic acid in aqueous solution

Copper(II) ions react rapidly with sulfur from thiol groups, forming two distinct, intensely absorbing, short-lived intermediates, which decompose in a subsequent redox reaction to produce reduced copper and disulfides. In this study we report the results of a mechanistic study on the reaction between mercaptosuccinic acid, HO(2)CCH(2)CH(SH)CO(2)H, and Cu(2+)(aq) and [Cu(tren)H(2)O](2+), tren = tris(2-aminoethyl)amine. Spectroscopic and kinetic data indicate that in the presence of an excess of thiol, at least two distinct complexes are formed, with very different decomposition rate constants and an absorption maximum at 346 nm. Upon addition of thiol to [Cu(tren)H(2)O](2+)(1:1), a transient with a maximum at 380 nm appears, whereas in an excess of thiol this complex decomposes and again the 346 nm band is observed. The use of [Cu(tren)H(2)O](2+) enables to study the reaction of thiol with copper also in alkaline solution, where the rate of the overall process is slowed down greatly. The reactions were studied in detail, including the effect of dioxygen, and a possible reaction mechanism for the catalysed autoxidation process is proposed and discussed in reference to available literature data.     

Structure and surface properties of praseodymium modified alumina

Mixed PrO₂-Al₂O₃ oxides with different PrO₂ content (1-20 wt.%) were prepared by wetness impregnation of γ-alumina with aqueous solution of praseodymium nitrate. The samples were characterized by different techniques, using surface adsorption-desorption of N₂ (S_BET), thermogravimetric analysis (TGA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), temperature-programmed reduction (TPR) and temperature-programmed desorption of CO₂ (TPD-CO₂). TGA and XRD showed the presence of small praseodymium oxide species on the alumina surface. XPS and DRS detected electron deficient interaction between deposited praseodymium oxide and alumina. It was observed a lower reduction temperature for supported Pr oxide species compared to that of the bulk Pr₆O₁₁. TPD-CO₂ studies suggested that the deposition of Pr oxide on alumina leaded to increase of the basicity of mixed oxides.     

Electron beam treatment of high NOx concentration off-gases

High concentration of NO_x removal from simulated off-gases was investigated using electron beam (EB) technology. Simulated off-gases were prepared by combusting Polish light oil or nature gas with addition of NO from a NO gas cylinder. Irradiation was carried out under a ILU-6 accelerator. It was found that removal efficiency of NO_x was influenced by inlet concentration of NO, temperature, SO₂ concentration, absorbed dose and irradiation dose rate. Methods of enhancing NO_x removal efficiency with additives using EB were also discussed.     

Estimation of the plasma temperature by using the resolved spectrum of N<Subscript>2</Subscript><Superscript>+</Superscript>

This publication analyzes the problems of estimating the gas temperatures in the nitrogen-containing plasma in the temperature regions between 4 and 9 kK. Problems of low and high resolution molecule bands spectroscopy and temperature derivation is discussed and the proposition of the quick procedure is presented. Its validity is tested by comparison of the temperatures derived from different molecular bands by the help of the Boltzmann rotational structure diagrams. The perturbation in the molecular spectrum is exploited to choose the most easily resolved spectral lines.     

NO Oxidation with NaClO,NaClO2, and NaClO3 Solution Using Electron Beam and a One Stage Absorption System

Plasma Chemistry and Plasma Processing - The reduction of high concentrations of NOX and SO2 has been studied for the simulation of NOX and SO2 removal from off-gases generated by diesel engines in...     

Morphological investigation of nanostructured CoMo catalysts

This work reports the morphological investigation of nanostructured sulfided CoMo catalysts by means of high-resolution transmission electron microscopy (HRTEM). The catalysts were supported on Ti-modified hexagonal mesoporous silica (HMS-Ti) and P-modified HMS-Ti (P/HMS-Ti) materials. The oxide precursors were characterized by specific surface area (S_BET), temperature-programmed reduction (TPR), diffuse reflectance infrared Fourier transform spectroscopy in the OH region (DRIFTS-OH) and X-ray photoelectron spectroscopy (XPS) in order to elucidate the influence of the impregnation sequence (successive vs. simultaneous) and the effect of P-incorporation into HMS-Ti material on the morphology of calcined CoMo catalysts. Both TPR and XPS measurements indicate that the catalysts prepared by successive impregnation possess well-dispersed MoO₃ and CoO phases, whereas their counterparts prepared by simultaneous impregnation additionally possess the CoMoO₄ phase. For all sulfided catalysts, the presence of MoS₂ phase with particle size in the range 3.3-4.4 nm was confirmed by HRTEM. Catalytic activity was evaluated in the reaction of hydrodesulfurization (HDS) of dibenzothiophene (DBT) carried out in a flow reactor at 593 K and hydrogen pressure of 5.5 MPa. P-incorporation into the HMS-Ti material led to an overall increase in HDS activity and the hydrogenation ability of the sulfided catalysts. All catalysts proved to be stable during 10 h time-on-stream (TOS) operation. The activity of sulfide catalysts in the target reaction depends linearly on the surface exposure of Co species in the oxide precursors, as determined by XPS, and on the morphology of the sulfide form of catalysts (surface density of MoS₂ particles and their sizes) as determined by HRTEM.