Linear calibration procedure for the phase-to-height relationship in phase measurement profilometry

Calibration of the relationship between height and phase is of uttermost importance to perform accurate 3D measurements in phase measurement profilometry. This work reports a different approach to this problem by first looking at the analytical expression for this relationship and determining the regime spanned by the fringe analysis method. The conclusions thus ascertained, amply justify confronting the analytical expression with a simple normalization procedure of the experimental data, with a remarkable matching between both results. In light of this, a linear calibration procedure with just one plane is proposed and verified experimentally.     

Analysis and finite element simulations of a second‐order fluid model in a bounded domain

This article is concerned with the equations governing the steady motion of a viscoelastic incompressible second‐order fluid in a bounded domain. A new proof of existence and uniqueness of strong solutions is given. In addition, using appropriate finite element methods to approximate a coupled equivalent problem, sharp error estimates are obtained using a fixed point argument. The method is applied to the two‐dimensional lid‐driven cavity problem, at low Reynolds number and in a certain range of values of the viscoelastic parameters, to analyze the combined effects of inertia and viscoelasticity on the flow. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

Surface characterization of recycled tire rubber to be used in cement paste matrix

The surface modification of tire rubber after treatment with saturated NaOH aqueous solution was investigated by HATR infrared analysis, potentiometric titration, and contact angle measurements. Infrared analysis of the powdered treated rubber showed a decrease in absorption at 1540, 1450, and 1395 cm(-1). This decrease is attributed to the removal of zinc stearate, an additive present in tire formulations that often migrates and diffuses to the surface, resulting in poor adhesion between the rubber and other materials. The potentiometric titration of the suspension of powdered rubber in 0.1 M NaCl showed that more hydrochloric acid was consumed by the untreated rubber, most likely a result of the hyrdrolysis of the zinc stearate to the organic acid. Contact angles of flat tire pieces showed an homogeneity enhancement of the treated rubber surface. The decrease of the zinc stearate on the treated rubber surface explains the improvement in the adhesion of this material to the cement matrix, observed in a previous research. The promising results of this study are a starting point for future research on incorporating rubber particles into cementitious materials as a means of successfully utilizing the vast amounts of tire waste currently in landfills.     

The use of imidazolium ionic liquids for the formation and stabilization of ir0 and rh0 nanoparticles: efficient catalysts for the hydrogenation of arenes

Stable transition-metal nanoparticles of the type [M(0)](n) are easily accessible through the reduction of Ir(I) or Rh(III) compounds dissolved in "dry" 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid by molecular hydrogen. The formation of these [M(0)](n) nanoparticles is straightforward; they are prepared in dry ionic liquid whereas the presence of the water causes the partial decomposition of ionic liquid with the formation of phosphates, HF and transition-metal fluorides. Transmission electron microscopy (TEM) observations and X-ray diffraction analysis (XRD) show the formation of [Ir(0)](n) and [Rh(0)](n) nanoparticles with 2.0-2.5 nm in diameter. The isolated [M(0)](n) nanoparticles can be redispersed in the ionic liquid, in acetone or used in solventless conditions for the liquid-liquid biphasic, homogeneous or heterogeneous hydrogenation of arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered iridium nanoparticles can be reused several times without any significant loss in catalytic activity. Unprecedented total turnover numbers (TTO) of 3509 in 32 h, for arene hydrogenation by nanoparticles catalysts, have been achieved in the reduction of benzene by the [Ir(0)](n) in solventless conditions. Contrarily, the recovered Rh(0) nanoparticles show significant agglomeration into large particles with a loss of catalytic activity. The hydrogenation of arenes containing functional groups, such as anisole, by the [Ir(0)](n) nanoparticles occurs with concomitant hydrogenolysis of the C-O bond, suggesting that these nanoparticles behave as "heterogeneous catalysts" rather than "homogeneous catalysts".     

Chemical, structural, and thermal properties of Zn(II)-Cr(III) layered double hydroxides intercalated with sulfated and sulfonated surfactants

Zn(II)-Cr(III)-LDHs (layered double hydroxides) containing sulfated or sulfonated surfactants as the interlamellar anion were synthesized by the coprecipitation method. The syntheses were conducted under various different experimental conditions, such as the Zn : Cr ratio, pH, and aging time. In each of the prepared materials, unlike previously reported data, the interlayer anion arrangement did not change, being consistent with a perpendicular monolayer. The thermal decomposition process of the prepared materials was studied by a set of analysis methods, such as TG/DTA, TG/MS, PXRD, and FT-IR. From the results obtained it was possible to conclude that, in an air atmosphere, the anions decomposed by a partial combustion, leading to the formation of sulfide. The results also showed that sulfonated surfactants containing LDHs are much more stable than those containing sulfated surfactants. A mechanism was proposed for the thermal decomposition of such LDHs based on the experimental results.     

On the High Viscosity of Aqueous Solution of Lysozyme Induced by Some Organic Solvents

A remarkably high viscosity has been induced in protein aqueous solutions by the addition of certain structurally related organic solvents. The effect has been observed for lysozyme aqueous solutions containing tetramethylurea (TMU), dimethylsulfoxide (DMSO), dimethylformamide, and hexamethylphosphortriamide. The effect has also been induced in ferrocytochrome c aqueous solutions by TMU. Critical concentrations for both the protein and organic solvent were verified for the onset of the viscosity increase. A common feature of the solvents which were able to induce the effect is a dipolar moiety (C=O, S → O and P → O) and a nonpolar region represented by the methyl groups. The resulting fluids show an extremely restricted flow and a typical non-Newtonian, pseudoplastic behavior. Use was made of¹H nuclear magnetic resonance (NMR) and Raman spectroscopy to characterize protein structural modifications and of¹³C NMR to investigate changes in relaxation times and chemical shifts in the solvent/water solutions. A systematic rheological characterization of the systems was undertaken for some of the solvents, and unusual patterns of viscous effects were identified for the solvent/water systems both with and without protein. The process was found to be at least partially reversible, as concluded from the recovered original solution rheological characteristics and the original protein¹H NMR spectrum, after eliminating the organic solvent by ultrafiltration. The whole process was characterized as consisting of two mutually independent stages. The first involves an extensive conformational transition of the polypeptide backbone, from a predominantly α-helical to increased random coiled and β-sheet structures, with the occurrence of nonorthodox protein secondary structures at regions above the solvent critical point. The second stage consists of short-lived interchain contacts leading to an entanglement of the macromolecular system as a whole. A microphase reversion in the organic solvent/water mixture, supported by¹³C NMR and rheological results, is proposed as the driving force causing the observed behavior.     

TWO WATER-SOLUBLE FLUORESCENCE PROBES FOR CHEMIEXCITATION STUDIES: SODIUM 9,10-DIBROMO- AND 9, 10-DIPHENYLANTHRACENE-2-SULFONATE. SYNTHESIS, PROPERTIES AND APPLICATION TO TRIPLET ACETONE AND TETRAMETHYLDIOXETANE

The syntheses of sodium 9,10-dibromo- and 9,10-diphenylanthracene-2-sulfonate (DBAS and DPAS, respectively) are described and their photophysical properties determined. These two probes were used in aqueous solution studies of the kinetic parameters of tetramethyldioxetane thermolysis, which were found to be the same as in organic solvents. The yields of triplet and singlet acetone generated by the decomposition of this dioxetane in water are also comparable to the literature values in organic medium. The lifetime of triplet acetone in water was determined to be 13 ± 2 u.s by a method based on the measurement of the fluorescence decay of DBAS excited via energy transfer from triplet acetone, by the time-correlated single-photon counting technique. Sorbate ion quenches triplet acetone from tetramethyldioxetane with a rate constant smaller but close to the diffusion-controlled limit.     

Nickel determination in osteoblast-like cell culture medium by adsorptive cathodic stripping voltammetry with a mercury microelectrode

The purpose of this study is to investigate the influence of nickel, which is an alloying element in commonly used metallic biomaterials, on the biomaterials mineralization process. An electrochemical method was developed to quantify this metal ion in osteoblast-like cell culture medium (OST) by performing adsorptive cathodic stripping voltammetry (CSV) with dimethylglyoxime (DMG) at a mercury film microelectrode (MFM). The optimized analytical conditions and the square-wave CSV parameters for the analysis are: DMG concentration: 5.00 × 10⁻⁴ mol L⁻¹; ammonium chloride buffer: 0.10 mol L⁻¹ (pH 9.2); frequency: 50 Hz, amplitude 20 mV; step: 2 mV; adsorption time: 10 s, deposition potential: −0.70 V and reduction potential: −1.20 V. The limit of detection was 7.70 × 10⁻⁹ mol L⁻¹ for an adsorption time of 10 s. The results achieved by CSV using the MFM were compared to those obtained by atomic absorption spectrometry (AAS) to ensure the reliability of the electrochemical method. The mineralization process was evaluated by biochemical and histochemical assays.     

1,3-Diaxial steric effects and intramolecular hydrogen bonding in the conformational equilibria of new cis-1,3-disubstituted cyclohexanes using low temperature NMR spectra and theoretical calculations

The conformational equilibria of 3-X-cyclohexanol [X=F (1), Cl (2), Br (3), I (4), Me (5), NMe(2) (6) and MeO (7)] and of 3-X-methoxycyclohexane [X=F (8), Cl (9), Br (10), I (11), Me (12), NMe(2) (13) and MeO (14)] cis isomers were determined from low temperature NMR spectra and PCMODEL calculated coupling constants. The energy differences between aa and ee conformers were obtained from these data (DeltaG(J)(av) and DeltaG(PC)(av), respectively) and also by the additivity principle from data for the monosubstituted cyclohexanes (DeltaG(Ad)). H-1 and H-3 hydrogen vicinal coupling constants and DeltaG(J)(av) values showed that the diequatorial conformer is predominant in the conformational equilibrium of the compounds studied at low temperature. However, DeltaG(PC)(av) data show that compounds 6 and 7 constitute an exception, since they are almost equally populated by ee and aa at room temperature, due to stabilization of their aa conformer by an intramolecular hydrogen bond. DeltaG(Ad) values, obtained according to the additivity principle, show a better agreement for compounds 2 and 3, since the 1,3-diaxial steric effect is counterbalanced by the formation of an intramolecular hydrogen bond (IAHB). For the remaining compounds, DeltaG(Ad) values underestimate the energy differences, since the 1,3-diaxial steric effect, between X and OH or OCH(3), is absent in the monosubstituted compounds used as references. Moreover, the DeltaG(PC)(av), calculated from the coupling constants, obtained through the PCMODEL program, are rather smaller than the DeltaG(J)(av) values, since the program does not have parameters for the effect, observed in this report, of a substituent at gamma position on coupling constants values for the hydrogen under consideration.