Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Working group report: Flavor physics and model building

This is the report of flavor physics and model building working group at WHEPP-9. While activites in flavor physics have been mainly focused on B-physics, those in model building have been primarily devoted to neutrino physics. We present summary of working group discussions carried out during the workshop in the above fields, and also briefly review the progress made in some projects subsequently.     

Bi-large neutrino mixings by radiative magnification

Starting with the unification hypothesis of mixings of quarks and leptons and small quark-like mixings at the see-saw scale, we find that two large mixings for ν_e —νx03BC; andv _μ—v _τ at the weak scale are obtained as a result of renormalization group evolution and radiative magnification if the three neutrinos are quasi degenerate in masses and possess the same CP parity. We also find thatU _e3 remains small and well within the CHOOZ-Palo Verde bound since the correspondingV _ub for CKM mixing is very small. Several testable pedictions are pointed out.     

Sulfated nanozirconia: an investigation on acid-base properties and n-butane isomerization activity

Hydrated zirconia was synthesized by an organo-inorganic route employing surfactant and was sulfated using aqueous ammonium persulfate, followed by drying at 110 degrees C. The sample thus obtained was calcined at 600 degrees C to obtain sulfated zirconia and was characterized by several physicochemical methods. Crystallite sizes of sulfated zirconia were calculated from X-ray line broadening using the Debye-Scherer equation and were found to be in the range of 25 nm. When pretreated in air, the catalyst was found to exhibit butane isomerization activity at a temperature as low as 35 degrees C under atmospheric pressure. It showed conversion as high as 37% at 100 degrees C under normal pressure when pretreated in air, whereas nitrogen-pretreated catalyst showed zero activity under similar conditions. NH(3) and CO(2) temperature-programmed desorption studies on air- and helium-pretreated samples indicated that the catalyst surface changes appreciably during air pretreatment. Results on butane isomerization in conjunction with TPD studies suggest that zirconium-oxy sites play an important role in butane activation during the reaction.     

Effect of heat treatment on the physico-chemical properties and catalytic activity of manganese nodules leached residue towards decomposition of hydrogen peroxide

The effect of calcination temperature on the physico-chemical characterization of manganese nodule leached residue (MNLR) and water-washed manganese nodule leached residue (WMNLR) has been investigated on the basis of chemical analysis, XRD, TG-DTA, FTIR, surface hydroxyl groups, surface oxygen, reducing and oxidizing sites, surface area. XRD and IR confirm the presence of amorphous iron oxyhydroxides, delta-MnO2, which are converted to alpha-Fe2O3 and gamma-Mn2O3 phases above 400 degrees C of calcination, respectively. A solid solution of Fe2O3 and Mn2O3 is formed above 700 degrees C. The surface area, surface hydroxyl group, surface oxygen, reducing and oxidizing sites increase with the increase in calcination temperature up to 400 degrees C and then decrease with further rise in calcination temperature up to 700 degrees C. The catalytic activity of the sample towards H2O2 decomposition shows the similar trend as surface properties. A suitable Mn(3+)Mn4+ couple favours H2O2 decomposition reaction. The activity has been correlated with various physico-chemical properties.     

High surface area silicon carbide from rice husk: A support material for catalysts

Ultrafine -SiC with high surface area (150 m² g^–1) has been synthesized by inflight processing of charred rice husk in a r.f. plasma reactor operating at atmospheric pressure. The plasma-synthesized particles were doped with platinum (1%) and tested as a catalytic support material. The catalyst (1% Pt doped -SiC) showed 100% conversion of CO to CO₂ at a temperature as low as 175°C.     

In vitro and in silico study of Aloe vera leaf extract against human breast cancer

Abstract

Aloe vera leaf contains some bioactive compounds that have a strong binding affinity toward estrogen receptor as compared to standard drug tamoxifen. In this study, we have found that the IC₅₀ of Aloe vera leaf extract against breast cancer cell line (MCF-7) is 23?µg/mL which is much lower than the IC₅₀ (332?µg/mL) of Aloe vera leaf extract against non-cancerous cell line (NIH-3T3). We have also calculated the total concentration of phenolic acid (385.662?µg/mL), flavonoids (160.402?µg/mL) and alkaloids (276.754?µg/mL) in Aloe vera leaf extract. The free radical scavenging activity of Aloe vera leaf extract is 67% to 89% (at 50 to 300?µg/ml). Our virtual molecular docking study suggests that bioactive compounds like Aloe-emodin (?8.8?Kcal/mol), 7-hydroxy-2,5 dimethylchromone (?7.5?Kcal/mol), Beta-sitosterol (?7.3?Kcal/mol) etc. have a greater binding affinity toward estrogen alpha receptor as compared to standard drug Tamoxifen (?6.4?Kcal/mol).