Constraint Molecular Dynamics and results on isotopic distributions produced in heavy ion collision — The Sn + Ni systems

The Constraint Molecular Dynamics approach is illustrated together with calculation on different heavy ion collisions. In particular the charge-mass distribution produced in the collision ¹²⁴Sn + ⁶⁴Ni and ¹¹²Sn + ⁵⁸Ni at 35 MeV/nucleon is discussed. By comparing the Y = (N ? Z)/A distributions for fragments produced in central collisions it results that this observable can be sensitive to the dynamic effects induced on the two systems by the different charge/mass ratio.     

Modelling of composting of food waste in a column reactor

The composting of organic solid waste, the mixture of fruit and vegetable leftovers enriched with night soil, was investigated in a closed thermally insulated reactor. It was found that 80.9 % of the original substrate biodegraded after 14 days. A mathematical model of the column reactor was proposed where the biodegradation rate of the organic solid waste was described using simple n-thorder kinetics. A good prediction of process performance was obtained using the proposed kinetics and experimentally obtained reaction heat. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Regioselective synthesis of virazole using benzyl cyanoformate as a synthon

An antiviral nucleoside or virazole was synthesized efficiently and regioselectively starting with benzyl cyanoformate.     

Titanocene-catalyzed formation of allylsilanes from allyl ethers and chlorosilanes

A new method for silylation of allyl ethers with chlorosilanes has been developed by the use of Cp₂TiCl₂ as a catalyst. This reaction proceeds efficiently at −20 °C in THF using ⁿBuMgCl. A plausible reaction pathway via allyltitanocene intermediate was proposed.     

Factors affecting physicochemical properties of liposomes prepared with hydrogenated purified egg yolk lecithins by the microencapsulation vesicle method

We examined hydrogenated purified egg yolk lecithins, having practical advantages over non-hydrogenated ones, as liposomal membrane materials. Liposomes were prepared by the microencapsulation vesicle (MCV) method in which liposomes are formed through two-step emulsification and dispersion. Three types of purified egg yolk lecithins with different iodine values were examined after being dissolved in one of three lipid solvents. The liposome size increased as the temperature during the second emulsification increased, being closer to the boiling temperature of the solvent. The preparation temperature in relation to the transition temperature of each lecithin was also a factor affecting liposome sizes. As for the encapsulation efficiencies of the model compound calcein in liposomes, they differed mainly depending on the solubility of each lecithin in a lipid solvent and it was more obvious in hydrogenated lecithins. A high preparation temperature resulted in lower encapsulation efficiencies, suggesting that leakage of encapsulated calcein was facilitated at high temperature in the MCV methods. There was a significant correlation between liposome sizes and encapsulation efficiencies in non-hydrogenated purified egg yolk lecithin but not in hydrogenated ones. When using hydrogenated purified egg yolk lecithins as liposomal membrane materials, it was suggested that a lipid solvent should be chosen so that a lecithin completely dissolves under the preparation condition in order to achieve a higher encapsulation efficiency. Smaller liposome particles were obtained when the second emulsification was performed at a lower temperature compared with the boiling point of the lipid solvent. These findings can be applied to control encapsulation efficiencies and particle sizes in each particular liposome preparation enclosing therapeutic agents.     

Solid-state electrode with a Cu(I)-based membrane hydrophobised by PTFE for the measurement of Cu2+ and I?

The preparation of CuI + Ag₂S and Cu₂[HgI₄] + Ag₂S membranes hydrophobised by PTFE is described. The pressed membranes mounted in a multi-purpose all-solid-state electrode body have been examined as electrochemical sensors for Cu²⁺ and I^– ions. For the electrode with (CuI + Ag₂S + PTFE)-membrane experimental slopes of 29 mV(pCu)^–1 and 62 mV(pI)^–1 were obtained, in good agreement with the theoretical values. For practical measurement in solutions where both Cu²⁺ and I^– can be present, the investigated electrode offers certain advantages in comparison with a commercial Cu-ISE.     

Pure and doped lanthanum cobaltites obtained by combustion method

We report the synthesis of La_1−xSr_xCoO₃ nanopowders by solution combustion method using metal nitrates and -alanine (alanine method) or urea (urea method) as fuel. The influence of metal nitrates/organic substance molar ratio and the type of fuel was investigated. The isolated complex precursors were characterized by atomic absorption spectroscopy (AAS), FT-IR spectra and DTA–TG analysis. The La_1−xSr_xCoO₃ (x = 0–0.3) powders were characterized by X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray analysis (SEM–EDX), as well as by specific surface area measurements. XRD patterns indicate the formation of single-phase LaCoO₃ (rhombohedral) when as-synthesized powders were calcined at 873 K, 3 h in the case of the alanine method and at 1073 K, 3 h for urea-based system. Also, strontium doped lanthanum cobaltites obtained by both methods at 1273 K are single phase with rhombohedral perovskite-like structure as XRD data have proved. SEM investigation of pure and doped lanthanum cobaltites reveal that the samples prepared by both methods have fine particles with tendency of agglomerates formation with different shapes, spongy aspect and high porosity. La_1−xSr_xCoO₃ nanopowders obtained by alanine method have larger specific surface area values than those prepared by urea method.     

Solid-state electrode with a Cu(I)-based membrane hydrophobised by PTFE for the measurement of Cu2+ and I−

The preparation of CuI + Ag₂S and Cu₂[HgI₄] + Ag₂S membranes hydrophobised by PTFE is described. The pressed membranes mounted in a multi-purpose “all-solid-state” electrode body have been examined as electrochemical sensors for Cu²⁺ and I^? ions. For the electrode with (CuI + Ag₂S + PTFE)-membrane experimental slopes of 29 mV(pCu)^?1 and 62 mV(pI)^?1 were obtained, in good agreement with the theoretical values. For practical measurement in solutions where both Cu²⁺ and I^? can be present, the investigated electrode offers certain advantages in comparison with a commercial Cu-ISE.