Structural Changes of Cellulose Crystallites Induced by Mercerisation in Different Solvent Systems; Determined by Powder X-ray Diffraction Method

The completeness of mercerisation can be evaluated by investigating the changes in the crystalline regions of cellulose from cellulose I (C-I) to cellulose II (C-II) by the X-ray powder diffraction method. Mercerisation experiments in four different solution systems: ethanol/water, acetone, DMSO and xylene, are reported. Also the effect of some additives, external pressure, treatment time and alkalisation temperature were studied. In two-phase solvent systems, structural changes of cellulose crystallites depended primarily on the distribution and solubility of sodium hydroxide in the solvent phases. The sodium hydroxide concentration in the hydrophilic phase must exceed 7–8 w/w-% before complete crystal change from C-I to C-II can occur. The precipitation of sodium hydroxide due to high concentration prevents the successful use of one-phase ethanol/water system in slurry process. On the contrary, the 2-propanol/water/sodium hydroxide system separates into two layers; to the water-rich lower layer and the 2-propanol-rich upper layer, where the sodium hydroxide remains mainly in the water-rich lower layer. This prevents the precipitation of sodium hydroxide and promotes the alkalisation of cellulose. Ammonium chloride and ammonium hydroxide clearly had a positive effect by promoting the crystal changes, however, the urea concentration used in this study was obviously too small. In the advantageous two-phase 2-propanol/water systems, the alkalisation time was only 15 min when the treatment temperature was kept between 0 and 10 °C. Reduced external pressure was found to have a small but still detectable positive effect on cellulose alkalisation while over-pressure prevented crystal changes.     

A new ionic liquid dimethyldinonylammonium bromide as a flow modifier for the simultaneous determination of eight carboxylates by capillary electrophoresis

Two new methods of capillary zone electrophoresis based on aqueous phosphate running buffers with UV spectrophotometric detection were developed and optimized for the determination of eight carboxylates as copper complexes. Metalcomplexes are negatively charged, so measurements were made as anion analyses with flow reversal in the capillary. Two flow modifiers were used: a common tetradecyltrimethylammonium bromide (TTAB) and a new ionic liquid dimethyldinonylammonium bromide (DMDNAB). The methods were compared to each other. Better separation was achieved with DMDNAB as the flow modifier. Method development was done using a fused silica capillary (61 cm x 50 microm i.d.).Optimization was done using 95 mmol L(-1) phosphate buffer with TTAB or DMDNAB in the concentration 0.5 mmol L(-1) at pH 7.1. A -20 kV voltage and direct UV detection at 254 nm was used in measurements. In both CE methods all the peaks in the electropherograms were properly separated, the calibration plots gave good correlation coefficients and all eight carboxylates were detected in less than 7.5 min. The two methods were tested with natural water samples and a paper mill sample, and proved to be feasible.     

Characteristics and safety of nano-sized cellulose fibrils

A finely ground fibrillated cellulose was fractionated into separate size fractions. The characteristics of the smallest size fractions were studied, and the toxicity to humans was tested as part of a safety assessment. Morphological studies performed with state-of-the-art methods, such as scanning electron microscopy and atomic force microscopy, showed that the fraction obtained consisted of long thin fibrils but also larger fibril agglomerates, and spherical particles were present. The finest fraction did not show any sub-lethal effects as assessed by RNA inhibition test in vitro, nor were there any indications of genotoxicity as tested by the Ames test in vitro. Systemic effects tested in vivo with the nematode were also absent. No cytotoxic effects were seen in the highest tolerated dose test in vitro, but some indication of cytotoxicity was observed in the total protein content test in vitro at the highest sample concentration. The significance of this toxicity test result should be addressed in relation to the other toxicity tests, in which no toxicity was observed, with special emphasis on the in vivo test. Given this, the overall toxicity analyses support the conclusion that nano-scale cellulose fibrils can be considered to be safe towards humans. However, the reason for the positive cytotoxicity test result and, in addition, the effect of the biocide used in sample preservation on the toxicity tests need to be clarified before generalizing these results and declaring nanocellulose to be unambiguously safe.     

On string topology of classifying spaces

Let G be a compact Lie group. By work of Chataur and Menichi, the homology of the space of free loops in the classifying space of G is known to be the value on the circle in a homological conformal field theory. This means in particular that it admits operations parameterized by homology classes of classifying spaces of diffeomorphism groups of surfaces. Here we present a radical extension of this result, giving a new construction in which diffeomorphisms are replaced with homotopy equivalences, and surfaces with boundary are replaced with arbitrary spaces homotopy equivalent to finite graphs. The result is a novel kind of field theory which is related to both the diffeomorphism groups of surfaces and the automorphism groups of free groups with boundaries. Our work shows that the algebraic structures in string topology of classifying spaces can be brought into line with, and in fact far exceed, those available in string topology of manifolds. For simplicity, we restrict to the characteristic 2 case. The generalization to arbitrary characteristic will be addressed in a subsequent paper.     

On the choice of the initial value of a quadratic spline in positive interpolation

Any quadratic spline with coinciding interpolating points and breakpoints can be uniquely determined by one initial condition. We examine how to choose the initial value in positive interpolation by using a norm of the spline. Monotone interpolation is also considered. The results are illuminated by numerical examples and by an application.     

Parallel screening of homogeneous copper catalysts for the oxidation of benzylic alcohols with molecular oxygen in aqueous solutions

A simple and efficient parallel screening method to evaluate the catalytic activities of homogeneous copper complexes for the oxidation of benzylic alcohols in aqueous solutions with molecular oxygen is reported. Copper(II) sulfate was treated in situ with 22 nitrogen donor ligands, and the catalytic activities of these combinations were studied at four different pH values with two substrates (benzyl alcohol and 3,4-dimethoxy benzyl alcohol (veratryl alcohol)), resulting in 176 oxidation experiments in the primary screening stage. Copper complexes based on N,N,N',N'-tetramethyl ethylenediamine (TMEDA), 9,10-diaminephenanthrene (DAPHEN), and 1,2-diaminocyclohexane (DACH) were determined to be the most active catalysts. In the second screenings, the influence of reaction conditions on Cu(DACH)-, Cu(TMEDA)-, and Cu(DAPHEN)-catalyzed reactions were investigated in more detail. It was found that highly basic reaction conditions favor the reaction with the exception of Cu(TMEDA), which is active at a lower pH range. Under optimized conditions, Cu(DAPHEN) catalyzes the transformation of veratryl alcohol to the corresponding aldehyde with 100% conversion.     

Synthesis and thermal behavior of Janus dendrimers,part 2

The thermal properties of twelve Janus-type dendrimers up to the second generation were evaluated by termogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Compounds consist of the dendritic bisMPA based polyester moieties, and either 3,4-bis-dodecyloxybenzoic acid, 3,5-bis-dodecyloxybenzoic acid or 3,4,5-tris-dodecyloxybenzoic acid moieties, attached to opposite sides of the pentaerythritol core. The thermal stability of the compounds was evaluated by TGA, displaying onset decomposition temperatures (T_d) at around 250 °C. DSC measurements upon heating and cooling confirmed that OH terminated Janus dendrimers featuring large polarity difference in opposite sides display liquid crystalline phases with exception of 3,5-type G1 dendrimer; while acetonide terminated dendrimers displayed merely melting transitions. Dendrimers having terminal alkyl chains at positions 3,4 or 3,4,5 in aromatic moieties exhibited enantiotropic mesophases. However, the thermal behavior of the dendrimers with 3,5-substitution pattern was different: the 3,5-type G1 dendrimer exhibit a lack of mesomorphic transition, and in the case of the 3,5-type G2 dendrimer, the mesophase was absent in the first heating scan but was observed during the subsequent cooling and heating scans at the rate of 10 °C/min.     

Avoiding eddy-current problems in ultra-low-field MRI with self-shielded polarizing coils

In ultra-low-field magnetic resonance imaging (ULF MRI), superconductive sensors are used to detect MRI signals typically in fields on the order of 10-100 μT. Despite the highly sensitive detectors, it is necessary to prepolarize the sample in a stronger magnetic field on the order of 10-100 mT, which has to be switched off rapidly in a few milliseconds before signal acquisition. In addition, external magnetic interference is commonly reduced by situating the ULF-MRI system inside a magnetically shielded room (MSR). With typical dipolar polarizing coil designs, the stray field induces strong eddy currents in the conductive layers of the MSR. These eddy currents cause significant secondary magnetic fields that may distort the spin dynamics of the sample, exceed the dynamic range of the sensors, and prevent simultaneous magnetoencephalography and MRI acquisitions. In this paper, we describe a method to design self-shielded polarizing coils for ULF MRI. The experimental results show that with a simple self-shielded polarizing coil, the magnetic fields caused by the eddy currents are largely reduced. With the presented shielding technique, ULF-MRI devices can utilize stronger and spatially broader polarizing fields than achievable with unshielded polarizing coils.