Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

The Organization of Interaction Between Oil Refineries

The paper deals with the appropriate form of interaction between two refineries with different demand patterns. This problem can be formulated as finding a decentralized solution of linear programming problems linked by buying and selling activities. The complete problem is first solved for central values of product demands and costs and revenues. The structure of the basis then determines the organization of the interaction in terms of which unit sets quantities and which prices, or whether centralized decisions should be made. If, for expected values of product demand and costs, the structure of the basis is the same then the related organization of trading can be used for day-to-day transactions. For a well-known oil refinery model it is found that, for fairly large demand variations, decentralized interaction is effective, but that the structure of the basis changes easily with crude price variations, and that simulations did not converge for these variations.     

Determination of metal additives and bromine in recycled thermoplasts from electronic waste by TXRF analysis

A new method for analysis of metal additives in recycled thermoplasts from electronic waste was developed, based on dissolving the samples in an organic solvent and subsequent analysis of the corresponding solutions or suspensions by total-reflection X-ray fluorescence spectroscopy (TXRF). The procedure proved to be considerably less time consuming than the conventional digestion of the polymer matrix. Additives containing Ti, Zn, Br, Cd, Sn, Sb, and Pb were analyzed in a hundred randomly selected samples from recycling, which provided an overview of the range of elemental concentrations in thermoplasts utilized for consumer electronics. The results were validated independently by instrumental neutron activation analysis (INAA), subsequent regression analysis confirmed the trueness of the chosen approach.     

Speciation of gadolinium in surface water samples and plants by hydrophilic interaction chromatography hyphenated with inductively coupled plasma mass spectrometry

Hydrophilic interaction chromatography (HILIC) coupled with inductively coupled plasma mass spectrometry (ICP-MS) was optimized for speciation analysis of gadolinium-based contrast agents in environmental samples, in particular surface river waters and plants. Surface water samples from the Teltow channel, near Berlin, were investigated over a distance of 5 km downstream from the influx of a wastewater treatment plant. The total concentration of gadolinium increased significantly from 50 to 990 ng?L^?1 due to the influx of the contrast agents. After complete mixing with the river water, the concentration remained constant over a distance of at least 4 km. Two main substances [Dotarem® (Gd-DOTA) and Gadovist® (Gd-BT-DO3A)] have been identified in the river water using standards. A gadolinium-based contrast agent, possibly Gd-DOTA (Dotarem®), was also detected in water plant samples taken from the Teltow channel. Therefore, uptake of contrast agents [Gadovist® (Gd-BTDO3A), Magnevist® (Gd-DTPA), Omniscan® (Gd-DTPA-BMA), Dotarem® (Gd-DOTA), and Multihance® (Gd-BOPTA)] by plants was investigated in a model experiment using Lepidium sativum (cress plants). HILIC–ICP-MS was used for identification of different contrast agents, and a first approach for quantification using aqueous standard solutions was tested. For speciation analysis, all investigated contrast agents could be extracted from the plant tissues with a recovery of about 54 % for Multihance® (Gd-BOPTA) up to 106 % for Gadovist® (Gd-BT-DO3A). These experiments demonstrate that all contrast agents investigated are transported from the roots to the leaves where the highest content was measured.     

Radiative models of laser-induced plasma and pump-probe diagnostics relevant to laser-induced breakdown spectroscopy

The paper describes past and present efforts in modeling of laser-induced plasma and overviews plasma diagnostics carried out by pump-probe techniques. Besides general information on existing plasma models, the emphasis is given to models relevant to spectrochemical analysis, i.e. models of radiating plasma. Special attention is paid to collisional-radiative (CR) and collisional-dominated (CD) plasma models where radiative processes play an important role. Also, calibration-free (CF) models are considered which may endow with the possibility for standardless spectroscopic analysis. In the diagnostic part, only methods based on the use of additional diagnostic tools (auxiliary lasers, optics, and probes) are described omitting those based on plasma own radiation. A short review is provided on image-based diagnostics (shadowgraphy, schlieren, and interferometry), absorption and fluorescence, Langmuir probe, and less frequently used cavity ringdown and Thomson scattering methods.     

Determination of metal additives and bromine in recycled thermoplasts from electronic waste by TXRF analysis

A new method for analysis of metal additives in recycled thermoplasts from electronic waste was developed, based on dissolving the samples in an organic solvent and subsequent analysis of the corresponding solutions or suspensions by total-reflection X-ray fluorescence spectroscopy (TXRF). The procedure proved to be considerably less time consuming than the conventional digestion of the polymer matrix. Additives containing Ti, Zn, Br, Cd, Sn, Sb, and Pb were analyzed in a hundred randomly selected samples from recycling, which provided an overview of the range of elemental concentrations in thermoplasts utilized for consumer electronics. The results were validated independently by instrumental neutron activation analysis (INAA), subsequent regression analysis confirmed the trueness of the chosen approach. Received: 7 February 2000 / Revised: 25 February 2000 / Accepted: 1 March 2000     

MALDI-TOF imaging mass spectrometry of artifacts in “dried droplet” polymer samples

Matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) imaging of polystyrenes with various molecular masses was applied to study spatial molecular mass distribution of polymers in sample spots prepared by the “dried droplet” method. When different solvents and target surfaces were examined, a segregation of single homologous polymers was observed depending upon the evaporation rate of the solvent. For the observed patterns left by the evaporating droplet, a hypothesis is offered taking into account different hydrodynamic interactions and diffusion. The results illustrate that spot preparation using the conventionally “dried droplet” method is prone to artifacts and should be avoided for reliable and reproducible MALDI mass spectrometry experiments with regards to the determination of molecular masses and mass distributions.     

Wavelength dispersion in fiber optical detection of time-resolved fluorescence

Summary Fiber optical recorded time-resolved fluorescence emission spectra distorted by wavelength dispersion have been investigated. Calculated and measured transit times for long fibers (50 m) are in good agreement. A simple correction algorithm was proposed resulting in time-resolved spectra of second-order, bilinear structure. Two different deconvolution algorithms using either an entire spectrum or single fluorescence decay curves from different wavelengths were used to calculate the lifetimes of rhodamine B and anthracene.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday