Electrocatalytic activity of sol-gel-prepared RuO2/Ti anode in chlorine and oxygen evolution reactions

Electrocatalytic properties of RuO₂/Ti anode with different coating masses, which are prepared by the alkoxide sol-gel procedure, are investigated in chlorine and oxygen evolution reactions by polarization measurements and electrochemical impedance spectroscopy in H₂SO₄ and NaCl electrolytes. According to polarization measurements, the activity of anodes at overpotentials below 100 mV is independent of coating mass. However, impedance measurements above 100 mV reveal changes in the activity of anodes in chlorine evolution reaction for different coating masses. The diffusion limitations related to the evolved chlorine are registered in low-frequency domain at 1.10 V (SCE), diminishing with the increase in potential to the 1.15 V (SCE). The observed impedance behavior is discussed with respect to the activity model for activated titanium anodes in chlorine evolution reaction involving formation of gas channels within porous coating structure. Gas channels enhance the mass transfer rate similarly to the forced convection, which also increases the activity of anode. This is more pronounced for the anode of greater coating mass due to its more compact surface structure. The more compact structure appears to be beneficial for gas channels formation. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1173–1179. The text was submitted by the authors in English.     

The evolution of comprehensive two-dimensional gas chromatography (GC x GC)

For a technology little over a decade old, comprehensive two-dimensional gas chromatography (GC x GC) has quickly reached the status of one of the most powerful analytical tools for volatile organic compounds. At the heart of any GC x GC system is an interface, which physically connects the primary and the secondary columns and acts to preserve the separation obtained in the first dimension (first column) while allowing additional separation in the second dimension. The paper presents a review of the technology, including fundamental principles of the technique, data processing and interpretation and a timeline of inventive contributions to interface design. In addition, applications of the technique are presented, with a more detailed discussion of selected examples.     

Synthesis and thermal properties of NiSbS–As doped phase

The substitution of Sb with As in the NiSbS intermetallic compound was studied in the framework of evaluating a possible increase of the thermoelectric properties. Different NiSb_1?xAs_xS samples were synthesized with increasing amounts of As (0 < x < 0.66) employing a simple synthetic route using a muffle furnace. Scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy was used to investigate the microstructure. X-ray powder diffraction techniques were employed in order to study the possible existence of a solid solution between NiSbS and NiAsS compounds, as well as to identify the crystal structure and determine the lattice parameters. All compounds were found to crystallise with the NiSbS prototype (cP12-P2₁3), with lattice parameters varying from a = 0.59341(7) nm (x = 0) to a = 0.56849(6) nm (x = 1). Good agreement with Vegard’s law was evidenced. Thermal measurements on NiSb_1?xAs_xS samples were carried out using DTA instruments to evaluate the thermal stability and the melting temperatures.     

Spatial dependency of the groundwater uranium in the alluvial soil region of Gunnaur,India

Journal of Radioanalytical and Nuclear Chemistry - GIS based groundwater uranium and other physico-chemical parameters pH, electrical conductivity, oxidation reduction potential, temperature,...     

Applications of liquid crystals in biosensing and organic light-emitting devices: future aspects

ABSTRACT

This article summarises recent advances made in our laboratory towards the development of new technological applications, such as biosensors and organic light-emitting diodes (OLEDs) based on liquid crystals (LCs) other than LC displays. The study of biomolecular interaction using LC material relies on the specific interaction between the LC and the biomolecule of interest at interfaces that permit the biomolecular events to be amplified into easily measured signals for various sensing applications. In the first part, we emphases recent studies in the design and modulation of LC-based interfaces based on robust colloidal LC gels for biological amplification, qualitative and quantitative understanding of important biomolecular interactions at LC–aqueous interfaces for diagnostic and laboratory applications and design of LC droplets that hold promise to act as a marker for cells and cell-based interactions. In the second part, we described design of organic materials for application in OLEDs on various discotic monomers, dimers and oligomers. These molecules have the ability to transport charges, holes and electrons. In addition, because of the high conductivity and π–π stacking, they are considered as the advanced materials for practical applications. The technological advances in our laboratory using discotic LCs will be briefly presented in this article.     

Mortar element methods for parabolic problems

In this article a standard mortar finite element method and a mortar element method with Lagrange multiplier are used for spatial discretization of a class of parabolic initial‐boundary value problems. Optimal error estimates in L^∞(L²) and L^∞(H¹)‐norms for semidiscrete methods for both the cases are established. The key feature that we have adopted here is to introduce a modified elliptic projection. In the standard mortar element method, a completely discrete scheme using backward Euler scheme is discussed and optimal error estimates are derived. The results of numerical experiments support the theoretical results obtained in this article. © 2008 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 2008     

Different responses of E:Z‐isomers of pesticides in liquid chromatography–electrospray ionization–mass spectrometry

The mass spectrometric behavior of four pairs of stereoisomers was investigated by liquid chromatography–electrospray ionization–mass spectrometry (LC–ESI–MS). The E‐ and Z‐isomers of the pesticides chlorfenvinphos, dimethomorph, mevinphos and phosphamidon—each with one double bond—were chosen for this study. The MS response of the individual isomers was investigated by infusing the isomers individually into the MS or after the separation of isomer mixtures via high‐performance liquid chromatography(HPLC). In the case of dimethomorph, the same MS response was found for the two isomers. In contrast to that, the individual isomers of chlorfenvinphos, mevinphos and phosphamidon showed different MS response both in the single ion monitoring (SIM) mode in single quadrupole MS and multiple reaction monitoring (MRM) mode in tandem MS. The MS response of the isomers partly depends on (1) the declustering potential of the precursor ion in the SIM mode, (2) the selected transition and (3) the collision energy in the MRM mode. Consequently, quantification by summation of the peak areas of the isomers is inaccurate due to over‐ or underestimating of one of the stereoisomers. Accurate quantitative results can only be achieved when the compound‐specific MS parameters are separately determined for each isomer. This can be done by using pure isomers or by the determination of the MS parameters after HPLC separation and the measurement of the actual isomer ratio with an independent technique. Copyright © 2010 John Wiley & Sons, Ltd.