UV curable epoxy acrylate-clay nanocomposites

UV curable epoxy acrylates were reinforced with two different organically modified montmorillonites (MMTs) and an unmodified MMT. Conversion and rate of polymerization was monitored by real time infrared spectroscopy (RTIR) and photo-DSC. Microstructures were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and optical clarity. Optical clarity of the films containing clay was quite good as only a slight decrease was observed. Physical properties of the reinforced films were examined by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), hardness and tensile testing. Enhancements in glass transition temperature (T_g), thermal stability and mechanical properties were observed. The films reinforced with the unmodified MMT exhibit the most significant enhancements in properties.     

A one-pot synthesis of 1,4-dithiins and 1,4-benzodithiins from ketones using the recyclable reagent 1,1′-(ethane-1,2-diyl)dipyridinium bistribromide (EDPBT)

A novel access to 1,4-dithiins and 1,4-benzodithiins from the corresponding ketones in one-pot using the recyclable reagent, 1,1′-(ethane-1,2-diyl)dipyridinium bistribromide (EDPBT) is described. This method is mild, simple, environmentally benign and is applied successfully for the ring expansion of 1,3-dithiolane to 1,4-dithiins and the ring expansion associated with aromatisation of cyclic ketones with or without double bonds in the ring. The main feature of this method is that EDPBT acts as a promoter in the formation of 1,3-dithiolane and as a reagent in the ring expansion step. The spent reagent can be recovered, regenerated and reused.     

The use of McMurry coupling for the synthesis of indolophanes and cis-stilbenophanes

Treatment of 2 equiv of indole-3-aldehyde with o, m, p-xylyl, 2,5-dimethoxy-p-xylyl dibromides and 4,4′-bis(bromomethyl)-1,1′-biphenyl gave the bisalkylated products, which underwent McMurry coupling with low valent titanium to give indolophanes. Various cis-stilbenophanes with m-terphenyl building blocks were also synthesized by application of the McMurry coupling technique.     

Phase separation of quaternary solubilized solutions or micro emulsion of hydrocarbons containing sodium oleate + phenol + benzene + water by freezing point measurements

Summary The depressions in freezing point measurements in quaternary solubilized solutions or micro-emulsion in sodium oleate + phenol + benzene + water are measured. Maxima and minima were observed, Gibbs' phase rule was applicable, eutectic points were detected, congruent melting points were obtained, loose combination of molecules or clusters, were formed, phases of the system transferred and finally unstable emulsion separated out. This is contrary to the views ofMcBain who called these solutions as thermodynamically stable. The results were compared with the conductivity, stability and heat of solubilization-concentration measurements.

---

Zusammenfassung Es wird die Gefrierpunktserniedrigung von quaternären solubilisierten Lösungen im System Natriumoleat-Phenol-Benzol-Wasser gemessen. Die verschiedenen Befunde (Maxima und Minima des Gefrierpunktes in Abhängigkeit von der Zusammensetzung, Anwendbarkeit der Gibbs'schen Phasenregel, Auftreten von Eutektika, kongruente Schmelzpunkte etc.) dienen zum Beweis, daß diese Lösungen thermodynamisch instabil sind.

---

---

With 5 figures and 1 table     

DAPPA grafted polymer: an efficient solid phase extractant for U(VI), Th(IV) and La(III) from acidic waste streams and environmental samples

A new class of polymeric resin has been synthesized by grafting Merrifield chloromethylated resin with (dimethyl amino-phosphono-methyl)-phosphonic acid (MCM-DAPPA), for the preconcentration of U(VI), Th(IV) and La(III) from both acidic wastes and environmental samples. The various chemical modification steps involved during grafting process are characterized by FT-IR spectroscopy, ³¹P and ¹³C-CPMAS (cross-polarized magic angle spin) NMR spectroscopy and CHNS/O elemental analysis. The water regain capacity data for the grafted polymer are obtained from thermo-gravimetric (TG) analysis. The influence of various physico-chemical parameters during the quantitative extraction of metal ions by the resin phase are studied and optimized by both static and dynamic methods. The significant feature of this grafted polymer is its ability to extract both actinides and lanthanides from high-level acidities as well as from near neutral conditions. The resin shows very high sorption capacity values of 2.02, 0.89 and 0.54 mmol g⁻¹ for U(VI), 1.98, 0.63 and 0.42 mmol g⁻¹ for Th(IV) and 1.22, 0.39 and 0.39 mmol g⁻¹ for La(III) under optimum pH, HNO₃ and HCl concentration, respectively. The grafted polymer shows faster phase exchange kinetics (<5 min is sufficient for 50% extraction) and greater preconcentration ability, with reusability exceeding 20 cycles. During desorption process, all the analyte ions are quantitatively eluted from the resin phase with >99.5% recovery using 1 M (NH₄)₂CO₃, as eluent. The developed grafted resin has been successfully applied in extracting Th(IV) from high matrix monazite sand, U(VI) from sea water and also U(VI) and Th(IV) from simulated nuclear spent fuel mixtures. The analytical data obtained from triplicate measurements are within 3.9% R.S.D. reflecting the reproducibility and reliability of the developed method.     

Chemical Composition of Essential Oil from Pilea microphylla and its Antimicrobial Activity

Chemistry of Natural Compounds -     

The Synthesis and Bioactivity of Dimethyl (2,3- Dihydrobenzo[b][1,4]Dioxin-6-Yl)(Aryl Amino)Methylphosphonates

Abstract

A new series of α-aminophosphonates have been synthesized by a one-pot three-component reaction of 2,3-dihydrobenzo[b][1,4]dioxine-6-carbaldehyde, various amines, and dimethyl phosphite by using nano-TiO₂ as a catalyst under solvent-free conditions at 50°C. The major advantages of the present method are high yields, short reaction times, recyclable catalyst, and solvent-free reaction conditions. Among these new structurally diversified set of α-aminophosphonates, dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(3-nitrophenylamino) methylphosphonate and dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(4-fluoro-3-nitro-phenyl-amino) methylphosphonate have shown higher antioxidant activity in diphenyl picryl hydrazyl (DPPH) scavenging, reducing power assay, and lipid peroxidation methods.