Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Acidic peroxo salts. A new class of initiators for vinyl polymerization. I. Kinetics of polymerization of acrylonitrile initiated by potassium monopersulfate catalyzed by Ag(I)

The kinetics of polymerization of acrylonitrile initiated by KHSO₅ and catalyzed by Ag(I) have been investigated in an aqueous medium over the temperature range of 35–50°C. The rates of polymerization R_p have been calculated and studied with respect to monomer and initiator. The catalytic activity of various metal ions on the initiator has been determined from a comparison of R_p values. The effects of monomer, catalyst, neutral salts, various amines, and inhibitor (hydroquinone) on the initial rate as well as maximum conversion have been studied. From the kinetics results a suitable reaction scheme has been proposed.     

Thermodynamics of silver—silver halide electrodes and thermodynamic solubility products of silver halides in glycerol + water mixtures at different temperatures

The standard potentials of silver—silver bromide and silver—silver iodide electrodes in glycerol+water mixtures containing 5, 10, 20 and 30 wt% glycerol were determined from electromotive force measurements of the cell Ag(s), AgX(s), KX(c)//KCl(c), AgCl(s), Ag(s), where X is Br or I, at seven different temperatures in the range 5–35°C. The standard potentials in each solvent are represented as a function of temperature. The standard thermodynamic functions for the electrode reactions, the primary medium effects of various solvents upon X⁻, and the standard thermodynamic quantities for the transfer of 1 g-ion of X⁻ from water to the respective glycerol + water media are evaluated and discussed in the light of ion—solvent interactions as well as the structural changes of the solvents. From the values of the Ag/Ag⁺ and Ag/AgX, X⁻ electrodes, the thermodynamic solubility product constants of silver chloride, silver bromide and silver iodide have been determined in glycerol + water solvent mixtures at different temperatures.     

Theoretical and experimental studies of asymmetric organozinc additions to benzaldehyde catalyzed by flexible and constrained gamma-amino alcohols

The cis-decalin based gamma-amino alcohols, 1-5, were synthesized, resolved, and employed as catalysts in the addition of organozincs to benzaldehyde. Despite large facial differentiation in the RZn adducts of the ligands, the enantioselectivities were found to be moderate. Transition structure calculations were done using several quantum chemical methods to examine the underlying causes of the selectivity for three gamma-amino alcohols, 1, 2, and 3. The tricyclic mu-oxo (6/4/4), rather than the bicyclic six-membered (6/6), transition structures were found to explain the observed enantioselectivity for 2 and 3. MP2 calculations gave the best correlation to the experimental results compared to B3LYP and HF calculations. The conformational flexibility of the chiral ligands was found to be an important factor in the selectivity.     

A samarium cyclooctatetraene complex as catalyst for hydroamination/cyclisation catalysis

The cyclooctatetraene-bis(phosphinimino)methanide complex [[CH(PPh2NSiMe3)2]Sm(eta8-C8H8)] has been prepared; although this compound has no alkyl or amide ligand it shows moderate activity as a catalyst for the hydroamination/cyclisation reaction.     

Polymerization of acrylonitrile. Kinetics of the reaction initiated by the Ce(IV)/thioacetamide redox system

Vinyl polymerization of acrylonitrile initiated by the Ce(IV)/thioacetamide redox system has been investigated in aqueous sulfuric acid in the temperature range of 10–20°C. The rate of polymerization (R_p) and the rate of Ce(IV) disappearance (?R_Ce) were measured. The effect of certain water-soluble organic solvents, added electrolytes, and aromatic and heterocyclic organic nitrogen compounds on the rate of polymerization has been investigated. Depending on the experimental results, we have suggested a suitable reaction scheme for the system which involves the production of initiating radicals from the oxidation of thioacetamide (TAm) by ceric ion and the termination of the polymer chain by metal ions.     

Platinum complexes of diazo ligands. Studies of regioselective aromatic ring amination, oxidative halogen addition and reductive halogen elimination reactions

2-(Arylazo)pyridine ligands, L1a-1c react with the salt K2[PtCl4] to give the mononuclear complexes [PtCl2(L1)](1), which readily react with ArNH2 to yield the monochloro complexes of type [PtCl(L2)](HL2= 2-[(2-(arylamino)phenyl)azo]pyridine)(2) via regioselective ortho-amine fusion at the pendent aryl ring of coordinated L1. Oxidative addition of the electrophiles Y2(Y = Cl, Br, I) to the square-planar platinum(II) complex, has led to syntheses of the corresponding octahedral platinum(IV) complexes, [PtY3(L2)](3) in high yields. Ascorbate ion reductions of the platinum(IV) complexes, , resulted in reductive halogen elimination to revert to the platinum(II) complexes almost quantitatively. Isolation of products and X-ray structure determination of the representative complexes followed all these chemical reactions. In crystal packing, the compound [PtCl2(L1c)](1c) forms dimeric units with a Pt...Pt distance of 3.699(1) A. In contrast, the crystal packing of 2b revealed that the molecules are arranged in an antiparallel fashion to form a noncovalent 1D chain to accommodate pi(aryl)-pi(pyridyl) and Pt-pi(aryl) interactions. Notably, the oxidation of [Pt(II)Cl(L2a)](2a) by I2 produced a mixed halide complex [Pt(IV)ClI2(L2a)](5), which, in turn, is reduced by ascorbate ion to produce [Pt(II)I(L2a)] with the elimination of ClI. All the platinum(II) complexes are brown, the platinum(IV) complexes, on the other hand, are green. Low-energy visible range transitions in the complexes of the extended ligand [L2]- are ascribed to ligand basedpi-pi* transitions. Cyclic voltammetric behaviour of the complexes is reported.     

Synthesis of Potential Antiviral Agents for SARS-CoV-2 Using Molecular Hybridization Approach

We synthesized a set of small molecules using a molecular hybridization approach with good yields. The antiviral properties of the synthesized conjugates against the SAR-CoV-2 virus were investigated and their cytotoxicity was also determined. Among all the synthesized conjugates, compound 9f showed potential against SARS-CoV-2 and low cytotoxicity. The conjugates’ selectivity indexes (SIs) were determined to correlate the antiviral properties and cytotoxicity. The observed biological data were further validated using computational studies.     

Essential Oils as Novel Anthelmintic Drug Candidates

Helminths, with an estimated 1.5 billion annual global infections, are one of the major health challenges worldwide. The current strategy of the World Health Organization to prevent helminth infection includes increasing hygienic awareness, providing better sanitation and preventative anthelmintic drug therapy in vulnerable populations. Nowadays, anthelmintic drugs are used heavily in livestock, both in case of infection and as a preventative measure. However, this has led to the development of resistance against several of the most common drugs, such as levamisole, ivermectin and thiabendazole. As many as 70% of the livestock in developed countries now has helminths that are drug resistant, and multiple resistance is common. Because of this, novel anthelmintics are urgently needed to help combat large-scale production losses. Prior to this review, no comprehensive review of the anthelmintic effects of essential oils and their components existed. Multiple review articles have been published on the uses of a single plant and its extracts that only briefly touch upon their anthelmintic activity. This review aims to provide a detailed overview of essential oils and their components as anthelmintic treatment against a wider variety of helminths.