Isolation of Bisphenol A-Tolerating/degrading Shewanella haliotis Strain MH137742 from an Estuarine Environment

Applied Biochemistry and Biotechnology - The human exposure to bisphenol A (BPA) occurs frequently. Once, this compound was one of the highest volume chemicals produced worldwide and used as a...     

Pretreatment of sugarcane bagasse hemicellulose hydrolysate for xylitol production byCandida guilliermondii

Applied Biochemistry and Biotechnology - In order to remove or reduce the concentrations of toxic substances present in the sugarcane bagasse hemicellulose hydrolysate for xyloseto-xylitol...     

Extraction and determination of phenolic derivatives in water samples by using polyoxyethylene surfactants and liquid chromatography with photodiode array detection

Methodology based on the cloud-point phenomenon was applied to the comparative study of 3 different polyoxyethylene nonionic surfactants in order to extract and preconcentrate a group of phenolic derivatives in water samples; these phenolic compounds, which were determined by liquid chromatography with UV detection, included 11 pollutants given priority by the U.S. Environmental Protection Agency. The optimum conditions for the extraction and preconcentration of phenolic compounds were established for each surfactant. The surfactant that gave the best extraction and preconcentration of the analytes under study was polyoxyethylene 6 lauryl ether (C12E6) with detection limits of <3.5 microg/L for all the phenolic compounds tested. The method was applied to seawater and depurated wastewater samples.     

Scale up of the mixer of a mixer-settler model used in a uranium solvent extraction process

Scale up relations were obtained for the mixer of a box type mixer-settler used in an uranium extraction process from chloridric leaches. Three box type mixers of different sizes and with the same geometry were used for batch and continuous-flow experiments. The correlations between the extraction rate and the specific power input,D/T ratio(=turbine diameter/mixer width) and residence time were experimentally determined. The results showed that the extraction rate increases with the power input at a constantD/T ratio equal to 1/3, remaining however, independent from the mixer size for a specific value of the power input. This behaviour was observed for power input values ranging from 100 to 750 W/m³.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Carbon fiber cylindrical microelectrode-based detector for the determination of antithyroid drugs

An amperometric flow-injection method for the determination of antithyroid drugs such as 6-methyl-2-thiouracil (MTU) using a carbon fiber cylindrical microelectrode-based detector is reported. A home-made flow-cell specially adapted for working with cylindrical microelectrodes ranging between 4 and 10 mm in length was used for this purpose. Methanol containing 0.05 mol l(-1) tetrabutylammonium perchlorate as the supporting electrolyte was employed, and a potential of +1.6 V was selected for the amperometric detection of MTU. No cleaning or electrode surface regeneration of the fiber was necessary during the whole working day. A limit of detection of 2.6x10(-7) mol l(-1) (37 mug MTU l(-1)) was achieved. The method was applied to the determination of MTU in spiked feed samples (peas and corn flour), at the 142 mug g(-1) level. The procedure involved the extraction of the drug in methanol, a clean-up step using Florisil cartridges and the use of the standard additions method. Recoveries of 81+/-6 and 85+/-8% were obtained for peas and corn flour, respectively.     

Quantitative analysis of bilobalide and ginkgolides from Ginkgo biloba leaves and Ginkgo products using (1)H-NMR

1H-NMR spectrometry was applied to the quantitative analysis of the bilobalide, ginkgolides A, B, and C in Ginkgo biloba leaves and six kinds of commercial Ginkgo products without any chromatographic purification. The experiment was performed by the analysis of each singlet H-12, which were well separated in the range of delta 6.0-7.0 in the (1)H-NMR spectrum. However, the H-12 protons of bilobalide and ginkgolides may have overlapped with H-6 or H-8 protons of the Ginkgo flavonoids. Therefore, the optimum (1)H-NMR solvent for the analysis of the compound was selected through the evaluation of solvent effects on the resolution of these signals from the compounds. Acetone-d(6)-benzene-d(6) (50 : 50) was found to be the best one among the solvents evaluated. The quantity of the compounds was calculated by the relative ratio of the intensity of each compound to the known amount of internal standard (25 microgram), phloroglucinol. This method allows rapid and simple quantitation of underivatized bilobalide and ginkgolides in 5 min without any pre-purification steps.     

A furan ring expansion approach to the synthesis of novel pyridazino-psoralen derivatives

A convenient preparation of the parent tetrahydrobenzodifuran 2 was developed from resorcinol. The oxidation of one or both furan rings of this key intermediate was accomplished with DDQ and the resulting benzodifuran was subsequently reacted with 3,6-dimethoxycarbonyl-1,2,4,5-tetrazine to afford the expected pyridazino-psoralen derivative in good yield. This simple method allowed the efficient preparation of a pyridazino-psoralen derivative with a formyl group at C-7, which was introduced by directed ortho-lithiation in the intermediate 2. An aminoalkyl side-chain was also introduced to the tetracyclic skeleton through the aldehyde functionality in a reductive amination process, which was accompanied by an unprecedented reduction of the pyridazine ring.     

Stereoselective synthesis of trans-2,3-disubstituted pyrrolidines via addition to N-acyliminium ions

An efficient and stereoselective synthesis of trans-2,3-disubstituted pyrrolidines is described. The intermolecular alkylation of racemic N-acyliminium ions generated in situ from the corresponding 3-substituted lactams proceeds stereoselectively and in high yield.     

Comparative EIS study of a paste electrode containing zinc powder in neutral and near neutral solutions

The corrosion and passivation of Zn powder particles dispersed in a paste electrode immersed in 0.5 M Na₂SO₄ and 5×10^–3 M Na₂HPO₄ solutions were studied mainly by electrochemical impedance spectroscopy. The role played by diffusion in the mechanism of anodic oxidation of zinc powder particles has been shown. It was demonstrated that the anodic reactionof Zn powder in neutral or near neutral media involves at least two adsorbed intermediates. By simulating the porous structure of the electrode, some information about porous nature of zinc electrode could be extracted. Electronic Publication