Feasibility study on buoyancy–weight ratios of a submerged floating tunnel prototype subjected to hydrodynamic loads

The research progress of a novel traffic solution,a submerged floating tunnel(SFT),is reviewed in terms of a study approach and loading scenario.Among existing publications,the buoyancy-weight ratio(BWR) is usually predefined.However,BWR is a critical structural parameter that tremendously affects the dynamic behaviour of not only the tunnel tube itself but also the cable system.In the context of a SFT prototype(SFTP) project in Qiandao Lake(Zhejiang Province,China),the importance of BWR is illustrated by finite element analysis and subsequently,an optimized BWR is proposed within a reasonable range in the present study.In the numerical model,structural damping is identified to be of importance.Rayleigh damping and the corresponding Rayleigh coefficients are attained through a sensitivity study,which shows that the adopted damping ratios are fairly suitable for SFTP.Lastly,the human sense of security is considered by quantifying the comfort index,which helps further optimize BWR in the SFTP structural parameter design.     

一阶最优性条件研究

本对由Botsko的关于多变量函数取极值的一阶导数检验条件定理^[1]进行了分析研究，给出了更实用而简捷的差别条件。最后，举出若干例子予以说明。     

Controlling quantum coherence of atom laser by light with strong strength

A new method for controlling the quantum coherence of atom laser by applying input light with strong strength is presented within the framework of quantum dynamical theory. Unlike the case of rotating wave approximation(RWA), we show that the non-classical properties, such as sub-Poisson distribution and quadrature squeezed effect, can appear in the output atom laser beam with time. By choosing suitable initial RF phase, a steady and brighter output of squeezed coherent atom laser is also available.     

磁各向异性色散介质散射的Pad啨时域有限差分方法分析

根据矩阵Pad啨逼近理论,把磁化色散介质的相对磁导率张量表示成以jω为自变量的矩阵函数形式,用/t代替jω后过渡到时域,再引入离散时域移位算子代替时间微分算子.进而导出磁化色散介质中的磁感应强度B和磁场强度H在离散时域的色散关系,并将其具体应用于旋磁介质,得到了这种磁化色散介质的Pad啨时域有限差分方法的递推表达式.作为验证,用这种方法计算了磁化铁氧体球的后向雷达散射截面,所得结果与文献结果一致.理论推导及算例表明,该方法是正确和有效的.     

工科物理实验课程改革与实践

针对21世纪实验教学的要求,介绍了开展工科物理实验教学体系与教学内容改革的经验。     

金属薄膜制备及物性测量系列实验

介绍了由模拟真空实验和“金属薄膜的制备”、“金属薄膜厚度的测量”、“金属薄膜电阻率的测量”,以及“金属薄膜生长过程的动态监测”等4个实验组成的金属薄膜制备与物性测量系列实验.这组实验与现代科学技术发展联系紧密,仪器设备可靠,操作简单,适合于普通物理实验阶段的研究性教学.     

改善光纤倒像器的对比度传递特性

光纤倒像器是一种特殊类型的光纤板，可将传递图像直接倒转180°并应用于像增强器。由于光纤倒像器的特殊结构，造成光纤随着距扭转轴心的距离增加，数值孔径和光通量逐渐下降。相对于光纤板，光纤倒像器在透过率和对比度传递特性上均有一定程度的下降。通过改进玻璃系统，在一定程度上降低芯皮玻璃间离子扩散和相互渗透的程度，可提高光纤倒像器的实际数值孔径；通过调节EMA吸收量，既能满足像增强器对光纤倒像器荧光屏透过率的要求，又能保证最大程度地吸收光纤中逸出的杂散光，提高对比度。选择合理的芯皮比，不仅可弥补因扭转拉伸造成的皮层厚度减薄，还可进一步增加皮层厚度，抑制光从光纤中逸出。通过以上改进，可改善光纤倒像器的对比度传递特性。     

多相体系中Ni-PMMA纳米复合材料的γ辐射制备

在多相体系中 ,运用γ射线辐射法 ,在常温常压下成功地一步合成了镍 聚甲基丙烯酸甲酯 (Ni PMMA)纳米复合材料 .XRD、TEM分析和IR光谱表明 ,在此实验条件下 ,镍离子和甲基丙烯酸甲酯已成功地被还原或聚合 ,镍粒子为面心立方 ,尺寸为 7.33nm .研究显示 ,用醋酸钠代替氢氧化钠或氨水作为碱性试剂 ,可以有效地控制体系的pH ,同时不影响单体的聚合 .