Crystallographic report: Bis{µ‐[O‐cyclopentyl(4‐methoxyphenyl)dithiophosphonato]1κ:S,2κ:S‐[O‐cyclopentyl(4‐methoxyphenyl)dithiophosphonato]‐1κ2S,S′}dicadmium(II)

The centrosymmetric title compound, [Cd₂{CH₃OC₆H₄P(OC₅H₉)S₂}₄], features an eight‐membered [? Cd? S? P? S? ]₂ ring owing to the presence of bridging dithiolate ligands. Tetrahedral coordination geometries for cadmium are completed by chelating ligands. Copyright © 2004 John Wiley & Sons, Ltd.     

Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.     

Approximation of transformation media-based reshaping action by genetic optimization

The aim of this paper is to study the laser-induced backside wet cleaning techniques for glass substrates. Two kinds of laser cleaning techniques are proposed in this study. The first involves applying an Nd:YAG laser to the backside of the substrate which is submerged in water. A metal plate is placed below the glass substrate. Most of the laser energy will be absorbed by the metal plate. The metal then vaporizes the water and generates a turbulent bubble flow. The bubble flow removes the alumina particles from the surface of the glass substrate. The second involves using a CO₂ laser to generate turbulent bubble flow to remove the particles. Both methods were successfully demonstrated for the removal of submicron particles of 0.5 μm in size. The phenomena of bubble generation and diffusion are presented in the paper. Because the laser is applied to the backside of the substrate, the damage due to the laser heat can be significantly reduced. The quality and efficient of the backside processing is better than those of the front side processing. The proposed techniques have great potential to provide an improved solution for glass cleaning.     

Synthesis of Chiral Calix[4]arene Derivative and Evaluation of its Recognition Properties

The article describes the synthesis and extraction properties of a new chiral calix[4]arene Schiff base ligand 5, which has been synthesized from 5,17-diformyl-25,27-bis-(4-nitrobenzyloxy)-26,28-dihidroxycalix[4]arene (4) by treatment with (S)-(-)-1-phenylethylamine. In this synthesis, it was thought to explore the role of chiral, as well as Schiff base sites in the recognition of targeted species ions (such as dichromate anions) as well as neutral/chiral molecules. At low pH, the ligand 5 is more effective for transferring the dichromate anions from an aqueous into a dichloromethane layer; may be due to the protonation of nitrogen atoms.

The extraction properties of ligand 5 towards the some selected α -amino acid methylesters are also reported. However, the ligand 5 did not display any selectivity towards the selected α-amino acid methylesters.     

A Bifunctional B,N-Based Asymmetric Catalytic Nitrostyrene-Michael Addition Acting through a 10-Membered Ring Cyclic Transition State

The B,N-bifunctional catalyst homoboroproline has been applied to a catalytic asymmetric nitroalkene-Michael addition to β-nitrostyrene analogues, showing broad substrate tolerance, high conversions and moderate to good asymmetric induction. The ability of homoboroproline to act as an efficient catalyst based on enamine-formation of the secondary amine, coupled with intramolecular Lewis-acid chelation of the nitro function, in a non-FLP manner, to effect efficient and enantioselective catalysis via a proposed large 10-membered ring transition state is remarkable and reinforced by theoretical calculations.     

Adsorption of acid dyes from aqueous solutions onto acid-activated bentonite

The adsorption of two dyes, namely, Acid Red 57 (AR57) and Acid Blue 294 (AB294), onto acid-activated bentonite in aqueous solution was studied in a batch system with respect to contact time, pH, and temperature. Acidic pH was favorable for the adsorption of these dyes. The surface characterization of acid-activated bentonite was performed using the FTIR technique. The pseudo-first-order and pseudo-second-order kinetic models and the intraparticle diffusion model were used to describe the kinetic data and the rate constants were evaluated. The dynamic data fitted the pseudo-second-order kinetic model well and also followed the intraparticle diffusion model up to 90 min, but diffusion is not the only rate controlling step. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The Freundlich model agrees very well with experimental data. The activation energies of adsorption were also evaluated for the adsorption of AR57 and AB294 onto activated bentonite.     

Dendrimer Templated Synthesis of Carbon Nanotube Supported PdAu Catalyst and its Application as Hydrogen Peroxide Sensor

At present, CNT supported catalysts were prepared by two different methods as NaBH₄ reduction and dendrimer templated NaBH₄ reduction method to observe the effect of preparation method on the sensitivity and activity of H₂O₂ reduction. Then, CNT supported Pd_xAu_y bimetallic nanocatalysts having various atomic ratio were synthesized via novel dendrimer templated NaBH₄ reduction method. The resulting materials were characterized employing XRD and TEM. Crystallite size of 10 %Pd_0.7Au_0.3/CNT_dendrimer was obtained from XRD 17.1 nm and mean particle size obtained from TEM is about 15 nm. Moreover, the electrochemical behavior of these catalysts was characterized by cyclic voltammetry (CV) and chronoamperometry (CA) techniques. Pd_xAu_y bimetallic nanocatalysts have excellent electrocatalytic properties and great potential for applications in electrochemical detection. The sensitivity and the limit of detection values for the prepared sensor with monometallic 10 % Pd/CNT_dendrimer catalysts are 219.78 μA mM^?1cm^?2 and 2.6 μM, respectively. However, the sensor constructed with 10 %Pd_0.7Au_0.3/CNT_dendrimer modified electrode has a very high sensitivity of 316.89 μA mM^?1 cm^?2 with a quick response time of 2 s and a wide linear range of 0.001–19.0 mM. In addition, the interference experiment indicated that the 10 % Pd_0.7Au_0.3/CNT_dendrimer nanoparticles have good selectivity toward H₂O₂.     

Structure–reactivity relationships of alkyl α‐hydroxymethacrylate derivatives

A series of alkyl α‐hydroxymethacrylate derivatives with various secondary functionalities (ether, ester, carbonate, and carbamate) and terminal groups (alkyl, cyano, oxetane, cyclic carbonate, phenyl and morpholine) were synthesized to investigate the effect of intermolecular interactions, H‐bonding, π–π interactions, and dipole moment on monomer reactivity. All of the monomers except one ester and one ether derivative are novel. The polymerization rates, determined by using photo‐DSC, showed the average trend (aromatic carbamate > hydroxyl > ester > carbonate ～ aliphatic carbamate ～ ether), with several exceptions due to the differences in terminal groups. There is a correlation between the chemical shift differences of the double bond carbons, the calculated dipole moments, and the reactivities only for nonhydrogen bonded monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Detecting organic vapors using a conductometric sensor prepared from Ardel®D-100 and graphite

The composites of graphite with Ardel^?D-100 which is a trademark of a polyester of bisphenol-A with terephthalic and isophthalic acid were used as a sensing material in a conductometric vapor sensor. The magnitudes of responses are increased in the order of benzene, isobutyl acetate, isoamyl acetate, ethyl benzene and chloro benzene. This suggests that Ardel^?D-100 can be used as a sensing material for chlorobenzene, ethyl benzene and isoamyl acetate. On the other hand, specific retention volumes of the sensed vapors on Ardel^?D-100 coated on graphite were determined by inverse gas chromatography at temperatures between 200 and 260 °C. The distribution coefficient, K _s of the vapors between stationary and mobile phases in the column was obtained. It was revealed for the first time that the logarithm of K _s of the solvents varies almost linearly with their responses based on conductometric resistance of the sensing polymer composite. Subsequently, the study suggests that gas chromatographic retention data can be used in prediction of the conductometric responses of a polymeric sensor to vapors. Correspondence: Ferdane Karaman, Department of Chemistry, Yildiz Technical University, 34220 Istanbul-Esenler, Turkey     

In situ PM‐IRRAS studies of organothiols and organosilane monolayers–ZnO interfaces at high water activities

In situ photoelastic‐modulated Fourier transform infrared reflection absorption spectroscopy has been applied for the investigation of interfacial stability of organothiol and organosilane monolayer films on nanocrystalline zinc oxide thin films. It has been shown that for octadecyltriethoxysilane films, exposure to high water activities results in physisorption of water in the cross‐linked film. This high water activity at the interface leads to a reversible wet de‐adhesion of the interfacial silanol groups from the ZnO surface. However, the organothiol seems to form a denser monolayer and a stable by S–Zn bond that is resistant to the competition with adsorbed water. The reversible attachment for cross‐linked organosilanol films has been demonstrated for the first time by means of an in situ spectroscopic method on model ZnO surfaces. Copyright © 2016 John Wiley & Sons, Ltd.