Winter transport of Chernobyl radionuclides from a montane catchment to an ice-covered lake.

The amounts of 137Cs and 90Sr have been determined in the inflows and outflows of the Norwegian sub-alpine lake, Ovre Heimdalsvatn, in March/April during the period of ice-cover, when discharge is extremely stable. The lake is situated in an area contaminated by Chernobyl fallout. The transported course particulate plant material has been collected in traps; the particles and colloids have been removed from water samples by cross-flow ultrafiltration. On the basis of radionuclide inputs and outputs, lake budget calculations have been made for 137Cs and 90Sr during the period of ice-cover. Daily transport of radionuclides is considerably less than that observed during the spring snowmelt period when discharges are high. Size distribution patterns of Cs and Sr observed during winter are compared with previously published data from the same lake during the spring spate. The retention of 137Cs is similar in winter and spring, but retention of 90Sr is greater in winter.     

DETECTION OF DNA-PSORALEN PHOTOADDUCTS in situ

Abstract— An immunological method, with the use of specific immune serum, has been developed for detection of 8-methoxypsoralen (8-MOP) photoadducts to DNA, formed in situ in cell nuclei, after combined treatment with 8MOP and UV-A irradiation (Zarçbska et al. , 1978). Lymphocytes fixed on slides or in suspension, and cryostat sections of different mammalian tissues, served as antigenic substrate, after treatment with 8-MOP and UV-A in vitro. Specific fluorescence in these substrates was detected in the nuclei after treatment with 30 ˜ 140 kJ/m² UV-A in the presence of 0.1-0.3 μg/cm² 8-MOP. PHA-stimulated-lymphocytes appeared to be the most sensitive substrate.
However, hairless mice treated with high doses of UV-A in vivo , 70 ˜ 360 kJ/m² did not reveal a specific fluorescence of epidermal nuclei, unless a high local concentration of 8-MOP was attained.
The apparent discrepancy in the level of photoadduct detection between the in vitro and in vivo treated specimens was explained by the low number of DNA-8-MOP-photoadducts formed in vivo under these experimental conditions. The relevance of these findings to the role of DNA-8-MOP-photoadducts formed during PUVA photochemotherapy is discussed.     

Determination of aluminium-26 using a low-level liquid scintillation spectrometer.

The lack of a suitable tracer has severely limited the use of radioisotope tracer experiments in environmental and biological studies on aluminium. The only aluminium radioisotope with a half-life greater than 10 min is the long-lived positron emitter 26Al (t1/2 7.2 x 10(5) years). The exposure of this nuclide and the difficulty in attaining sufficiently low determination limits with standard radioanalytical techniques have restricted its application as a radioactive tracer. The development of a simple method for the routine determination of 26Al using Cerenkov counting and a Quantalus 1220 low-level liquid scintillation spectrometer is reported. For a 300 min counting time, determination limits of about 60 mBq in water samples and 120 mBq in biological (fish gill) samples can be attained. With these levels of determination, the use of 26Al as a tracer is a viable technique for the study of aluminium in environmental and biological systems.     

ON QUOTIENTS OF BRAID GROUPS

ABSTRACT.

Let G be the group ?[t, t ^?1] x ?. By studying the action of the braid group B_n on the set Gⁿ , we obtain representations of B_n into a wreath product of the symmetric group and the general linear group over ?[t, t ^?1]. This in particular recovers the Burau representation of the braid group. Furthermore, some quotients of the braid group are obtained by using the representations found.     

Synthesis and structural studies of 1,1'-bis-amino-functionalized ferrocenes, ferrocene salts, and ferrocenium salts

Having isolated and characterized a series of sodium cyclopentadienide salts, we have synthesized a number of 1,1'-bis-amino-functionalized ferrocenes, 1,1'-bis-amino-functionalized ferrocene salts, and 1,1'-bis-amino-functionalized ferrocenium salts. Among these are the first crystallographically characterized examples of cyclopentadienyl units containing (piperidin-N-ylethyl)- and (pyrid-2-ylmethyl)cyclopentadienyl side chains. In the cases of some of the ferrocenes, ferrocene salts, and ferrocenium salts, there are some interesting structural features in the solid state. These include C-H...N and C-H...pi cloud interactions as well as N-H...O and N-H...F hydrogen bonds.     

Characterization of partially transesterified poly(beta-hydroxyalkanoate)s using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was used for the characterization of a partially transesterified poly(beta-hydroxyalkanoate), PHA, polymer produced by the bacterial strain Alcaligenes eutrophus using saponified vegetable oils as the sole carbon sources. The transesterification was carried out separately under acidic and basic conditions to obtain PHA oligomers weighing less than 10 kDa. The intact oligomers were detected in their cationized [M + Na](+) and [M + K](+) forms by MALDI-TOFMS. A composition analysis, using the MALDI-TOF spectra, indicate that the oligomers obtained via acid catalysis were terminated with a methyl 3-hydroxybutyrate end group, and those obtained by base catalysis had a methyl crotonate (olefinic) termination. In addition to HB (hydroxy butyrate), the oligomers were found to contain a small percentage of HV (hydroxy valerate). This was independently confirmed using gas chromatography/mass spectrometry (GC/MS). In comparison, the analysis of a commercial PHA polymer, transesterified under identical conditions, only showed the presence of HB, i.e. a pure PHB homopolymer. Copyright 1999 John Wiley & Sons, Ltd.     

More efficient Brownian dynamics algorithms

We examine the relative efficiencies of three- algorithms for performing Brownian Dynamics simulations without many-body hydrodynamics. We compare the conventional Brownian Dynamics algorithm of Ermak (CBD), Smart Monte Carlo (SMC) which incorporates Boltzmann sampling into essentially a CBD procedure, and the Stochastic Runge Kutta (SRK) method. We show, using the repulsive potential φ(r) = ε(σ/r) ⁿ , where n = 36 and 72, that the SRK algorithm gives the most accurate short-time dynamics for the mean-square displacements. The SRK algorithm static and dynamical properties converge better with a reducing time step to the exact values, than those generated by the CBD algorithm; giving efficiency gains typically of a factor of 3–4. Both CBD and SMC have the incorrect sign for the first correction term to the mean square displacement in a time step, whereas the SRK algorithm gives essentially the exact solution to order Δt ², where Δt is the simulation time step. In fact, these correction terms are almost equal and opposite in sign. Expressions for these terms were derived in terms of the average interaction energy per particle. The force, shear and bulk stress autocorrelation functions were calculated. The average energy per particle and time correlation functions at short time have values in excess of the exact values, while the corresponding quantities for SRK are below this. This difference in behaviour can be traced back to the extent of compliance of the particle trajectories with the exact expansion of the Smoluchowski equation. The accuracy, at a given value of the time step, of the stochastic algorithms can significantly depend on the form of the interaction potential between particles. It is also demonstrated that the long time limits of various correlation functions are fairly insensitive to a particular scheme (SRK or CBD) used in the simulations. All the correlation functions have a stretched exponential region at intermediate to long times, and the values of the exponents on density and force law steepness have been determined.     

Use of an aluminium-26 tracer to study the deposition of aluminium species on fish gills following mixing of limed and acidic waters.

Results are presented from an experiment designed to investigate the deposition of Al species onto fish gills following the mixing of limed and acidic natural waters. The natural waters were labelled with 26Al and the distribution between high and low molecular weight forms was determined by ultrafiltration of water samples. In labelled acidic waters, the 26Al was present predominantly in low molecular weight forms, whereas in labelled limed waters the major fraction of 26Al was present in a high molecular weight form. In mixing experiments, 26Al was only detectable on fish gills when the 26Al was initially present in a low molecular weight form (i.e., in labelled acidic waters). Aluminium-26 was not detected on the gills of fish exposed to labelled limed waters. These results support the hypothesis that Al on fish gills arises from polymerization of low molecular weight species and that, within mixing zones, the high molecular weight species do not play a significant role in the precipitation of Al onto the gill surface.