Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

Contactless conductivity detection of synthetic polymers in non-aqueous size-exclusion electrokinetic chromatography

A capacitively coupled contactless conductivity detection (CCD) system has been applied for the detection of neutral synthetic polymers in capillary size-exclusion electrokinetic chromatography (SEEC). Polystyrene standards, that were used as a model compounds, were separated on a capillary column packed with porous 10 microm silica particles with an electrokinetically driven mobile phase, and detected by CCD and UV detection simultaneously. Mass-calibration curves for polystyrene were constructed. Satisfactory results were obtained for the linearity, the run-to-run repeatability (<0.2% for the relative retention and <4% for the peak area) and the robustness of the detector. One of the major issues in this preliminary study was to investigate the origin of the peaks observed for the polystyrene standards. The effect of the molar mass of the polystyrenes on the sensitivity was small. Therefore, the signals obtained could not be explained as the result of an increased viscosity and a decreased solution conductivity of the solute zone. An alternative hypothesis is suggested, and recommendations for further research are given.     

DETECTION OF DNA-PSORALEN PHOTOADDUCTS in situ

Abstract— An immunological method, with the use of specific immune serum, has been developed for detection of 8-methoxypsoralen (8-MOP) photoadducts to DNA, formed in situ in cell nuclei, after combined treatment with 8MOP and UV-A irradiation (Zarçbska et al. , 1978). Lymphocytes fixed on slides or in suspension, and cryostat sections of different mammalian tissues, served as antigenic substrate, after treatment with 8-MOP and UV-A in vitro. Specific fluorescence in these substrates was detected in the nuclei after treatment with 30 ˜ 140 kJ/m² UV-A in the presence of 0.1-0.3 μg/cm² 8-MOP. PHA-stimulated-lymphocytes appeared to be the most sensitive substrate.
However, hairless mice treated with high doses of UV-A in vivo , 70 ˜ 360 kJ/m² did not reveal a specific fluorescence of epidermal nuclei, unless a high local concentration of 8-MOP was attained.
The apparent discrepancy in the level of photoadduct detection between the in vitro and in vivo treated specimens was explained by the low number of DNA-8-MOP-photoadducts formed in vivo under these experimental conditions. The relevance of these findings to the role of DNA-8-MOP-photoadducts formed during PUVA photochemotherapy is discussed.     

ON QUOTIENTS OF BRAID GROUPS

ABSTRACT.

Let G be the group ?[t, t ^?1] x ?. By studying the action of the braid group B_n on the set Gⁿ , we obtain representations of B_n into a wreath product of the symmetric group and the general linear group over ?[t, t ^?1]. This in particular recovers the Burau representation of the braid group. Furthermore, some quotients of the braid group are obtained by using the representations found.     

More efficient Brownian dynamics algorithms

We examine the relative efficiencies of three- algorithms for performing Brownian Dynamics simulations without many-body hydrodynamics. We compare the conventional Brownian Dynamics algorithm of Ermak (CBD), Smart Monte Carlo (SMC) which incorporates Boltzmann sampling into essentially a CBD procedure, and the Stochastic Runge Kutta (SRK) method. We show, using the repulsive potential φ(r) = ε(σ/r) ⁿ , where n = 36 and 72, that the SRK algorithm gives the most accurate short-time dynamics for the mean-square displacements. The SRK algorithm static and dynamical properties converge better with a reducing time step to the exact values, than those generated by the CBD algorithm; giving efficiency gains typically of a factor of 3–4. Both CBD and SMC have the incorrect sign for the first correction term to the mean square displacement in a time step, whereas the SRK algorithm gives essentially the exact solution to order Δt ², where Δt is the simulation time step. In fact, these correction terms are almost equal and opposite in sign. Expressions for these terms were derived in terms of the average interaction energy per particle. The force, shear and bulk stress autocorrelation functions were calculated. The average energy per particle and time correlation functions at short time have values in excess of the exact values, while the corresponding quantities for SRK are below this. This difference in behaviour can be traced back to the extent of compliance of the particle trajectories with the exact expansion of the Smoluchowski equation. The accuracy, at a given value of the time step, of the stochastic algorithms can significantly depend on the form of the interaction potential between particles. It is also demonstrated that the long time limits of various correlation functions are fairly insensitive to a particular scheme (SRK or CBD) used in the simulations. All the correlation functions have a stretched exponential region at intermediate to long times, and the values of the exponents on density and force law steepness have been determined.     

Characterization of partially transesterified poly(beta-hydroxyalkanoate)s using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was used for the characterization of a partially transesterified poly(beta-hydroxyalkanoate), PHA, polymer produced by the bacterial strain Alcaligenes eutrophus using saponified vegetable oils as the sole carbon sources. The transesterification was carried out separately under acidic and basic conditions to obtain PHA oligomers weighing less than 10 kDa. The intact oligomers were detected in their cationized [M + Na](+) and [M + K](+) forms by MALDI-TOFMS. A composition analysis, using the MALDI-TOF spectra, indicate that the oligomers obtained via acid catalysis were terminated with a methyl 3-hydroxybutyrate end group, and those obtained by base catalysis had a methyl crotonate (olefinic) termination. In addition to HB (hydroxy butyrate), the oligomers were found to contain a small percentage of HV (hydroxy valerate). This was independently confirmed using gas chromatography/mass spectrometry (GC/MS). In comparison, the analysis of a commercial PHA polymer, transesterified under identical conditions, only showed the presence of HB, i.e. a pure PHB homopolymer. Copyright 1999 John Wiley & Sons, Ltd.     

Characterization of glycerin-based polyols by capillary electrophoresis

Methods based on capillary electrophoresis (CE) have been developed to obtain the molar mass distribution (MMD) of glycerin-based polyols and details on the presence of mono- and difunctional byproducts in technical samples. Prior to the analyses the hydroxy end-groups of the trifunctional polyols were converted to chargeable and UV-active moieties with phthalic anhydride (PhAH) as the derivatization reagent. With a method of capillary zone electrophoresis (CZE) samples of glycerin-based polyols with average molar masses up to 6000 were separated according to their charge-to-size ratio. The separations were carried out with a buffer solution containing 50% (v/v) acetonitrile and 10 mM sodium tetraborate, and for detection UV absorption at 220 nm was measured. An approximately linear relation between the reciprocal of the effective mobilities and the degree of polymerisation of the glycerin-based polyols was found. Therefore, the proposed CZE system could be used to determine the degree of polymerisation and polydispersity of technical glycerin-based polyol samples. The effect of the presence of sodium dodecyl sulfate (SDS) in the buffer solution on the CE separation of linear polyethylene glycols (PEGs), polypropylene glycols (PPGs) and ethylene oxide-propylene oxide (EO-PO) copolymers with different molar masses was investigated. The interaction between the charged polymer derivatives and SDS ions in solution increased strongly with the degree of polymerisation and the amount PO in the chain of the polymeric compounds. This behaviour made it possible to invert the migration order of EO-PO containing polymers of different size. With a background electrolyte (BGE) composition of 10mM SDS and 25% (v/v) acetonitrile in borate buffer mono- and difunctional byproducts were separated from the main glycerin-based polyols based on their number of end-groups. Accurate quantities for the mono- and difunctional impurities in technical glycerin-based polyol products were determined.     

漫谈有效数字和计算器

介绍了有效数字的概念及其计算规则,介绍了计算器的一般特性及使用技巧,并给出计算实例.