Studies on the preparation and characterization of monodisperse polystyrene latices V.: The preparation of cationic latices

Summary Methods are described for the preparation of monodisperse polystyrene latices using as initiators, 2-azo-bis-(2-methylpropamidinium) dichloride and 2-azo-bis-(2-isopropyliminazolium) dichloride. The preparations were carried out in the absence of any added surface active agents. The effect on particle size of varying initiator concentration, monomer concentration, temperature and ionic strength was examined and the conditions defined for preparing monodisperse latices, with particles in the size range 0.2 to 1m. Electrophoretic measurements confirmed that the latex particles were cationic. The evidence obtained suggested that the charged sites on the particle surface were amidinium groupings. The latices were not stable at pH values greater than 11 and prolonged heating at 90° also caused coagulation.

---

Zusammenfassung Es wurden Methoden zur Darstellung monodisperser Polystyrol-Latices unter Verwendung von 2-azo-bis-(2-methylpropamidinium)-dichlorid und 2-azo-bis-(2-isopropyliminazolium)-dichlorid als Initiator beschrieben. Die Darstellung erfolgte in Abwesenheit von grenzflächenaktiven Verbindungen. Der Einfluß unterschiedlicher Initiator- und Monomerkonzentrationen, der Temperatur und der lonenstärke auf die Teilchengröße wurde untersucht und die Bedingungen festgelegt, unter denen monodisperse Latices mit Teilchen im Größenbereich von 0,2-1m erhalten werden. Elektrophoretische Messungen bestätigten, daß die Latexteilchen kationisch sind. Die Ladungen auf der Teilchenoberfläche sind Amidiniumgruppen. Die Latices waren bei pH-Werten über 11 nicht stabil; längeres Erhitzen auf 90° führte ebenfalls zur Koagulation.

---

---

With 6 figures and 9 tables     

The stability of silver iodide sols in the presence of polyacrylic acids of various molecular weights

Summary The effect of a series of polyacrylic acids, ranging in molecular weight from 1.67×10⁴ to 2.36×10⁶, on the stability of positively charged silver iodide particles has been examined. Flocculation of the sol occurred at a well defined concentration of polyacrylic acid,c _f , and a further increase in concentration of the polyelectrolyte caused restabilization of the sol. Over the range examinedc _f appeared to be related to the viscosity average molecular weight of the acid,M _v , by an equation of the form,c _f =a ·M _v ^{– b} wherea andb are constants.     

Small angle neutron scattering studies on nonaqueous dispersions of calcium carbonate Part 2. Determination of the form factor for concentric spheres

Colloidal dispersions of calcium carbonate, stabilised primarily by a surface active agent, in both toluene and dodecane have been examined by small angle neutron scattering. A model has been developed to simulate the scattering behaviour of the particles and is based on the idea of a concentric sphere with a homogeneous layer of adsorbed material surrounding a core particle. Computations based on the model show a wide variation of scattering behaviour with variation of the coherent scattering length of the dispersion medium. These predictions were confirmed by experiment. A method is described for analysis of the experimental data which leads to a determination of the thickness of the adsorbed layer, the radius of the core particle and the standard deviation of core particle radius.     

Nonionic latices in aqueous media part 1. Preparation and characterization of polystyrene latices

A series of non-ionic polystyrene latices in aqueous media containing particles with a narrow size distribution have been prepared using a nonyl phenol poly(ehylene glycol) condensate as the surfactant, methoxy poly(ethylene glycol methacrylate) as the comonomer/stabilizer, and ascorbic acid/hydrogen peroxide as the initiator system. As a control synthesis for comparison with the above latex, a charge stabilized polystyrene latex was prepared, using an anionic surfactant and potassium persulphate as the initiator. Latices employing a combination of charge plus steric stabilization mechanisms were also prepared, in order to investigate the effect of the non-ionic surfactant and the comonomer/stabilizer. The particle size of the latices was measured by transmission electron microscopy, the surface charge density by conductimetric titration and the glass transition temperature of the polymer by differential scanning calorimetry. The latex prepared using non-ionic ingredients, showed no titratable charge and exhibited a profound lowering of the glass transition temperature, with respect to the charge stabilized latex. On the basis of these results, schematic models for the polymerization mechanism and the morphology of the latex particles are proposed.     

Flocculation of silver iodide sols by hydrolysed cations in the presence of a non-ionic surface active agent

Summary Previous studies have indicated that non-ionic surface active agents, such as n-dodecylhexaoxyethylene glycol monoether, confer considerable protection on silver iodide sols to flocculation by inorganic cations. In the present study the effects of hydrolysis of the flocculating cations, lanthanum, aluminium and thorium have been examined. It was found that with the hydrolysed cations the protective action of the non-ionic surface active agent was considerably diminished. It was deduced that the hydrolysed species are more strongly adsorbed than the nonionic surface active agent and either displace the latter from the surface or form species which are large enough to cause flocculation by interparticle bridging.

---

Zusammenfassung Vorausgehende Untersuchungen haben gezeigt, daß nichtionische oberflächenaktive Substanzen wie n-Dodecylhexaoxyäthylen-glykol-monoäther beträchtliche Schutzwirkung Silberjodidsolen gegenüber Flokkung durch anorganische Kationen verleihen. In der vorliegenden Untersuchung wird die Wirkung der Hydrolyse flockender Kationen, Lanthan, Aluminium und Thorium, geprüft. Es wurde gefunden, daß durch die hydrolisierten Kationen die Schutzwirkung der nichtionischen oberflächenaktiven Substanz beträchtlich vermindert wird. Daraus ist zu schließen, daß die hydrolisierte Ionenart stärker als das nichtoberflächenaktive Agens adsorbiert wird und deshalb das letztere von der Oberfläche entfernt wird oder genügend große interpartikuläre Brücken, bildet, um Flockung zu verursachen.

---

---

With 6 figures and 1 table     

Stabilit?t und Instabilit?t in dispersen Systemen

Ohne Zusammenfassung     

Studies on the preparation and characterization of monodisperse polystyrene latices. VI. Preparation of zwitterionic latices

The preparation of zwitterionic latex particles is reported by using a mixed anionic and cationic initiator system without requiring surface-active agents. Isoelectric points were found from microelectrophoresis experiments and were in the pH range of 3.5-5. Close to the isoelectric point, the latices coagulated as expected, and good stability was achieved outside this narrow range. This range of stability was in good agreement with predictions from current theory. Redispersion after coagulation was found to be difficult as was expected for a hydrophobic colloid. The electrokinetic behavior did not result in the maximum in zeta potential at an electrolyte concentration of 1 mM unlike the situation for other hydrophobic polystyrene latex particles, and hence these systems may be even better models for other colloidal studies.     

Giant colloidal crystals of fluorine-containing polymer spheres in exhaustively deionized aqueous suspensions and in the presence of sodium chloride

 Gigantic colloidal single crystals (2–6 mm) are formed for fluorine-containing polymer spheres (120–210 nm in diameter) in exhaustively deionized aqueous suspensions. The spheres used are poly(tetrafluoroethylene) (PTFEA and PTFEB), copolymer of tetrafluoroethylene and perfluorovinylether (PFA) and copolymer of tetrafluoroethylene and perfluoropropylene (PTP). The phase diagrams of these spheres are obtained in the deionized suspensions and also in the presence of sodium chloride for PFA. The critical sphere concentrations of crystal melting (φ _c) for these spheres are around 0.0006 in volume fraction, which are close to, but slightly larger than, those of monodispersed polystyrene spheres (φ _c ≈ 0.00015) and colloidal silica spheres(φ _c = 0.0002–0.0004) reported previously. The crystals are largest when the sphere concentrations are a bit higher than the φ _c value and their size decreases as the sphere concentration increases. Reflection spectra are taken in sedimentation equilibrium as a function of the height from the bottom of the suspension. The static elastic modulus is estimated to be 10.8 and 28.7 Pa for PTFEA and PTP spheres at the sphere concentrations 0.00325 and 0.00322 in volume fraction, respectively. Received: 27 October 1999 Accepted in revised form: 16 November 1999