Direct and simultaneous voltammetric analysis of heavy metals in tap water samples at Assiut city: an approach to improve the analysis time for nickel and cobalt determination at mercury film electrode

Tap water samples (Assiut city, lie in the middle north of upper Egypt, approx. 370 km from Cairo, January-March, 2002) were taken from the eight sampling sites of different locations at Assiut city. The samples are analyzed to determine the total content of cadmium, copper, lead and zinc by differential pulse anodic stripping voltammetry (DPASV) while nickel and cobalt are determined by a new simple differential pulse adsorptive stripping voltammetry (DPAdSV), using dimethylglyoxime (DMG) as the complexing agent. This method uses sodium sulfite as the supporting electrolyte, which facilitates the removal of oxygen interference without the traditional necessity of purging with inert gas. The effect of various parameters was studied using DPASV (for Cd, Pb, Cu and Zn) and AdSV (for Ni and Co) methods. Subsequently, under the so found experimental conditions, the stability of calibration curves and the detection limits (μg/l) have been determined. The data achieved (for all metals utility) are comparable to those measured by the graphite furnace atomic absorption spectrophotometric (GF-AAS) method. The effects of the interferences between these metal ions have been investigated. Moreover, the effect of storage was discussed and the obtained results were compared favorably with standard official methods. Statistical analysis of the database exhibits applicability and the accuracy of the techniques. The results obtained from the two techniques (Voltammetry and GF-AAS) are in very good agreements in the most tap water samples.     

In situ assembled ZIF superstructures via an emulsion-free soft-templating approach

Assembling well-defined MOF superstructures remains challenging as it requires easily removable hard templates or readily available immiscible solutions for an emulsion-based soft-template approach. In this work, a single-step emulsion-free soft templating approach is reported to spontaneously prepare hollow ZIF-8 and ZIF-67 colloidosomes with no further purification. These superstructures can load different enzymes regardless of the size and charge with a high encapsulation efficiency of 99%. We envisage that this work will expand the repertoires of MOF superstructures by the judicious selection of precursors and the reaction medium.

An emulsion-free approach for the preparation of hollow ZIF-8 superstructures in a single step is established based on metal sulfate hydrates in methanol.     

Growth properties of the q-Dunkl transform in the space $$L^{p}_{q,\alpha }({\mathbb {R}}_{q},|x|^{2\alpha +1}d_{q}x)$$ L q , α p ( R q , | x | 2 α + 1 d q x )

The Ramanujan Journal - Our aim in this work is to prove an analogue of Titchmarsh’s theorem [19, Theorem 84] and Younis’s theorem [20, Theorem 3.3] on the image under the q-Dunkl...     

Synthesis of thienothiazocinoisoindolediones and thienothiazinoisoindolones from mercaptothiophenes and chloromethylphthalimide

2-Thienylthiomethylphthalimides 3a,b were synthesized by action of Chloromethylphthalimide on 2-or 3-mercaptothiophene. Reduction of 3a,b and Wittig reaction using carbethoxycarbonyltriphenyl-phosphorane gave the corresponding acetic acids 5a,b which cyclized under Friedel and Crafts conditions to lead the thienothiazocinoisoindolediones 6a,b. Thienothiazinoisoindolones 7a,b were obtained from hydroxyisoindolones derivatives 4a,b in acid conditions via an acyliminium ion.     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

Voltammetric determination of azithromycin at the carbon paste electrode

Azithromycin (AZ) is the first member of a class of macrolide azalides antibiotics called azolides. A simple and selective square-wave voltammetric (SWV) method has been developed for the determination of azithromycin in pure form, in pharmaceutical preparation and in biological samples. Determination of azithromycin was accomplished with hand-make carbon paste electrode (CPE) in oxidative screen mode. The counter and reference electrodes were a Pt wire and a Ag/AgCl, respectively. Various parameters that can influence the peak signal (effect of buffer, ionic strength, accumulation time, pH and the composition of the paste) have been scrutinized. The best results were obtained in acetonitrile—aqueous 1 M sodium acetate-acetic acid buffer (pH 4.6) containing 0.1 M KCl (1:9; v/v) using a 15% paraffin oil CPE. The limits of detection and quantification of the pure drug are 0.463 and 1.544 ppb (with the correlation coefficient, r=0.9785and the standard deviation, S.D.=0.1 (n=5), for the accumulation time of 60 s), respectively. The method was successfully applied to the determination of the drug in urine and two forms of pharmaceutical formulations. Recoveries were 99.2—100.5% with S.D.=0.1—and 0.8% (n=5).     

The Intestinal and Biliary Metabolites of Ibuprofen in the Rat with Experimental Hyperglycemia

Hyperglycemia is reported to be associated with oxidative stress. It can result in changes in the activities of drug-metabolizing enzymes and membrane-integrated transporters, which can modify the fate of drugs and other xenobiotics; furthermore, it can result in the formation of non-enzyme catalyzed oxidative metabolites. The present work aimed to investigate how experimental hyperglycemia affects the intestinal and biliary appearance of the oxidative and Phase II metabolites of ibuprofen in rats. In vivo studies were performed by luminal perfusion of 250 μM racemic ibuprofen solution in control and streptozotocin-treated (hyperglycemic) rats. Analysis of the collected intestinal perfusate and bile samples was performed by HPLC-UV and HPLC-MS. No oxidative metabolites could be detected in the perfusate samples. The biliary appearance of ibuprofen, 2-hydroxyibuprofen, ibuprofen glucuronide, hydroxylated ibuprofen glucuronide, and ibuprofen taurate was depressed in the hyperglycemic animals. However, no specific non-enzymatic (hydroxyl radical initiated) hydroxylation product could be detected. Instead, the depression of biliary excretion of ibuprofen and ibuprofen metabolites turned out to be the indicative marker of hyperglycemia. The observed changes impact the pharmacokinetics of drugs administered in hyperglycemic individuals.     

Fundamental solution of generalized thermo-viscoelasticity using the finite element method

The present paper is aimed at an investigation of the temperature, displacement, and stress in a viscoelastic half space of Kelven–Voigt type. The formulation is applied according to three theories of generalized thermoelasticity: Lord–Shulman with one relaxation time, Green–Lindsay with two relaxation times, as well as the coupled theory. The nondimensional governing equations are solved by the finite element method. Numerical results for the temperature distribution, displacement, and thermal stress are represented graphically. Comparisons are made with the results predicted by the CD, L-S, and G-L theories in the presence and absence of the viscoelastic relaxation time.     

Phenyliodine(III) Diacetate/I2-Mediated Domino Approach for Pyrrolo[1,4]Thiazines and 1,4-Thiazines by a One-Pot Morin Rearrangement of N,S-Acetals

An efficient domino transformation using a phenyliodine(III) diacetate (PIDA)/I₂ combination towards Morin 1,4-thiazine compounds has been developed starting from N,S-acetals. The latter leads to “one-step” regioselective methylene insertion without the need for traditional sulfoxide intermediates in good yields. The reaction involves easily accessible N,S-acetals obtained from cost-effective basic ketones and cysteamine as starting materials. This process ultimately leads to 1,4-thiazines related to natural product and fused derivatives necessary for further QSAR study.