Relation between drug-induced taste disorder and chelating behavior with zinc ion; statistical approach to the drug-induced taste disorder, part II

There are many reports that the drug-induced taste disorder is ascribable to the chelate reaction of a drug with zinc ion and the following zinc deficiency. As a quantitative measure of the chelating ability of drugs with zinc ions, the chelating ability was estimated from the electrode potential change of the Zn2+/Zn(Hg) system during the addition of a drug. The electrode potential was measured in a water-N,N-dimethylformamide mixed solution and in an aqueous solution depending on the solubility of the drugs. The observed electrode potential change showed a positive correlation to the frequency of the drug-induced taste disorder that was supplied from the manufacturer of the original drug. The regression analysis was carried out assuming that the frequency of the taste disorder and the electrode potential change was linear. The F-values, p-values, and R2-values were 4.29, 0.13, 0.589, and 4.15, 0.13, 0.580, respectively. The positive correlation between the drug-induced taste disorder and the electrode potential change appeared evident if the uncertainty in the frequency of the taste disorder was taken into consideration. Thus the assumption of the zinc ion chelating mechanism on the drug-induced disorder was also evident except for cisplatin. The frequency of the drug-induced taste disorder of bezafibrate was estimated to be 0.4--0.5 from the regression analysis.     

Laser ablation synthesis of monodispersed magnetic alloy nanoparticles

Monodispersed CoPt alloy nanoparticles were synthesized by a pulsed laser ablation (PLA) technique coupled with a low-pressure operating differential mobility analyzer (LP-DMA). The CoPt alloy nanoparticles were generated by laser ablating a solid Co–Pt target. In CoPt alloy nanoparticles synthesized from a target with a Co composition of 75 at%, the nanoparticle surfaces were covered by an oxide layer and exhibited a core-shell structure. In contrast, no shell was observed in particles generated from a target with a Co:Pt ratio of 50:50 at%. According to an EDX analysis, the compositions of the individual nanoparticles were almost the same as that of the target material. Finally, the magnetic hysteresis loops of the CoPt alloy nanoparticles exhibited ferromagnetism.     

Guest-responsive intramolecular charge transfer of viologen-crown ether conjugate

Viologen-benzocrown ether conjugate (1) was prepared, in which a phenyl unit in benzocrown ether was incorporated into the nitrogen atom of a bypiridinium unit through a sigma bond. 1 showed a yellow color associated with an intramolecular charge transfer (CT) that responds to alkali and alkaline earth metal ions, especially to Ca²⁺.     

Tumor affinity and DNA interactions of 57Co-bleomycin (author's transl)

Cobalt-57-bleomycin (BLM) has been proven to be the most stable and useful tumor-diagnostic agent among several radiolabelled BLMs. However, the considerably long half life of 57Co causes troubles in handling and preclude its extensive uses. In our previous work, BLM was proved to form two geometrical isomers, in chelating with Co. In this paper, we compared the tumor affinity of two isomers, to make an improvement of this drug's merit. We investigated biodistribution in tumor-bearing mice and DNA binding properties by fluorescence quenching technique and DNA melting study. A comparison of the data obtained suggests that isomerism affects the tumor affinity of the drug. Both tumor accumulation in tumor-bearing mice and stability of DNA binding of type I isomer were higher than those of type II. If a certain suitable radionuclide is inserted into cold Co-BLM type I isomer, this agent will be a greatly useful tumor-imaging radiopharmaceutical.     

LCAO MO SCFπ-electron calculations on the magnetic circular dichroism of porphin,protoporphyrin, and porphyrin a

The transition energies, the oscillator strengths, and the A/D values of porphin, protoporphyrin, and porphyrin a were calculated within the framework of the Pariser -Parr-Pople approximation. The calculated values are in reasonable agreement with the experimental data obtained from the absorption and magnetic circular dichroism spectra of metal porphin, low-spin ferrous protoheme, and low-spin ferrous heme a. The magnetic circular dichroism of the Q and Soret bands in the heme a and the protoheme was analysed in terms of an “apparent” A term which originates from the magnetic mixing between the components of the nearly degenerate excited state.     

Determination of gallium in biological materials by electrothermal atomic absorption spectrometry

In this determination of gallium, the condition of the graphite tubes influences the peak height. Common acids and salts seriously affect the results, but in the presence of EDTA, interferences of nitric and hydrochloric acids are suppressed completely, and interferences of phosphoric acid and some salts are suppressed partly. To compensate for the effects, a standard addition procedure is proposed, and is applied to healthy and tumor.bearing mice. A linear calibration is obtained for 0.12–12 ng Ga in 50-μl aliquots. The method is applied to tissues and body fluids with good recovery and precision.     

Magnetic properties of monodispersed Ni/NiO core-shell nanoparticles

We have recently developed a method to fabricate monodispersed Ni/NiO core-shell nanoparticles by pulsed laser ablation. In this report, the size-dependent magnetic properties of monodispersed Ni/NiO core-shell nanoparticles were investigated. These nanoparticles were formed in two steps. The first was to fabricate a series of monodispersed Ni nanoparticles of 5 to 20 nm in diameter using a combination of laser ablation and size classification by a low-pressure differential mobility analyzer (DMA). The second step was to oxidize the surfaces of the Ni particles in situ to form core-shell structures. A superconducting quantum interference device (SQUID) magnetometer was used to measure the magnetic properties of nanostructured films prepared by depositing the nanoparticles at room temperature. Ferromagnetism was observed in the magnetic hysteresis loop of the nanostructured films composed of core-shell nanoparticles with core diameters smaller than the superparamagnetic limit, which suggests the spin of Ni core was weakly exchange coupled with antiferromagnetic NiO shell. In contrast, smaller nanoparticles with core diameters of 3.0 nm exhibited superparamagnetism. The drastic change in the hysteresis loops between field-deposited and zero-field-deposited samples was attributable to the strong anisotropy that developed during the magnetic-field-assisted nanostructuring process.     

Collision energy transfer in collision of NH(4) (+)(NH(3))(n-1) (n=3-9) with ND(3)

An incorporation of ND(3) into protonated ammonia cluster ions NH(4)(+)(NH(3))(n-1) (n=3-9), together with a dissociation of the cluster ions, was observed in the collision of the cluster with ND(3) at collision energies ranging from 0.04 to 1.4 eV in the center-of-mass frame. The branching fractions of the cluster ion species produced in the reactions were obtained as a function of the collision energy. The branching fractions of the incorporation products were successfully explained in terms of the Rice-Ramsperger-Kassel (RRK) theory at collision energies lower than the binding energy of the cluster ion. In addition, the internal energy distributions of the parent cluster ions were determined, and found to be in good agreement with those predicted using the evaporative ensemble model. In incorporations at collision energies lower than the binding energy of the cluster ion, all of the collision energy was transferred to the internal energy of the cluster ions; subsequently, an evaporation of ammonia molecules occurred in an equilibrium process after a complete energy redistribution in the clusters. In contrast, at collision energies higher than the binding energy of the cluster ion, a release of an ammonia molecule from the incorporation products occurred in a nonequilibrium process. The transition from the complex mode to the direct mode in the incorporation was observed at collision energies approximately equal to the binding energy. On the other hand, the collision energy dependence of the cross sections for the dissociation and for a nonreactive collision were estimated by a RRK simulation in which the collision energy transfer was interpreted by using the classical hard-sphere collision model. A relationship between reactivity and reaction modes in the collision of NH(4)(+)(NH(3))(4) with ND(3) is discussed via a comparison of the experimental results with the RRK simulation.     

An efficient approach of unsteady flamelet modeling of a cross-flow-jet combustion system using LES

Steady flamelet models have been widely used in turbulent combustion simulations because of their simplicity, efficiency, yet physics-based nature. They are, however, unable to handle slow chemical and physical processes such as pollutant formation. Unsteady flamelet models have been shown to be able to provide accurate predictions especially for pollutants, but their implementations are usually not as straightforward as for the steady models, and additional assumptions are involved. One relatively straightforward approach of implementing the unsteady flamelet model is to tabulate the time history of unsteady flamelet solutions. This often leads to flamelet libraries of large sizes because of increased dimensions for the new physics. The purpose of this paper is to introduce a new and efficient approach of tabulating unsteady flamelet solutions in the LES of complex systems, here demonstrated in simulations of a cross-flow-jet combustion system. This approach employs Taylor series expansions to represent the time history of unsteady flamelet solutions. Compared with other approaches, the new approach retains the efficiency and simplicity benefits of steady flamelet models but possesses the accuracy of unsteady flamelet models. Various issues associated with the formulation and implementation of this approach are discussed, which include the selection of the base solution, the order of accuracy of the expansion, and the treatment of simultaneous wall heat losses and heat transfer through thermal radiation. This approach is validated in large eddy simulations of a cross-flow-jet combustion system. Good agreement with experiments is obtained for both temperature and NO concentration, as well as for major species.     

Curved Oligophenylenes as Donors in Shape‐Persistent Donor–Acceptor Macrocycles with Solvatofluorochromic Properties

Many optoelectronic organic materials are based on donor–acceptor (D–A) systems with heteroatom‐containing electron donors. Herein, we introduce a new molecular design for all‐carbon curved oligoparaphenylenes as donors, which results in the generation of unique shape‐persistent D–A macrocycles. Two types of acceptor‐inserted cycloparaphenylenes were synthesized. These macrocycles display positive solvatofluorochromic properties owing to their D–A characteristics, which were confirmed by theoretical and electrochemical studies.