Microwave-assisted fast and efficient synthesis of some crown ethers

13-Crown-4,16-crown-5,dibenzo-12-crown-4 and dibenzo-14-crown-4 were synthesized by a one-pot microwave-assisted procedure in good yields.Irradiation of diols and dichlorides in the presence of sodium hydroxide in DMSO gave title crown ethers presumably within a template effect.     

Synchronization of unified chaotic system by sliding mode/mixed <Emphasis Type="Italic">H</Emphasis><Subscript>2</Subscript>/<Emphasis Type="Italic">H</Emphasis><Subscript>∞</Subscript> control

This paper deals with the synchronization of uncertain unified chaotic system in the presence of two kinds of disturbances, white noise and bounded power signal. A sliding mode controller (SMC) is established to guarantee the sliding motion. Moreover, a proportional-integral (PI) switching surface is used to determine the performance of the system in the sliding motion. Also, by using a mixed H ₂/H _∞ approach, the effect of external disturbances on the sliding motion is reduced. The necessary parameters of constructing controller and switching surface are found via semidefinite programming (SDP) which can be solved effectively by a standard software. Finally, a numerical simulation is presented to show the effectiveness of the proposed method.     

Surfactant‐directed one‐pot preparation of novel Ti‐containing mesomaterial with improved catalytic activity and reusability

Titanium was incorporated in ionic liquid based periodic mesoporous organosilica to prepare a nanostructured catalyst (Ti@PMO‐IL) with high activity. Procedure for the synthesis of Ti@PMO‐IL was followed according the simultaneous hydrolysis and condensation of alkylimidazolium ionic liquid, tetramethoxysilane (TMOS) and tetrabutylorthotitanate (TBOT) where a surfactant template was used together with a simple acid‐based catalytic aproach. N₂ adsorption isotherm of the Ti@PMO‐IL was studied to measure its mean pore volume, pore size distribution and specific surface area. Diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy was applied to identify the chemical bonds present in Ti@PMO‐IL. The morphology of this nanomaterial was investigated by scanning electron microscopy (SEM). Transmission electron microscopy (TEM) image was used to study mesoporosity and structure order of the catalyst. The catalytic activity of Ti@PMO‐IL was then studied and found to be efficient and reusable to catalyze Hantzsch reaction.     

Thermodynamic analysis and multi-objective optimization performance of solid oxide fuel cell–Ericsson heat engine–reverse osmosis desalination

Journal of Thermal Analysis and Calorimetry - This paper targets to consider a hybrid cycle consisting of a solid oxide fuel cell and an Ericsson thermal engine that provides drinking water by...     

Amino acid ionic liquid‐based titanomagnetite nanoparticles: An efficient and green nanocatalyst for the synthesis of 1,4‐dihydropyrano[2,3‐c]pyrazoles

The amino acid ionic liquid tetrabutylammonium asparaginate (TBAAsp) was immobilized on titanomagnetite (Fe_3?xTi_xO₄) nanoparticles in a facile one‐pot process using an organosilane compound (TMSP) as spacer. The modified Fe_3?xTi_xO₄@TMSP@TBAAsp magnetic nanoparticles were characterized using Fourier transform spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry and thermogravimetric analysis. The resulting analytical data clearly verified the successful immobilization of the ionic liquid on the magnetic substrate. The magnetic ionic liquid‐based nanoparticles exhibited high catalytic activity in the synthesis of 1,4‐dihydropyrano[2,3‐c]pyrazole derivatives via a one‐pot three‐component reaction under mild reaction conditions. The catalyst was easily recycled and reused for at least six runs without any considerable loss of activity.     

Sulfonic acid-functionalized titanomagnetite nanoparticles as recyclable heterogeneous acid catalyst for one-pot solvent-free synthesis of 3,4-dihydropyrimidin-2(1<Emphasis Type="Italic">H</Emphasis>)-ones/thiones

Sulfonic acid-functionalized titanomagnetite (Fe_3?x Ti _x O₄@SO₃H) nanoparticles were prepared by grafting sulfonic acid groups on Fe_3?x Ti _x O₄ nanoparticles. This new heterogeneous acid nanocatalyst demonstrated an efficient catalytic performance in the one-pot synthesis of dihydropyrimidin-2(1H)-one/thione derivatives under solvent-free conditions with high yields. The nanocatalyst could easily be separated from the reaction mixture simply by using an external magnet, recycled and reused for several times with no significant loss of catalytic activity. These nanoparticles were characterized by different physicochemical techniques, such as Fourier transform infrared, scanning electron microscopy, energy-dispersive X-ray analysis, thermogravimetric and vibrating sample magnetometer (VSM) analyses.     

N‐(3‐silyl propyl) diethylene triamine N,N',N'‐tri‐sulfonic acid immobilized on Fe3‐xTixO4 magnetic nanoparticles: A new recyclable heterogeneous nanocatalyst for the synthesis of hexahydroquinolines

In the present study, for the first time N‐(3‐silyl propyl) diethylene triamine N,N',N''‐tri‐sulfonic acid (SPDETATSA) was grafted on magnetic Fe_3‐xTi_xO₄ nanoparticles. The structure of the resulted nanoparticles was characterized based on Fourier‐transform infrared (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) analyses. The results confirmed the successful immobilization of sulfamic acid groups onto the magnetic support. These nanoparticles exhibited high catalytic activity as novel magnetically recyclable acid nanocatalyst in the synthesis of a diverse range of hexahydroquinolines through one‐pot tandem reactions in excellent yields. Also, this nanocatalyst performed satisfactory catalytic maintenance of activity for the synthesis of the reaction products after 4 rounds of recycling with no considerable loss of activity.     

Synthesis and Characterization of Alkyl‐Imidazolium‐Based Periodic Mesoporous Organosilicas: A Versatile Host for the Immobilization of Perruthenate (RuO4−) in the Aerobic Oxidation of Alcohols

The preparation and characterization of a set of periodic mesoporous organosilicas (PMOs) that contain different fractions of 1,3‐bis(3‐trimethoxysilylpropyl)imidazolium chloride (BTMSPI) groups uniformly distributed in the silica mesoporous framework is described. The mesoporous structure of the materials was characterized by powder X‐ray diffraction, transmission electron microscopy, and N₂ adsorption–desorption analysis. The presence of propyl imidazolium groups in the silica framework of the materials was also characterized by solid‐state NMR spectroscopy and diffuse‐reflectance Fourier‐transform infrared spectroscopy. The effect of the BTMSPI concentration in the initial solutions on the structural properties (including morphology) of the final materials was also examined. The total organic content of the PMOs was measured by elemental analysis, whereas their thermal stability was determined by thermogravimetric analysis. Among the described materials, it was found that PMO with 10 % imidazolium content is an effective host for the immobilization of perruthenate through an ion‐exchange protocol. The resulting Ru@PI‐10 was then employed as a recyclable catalyst in the highly efficient aerobic oxidation of various types of alcohols.