Order restricted randomized designs for control versus treatment comparison

We develop a method of randomizing units to treatments that relies on subjective judgement or on possible coarse modeling to produce restrictions on the randomization. The procedure thus fits within the general framework of ranked set sampling. However, instead of selecting a single unit from each set for full measurement, all units within a set are used. The units within a set are assigned to different treatments. Such an assignment translates the positive dependence among units within a set into a reduction in variation of contrasting features of the treatments. A test for treatment versus control comparison, with controlled familywise error rate, is developed along with the associated confidence intervals. The new procedure is shown to be superior to corresponding procedures based on completely randomized or ranked set sample designs. The superiority appears both in asymptotic relative efficiency and in power for finite sample sizes. Importantly, this test does not rely on perfect rankings; rather, the information in the data on the quality of rankings is exploited to maintain the level of the test when rankings are imperfect. The asymptotic relative efficiency of the test is not affected by estimation of the quality of rankings, and the finite sample performance is only mildly affected.     

Global variations in peak bone mass as studied by dual-energy X-ray absorptiometry

In 1994, the International Atomic Energy Agency (IAEA) initiated a 5-year Co-ordinated Research Project (CRP) to determine geographical and racial differences in peak bone mineral density (BMD) in men and women aged 15-49 years. The study demonstrates that there are distinct global differences in BMD at the hip and spine in both men and women approximating to one population standard deviation between populations with the highest and lowest BMD. These differences persist following adjustments for age, sex and body size. Such information is valuable in understanding the reasons for global differences in fracture rate and predicting future trends in fracture incidence. This revised version was published online in August 2006 with corrections to the Cover Date.     

Precision of a dual energy X-ray absorptiometry device

The standard method to diagnose and follow-up osteoporosis is the measurement of bone mineral density (BMD) using dual X-ray absorptiometry (DEXA). Manufacturers' manuals of DEXA devices state the intrascanner coefficient of variance is less than 0.01 g/cm². The aim of this study was to evaluate the in vivo coefficient of variance of a Lunar DPX scanner in male and female healthy adult subjects. Average BMD for females and males were 1.170±0.091 g/cm² and 1.272±0.115 g/cm², respectively. Monthly phantom measurements provided and controlled by the manufacturer were 1.243±0.008 g/cm² (range 1.222 to 1.257) and the coefficient of variance was 0.006. It is concluded that the in vivo coefficient of variance of DEXA devices can slightly be higher than that proposed by the manufacturer. This revised version was published online in August 2006 with corrections to the Cover Date.     

Strain analysis of Si by FEM and energy-filtering CBED.

Lattice strains around a platelet oxygen precipitate in Si wafer is studied by energy filtering convergent-beam electron diffraction (CBED) and calculations based on the finite element method (FEM). Local lattice strains are measured from CBD patterns obtained with a probe size less than 2 nm in a specimen thicker than 450 nm. Strains measured are compressive along a direction normal to a plate of the precipitation and tensile along a direction parallel to the plate. Two-dimensional stress fields near the precipitate are obtained with FEM computer analyses by fitting the measured strains. It appears that shear stresses are concentrated at the end of the precipitate edge and the maximum shear stress at an interface between the precipitate and the Si-matrix is 1.9 GPa. It is demonstrated that a combination of the energy filtering CBED and FEM is very useful for the study of local strains near interfaces in semiconductor devices, in particular for the study of stress fields that are too steep for application of the conventional CBED technique.     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

Chemical-effect variation of Kβ/Kα X-ray intensity ratios in 3d elements

Chemical effects on Kβ/Kα X-ray intensity ratios for some Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn compounds are studied experimentally. The X-ray spectra were measured by using a Si (Li) solid state detector with high resolution. The vacancies were produced by heavily filtered ²⁴¹Am gamma rays. It is found that the Kβ/Kα X-ray intensity ratios measured with compounds deviated up to 43% from the corresponding values of the pure elements. The values for pure elements are compared with the other experimental and with theoretical values.     

Influence of even nucleon numbers and closed shells on mass and charge distribution in low energy fission

Extensive experimental and evaluated yield data are now available for the fragments in low energy nuclear fission. Using these data we re-examined the influence of even nuclear numbers and closed shells on the mass and charge distribution in low energy fission. We used WAHL's Zp model and Ap model. We also examined the effects ofZ=50,N=82 and possiblyN=88 shells. A new method was developed based on two Gaussian curves for the even and odd products. TheEOZ andEON values calculated are based on these different methods and are seen to be consistent with each other in spite of the somewhat different definitions of the even-odd effect. The even-odd effect decreases with an increasing fissility parameter. TheEON values are substantially lower than the correspondingEOZ values, probably due to the effect of washing out the neutron pairing effect by prompt neutron emission. The magnitude of the even-odd effect varies with different mass regions. TheEOZ andEON values decrease as they go from asymmetric to symmetric regions in mass distributions.     

Sodium p‐nitro­benzoxasulfamate monohydrate

The title compound, alternatively named sodium 6‐nitro‐3H‐1,2,3‐benzoxa­thia­zole 2,2‐dioxide monohydrate, Na⁺·C₆H₃­N₂O₅S^?·H₂O, consists of chains of NaO₇ units, with the seven donor‐O atoms coming from two water mol­ecules and five p‐­nitro­benzoxasulfamate anions. The seven‐coordinate geometry around the Na⁺ ion is described as monocapped trigonal prismatic, but with a large distortion from ideal geometry. Each triangular face is defined by one O atom each from a water mol­ecule, a nitro group and a sulfonyl group. An O atom from a sulfonyl group caps one of the square faces of the trigonal prism in an unsymmetrical fashion. The water mol­ecules and one sulfonyl O atom are involved in bridging adjacent units, as is the nitro group of the anion. The sulfamate ions adopt an antiparallel alignment between the NaO₇ units and are connected to each other by C—H?O and π–π interactions. The three‐dimensional crystal structure is stabilized by a network of strong O—H?N hydrogen bonds.     

Synthesis, molecular and crystal structure of bis(triethanolamine)manganese(II) saccharinate: a seven-coordinate manganese complex with tri- and tetradentate triethanolamine ligands

The synthesis, molecular and crystal structure of bis(triethanolamine)Mn(II) saccharinate, [Mn(tea)₂](sac)₂ are reported. The configuration of the tea ligands results in an unusual example of coordination number seven for the Mn(II) ion. The two triethanolamine (tea) ligands coordinate to the Mn(II) ion forming a monocapped trigonal prism geometry, in which one of the tea ligands behaves as a tridentate ligand, while the other one acts as a tetradentate donor. The free and coordinated hydroxyl hydrogens of the tea ligands are involved in hydrogen bonding with the amine nitrogen, carbonyl and sulfonyl oxygens of the neighbouring sac ions to form a three-dimensional infinite network. A weak π–π interaction between the phenyl rings of the sac ions also occurs.     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.