Low temperature thermoelectric properties of Cu intercalated TiSe2: a charge density wave material

Y₂O₃ nanoparticles and nanorods have been firstly synthesized in bulk Ti-Y films prepared by magnetron sputtering on Si (100) substrates at different temperatures. X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDS) are used to characterize the structure, morphology, and composition of the as-synthesized nanoparticles and nanorods. The mechanical properties of the sputtered films are investigated using nanoindentation techniques. The results indicate that both the nanoparticles and nanorods have a pure cubic Y₂O₃ structure resulting from the reaction of Y atoms with the residual O₂ in the vacuum chamber, and are free from defects and dislocations with uniform diameters of about 30 nm. The Y₂O₃ nanoparticles mainly distribute at the grain boundaries of the Ti matrix and the nanorods have lengths ranging from 250 nm to more than 1 μm with the growth direction parallel to the (002) plane. As the growth temperature elevates, the nanoparticles turn to be coarsening while more and longer nanorods are inclined to form. Compared with the Ti film, the TiY films have a remarkable increase in hardness, but do not exhibit expected increase in elastic modulus. Finally, the growth mechanism is also briefly discussed.     

A general strategy for creating "inactive-conformation" abl inhibitors

Kinase inhibitors that bind to the ATP cleft can be broadly classified into two groups: those that bind exclusively to the ATP site with the kinase assuming a conformation otherwise conducive to phosphotransfer (type I), and those that exploit a hydrophobic site immediately adjacent to the ATP pocket made accessible by a conformational rearrangement of the activation loop (type II). To date, all type II inhibitors were discovered by using structure-activity-guided optimization strategies. Here, we describe a general pharmacophore model of type II inhibition that enables a rational "hybrid-design" approach whereby a 3-trifluoromethylbenzamide functionality is appended to four distinct type I scaffolds in order to convert them into their corresponding type II counterparts. We demonstrate that the designed compounds function as type II inhibitors by using biochemical and cellular kinase assays and by cocrystallography with Abl.     

Shape resonances in slow electron scattering by aromatic molecules. I. Anthraquinone derivatives

A series of anthraquinone (C(14)O(2)H(8)) derivatives has been studied by means of electron capture negative ion mass spectrometry (ECNI-MS), photoelectron spectroscopy (PES), and AM1 quantum chemical calculations. Mean lifetimes of molecular negative ions M(-.) (MNI) have been measured. The mechanism of long-lived MNI formation in the epithermal energy region of incident electrons has been investigated. A simple model of a molecule (a spherical potential well with the repulsive centrifugal term) has been applied for the analysis of the energy dependence of cross sections at the first stage of the electron capture process. It has been shown that a temporary resonance of MNI at the energy approximately 0.5 eV corresponds to a shape resonance with lifetime 1-2.10(-13) s in the f-partial wave (l = 3) of the incident electron. The next resonant state of MNI at the energy approximately 1.7 eV has been associated with the electron excited Feshbach resonance (whose parent state is a triplet npi* transition). In all cases the initial electron state of the MNI relaxes into the ground state by means of a radiationless transition, and the final state of the MNI is a nuclear excited resonance with a lifetime measurable on the mass spectrometry timescale. Copyright 1999 John Wiley & Sons, Ltd.     

A finite element formulation for global linear stability analysis of a nominally two‐dimensional base flow

A stabilized finite element method, to carry out the linear stability analysis of a two‐dimensional base flow to three‐dimensional perturbations that are periodic along span, is presented. The resulting equations for the time evolution of the disturbance requires a solution to the generalized eigenvalue problem. The analysis is global in nature and is also applicable to non‐parallel flows. Equal‐order‐interpolation functions for velocity and pressure are utilized. Stabilization terms are added to the Galerkin formulation to admit the use of equal‐order‐interpolation functions and to eliminate node‐to‐node oscillations that might arise in advection‐dominated flows. The proposed formulation is tested on two flow problems. First, the mode transitions in the circular Couette flow are investigated. Two scenarios are considered. In the first one, the outer cylinder is at rest, while the inner one spins. Two linearly unstable modes are identified. The primary mode is real and represents the axisymmetric Taylor vortices. The second mode is complex and consists of spiral vortices. For the counter‐rotating cylinders, the primary transition is via the appearance of spiral vortices. Excellent agreement with results from earlier studies is observed. The formulation is also utilized to investigate the parallel and oblique modes of vortex shedding past a cylinder for the Re = 100 flow. It is found that the flow is associated with a large number of unstable oblique shedding modes. The parallel mode of vortex shedding is a special case of this family of modes and is associated with the largest growth rate. Copyright © 2014 John Wiley & Sons, Ltd.     

Titrimetric and spectrophotometric assay of pantoprazole in pharmaceuticals using cerium(IV) sulphate as oxidimetric agent

Titrimetric and spectrophotometric assay of pantoprazole sodium sesquihydrate (PSS) using cerium(IV) sulphate as the oxidimetric reagent is described. The methods are based on the oxidation of PSS with a measured excess of Ce(IV) sulphate followed by the determination of unreacted oxidant using different reaction schemes. In titrimetry, the unreacted oxidant was determined by back titration with ferrous ammonium sulphate (FAS) in sulphuric acid medium. Spectrophotometry involves the reduction of unreacted Ce(IV) sulphate with a fixed quantity of Fe(II). The resulting Fe(III) is complexed with thiocyanate and the absorbance is measured at 470 nm. In both the methods, the amount of Ce(lV) sulphate reacted corresponds to PSS concentration. Titrimetry is applicable over 1–10 mg range whereas in spectrophotometry, the calibration graph is linear in the range of 0.5–7.0 μg/mL and the calculated molar absorptivity value is 1.58 × 10⁵ L/mol cm. The validity of the proposed methods was tested by analyzing pure and dosage forms containing PSS. Statistical treatment of the results reflects that the proposed procedures are precise, accurate and easily applicable to the determination of PSS in pure form and in pharmaceutical formulations.     

Luminescence properties of Eu3+ doped CaMoO4 nanoparticles

When Eu(3+) ions occupy Ca(2+) sites of CaMoO(4), which has a body centered tetragonal structure with inversion symmetry, only the magnetic dipole transition ((5)D(0)→(7)F(1)) should be allowed according to Judd-Ofelt theory. Even if there are a few distortions in the Eu(3+) environment, its intensity should be more than that of the electric dipole transition ((5)D(0)→(7)F(2)). We report here the opposite effect experimentally and ascribe this to the polarizability effect of the MoO(4) tetrahedron, which is neighboring to EuO(8) (symmetric environment). The contribution of the energy transfer process from the Mo-O charge transfer band to Eu(3+) and the role of Eu(3+) over the surface of the particle could be distinguished when luminescence decay processes were measured at two different excitations (250 and 398 nm). Further, the luminescence intensities and lifetimes increase significantly with increasing heat-treatment temperature of the doped samples. This is attributed to the reduction of H(2)O from the surface of the particles and a non-radiative process after heat treatment.