X-ray fluorescence in some rare earth and high Z elements excited by 661.6 keV γ-rays

The K-shell X-ray fluorescence cross sections are determined experimentally for 10 elements such as Pb, Hg, Ir, W, Lu, Tm, Dy, Tb, Gd and Nd at excitation energy of 661.6 keV associated with γ-rays of ¹³⁷Cs radioisotope. The technique employed involves the measurement of total intensity of fluorescent K X-rays that follow the photoeffect absorption of a known flux of γ-rays using a well type Nal(Tl) detector. The obtained results are compared with the available theoretical values and other measured values.     

Evidence for N2N3N45 super coster kronig processes in metallic Nb,Mo, Ru and Rh

The 4p photoelectron spectra of metallic Nb, Mo, Ru and Rh have been recorded. By use of a deconvolution procedure it is shown that the 4p_{$\text{1}\text{2}$} spin-orbit component has a linewidth which significantly exceeds that of the 4p_{$\text{3}\text{2}$} component. This suggests that N₂N₃N₄₅ super Coster Kronig processes give a considerable contribution to the decay rata of the 4p_{$\text{1}\text{2}$} hole state.     

Electrochemical techniques for lab-on-a-chip applications

During the last few years there has been a rapid increase in the use of electrochemical reactions in lab-on-a-chip devices. This development, which has so far mainly focussed on electrochemical detection in chip-based capillary electrophoresis, can be explained by the fact that electrochemical techniques and devices are particularly well-suited for inclusion in lab-on-a-chip systems. The most important reason for this is that the required electrodes can readily be manufactured and miniaturised without loss of analytical performance using conventional microfabrication methods. In this Research Highlight article, the developments during the last three years concerning electrochemical techniques for lab on-a-chip applications are discussed, with particular focus on emerging electrochemical methods for sample clean-up and preconcentration, electrochemical derivatisation and electrochemical detection in chip-based capillary electrophoresis.     

New pentafluorothiophenoxo derivatives of tin,lead, antimony,bismuth, gold and platinum

Summary Salts of the anions [SnX₅]^–, [SnX₄Cl, [SnX₃Cl₂]^–, [SnX₃]^–, [PbX₃]^–, [SbX₄]^–, [SbX₃Cl]^–, [SbX₂Cl₂]^–, [BiX₄]^–, [AuCl₂]^–, [AuX₂]^–, [AuXCl]^–, [AuX₄]^–, [Au₂X₆]^2– and [PtX₄]^2–, where X^– = C₆F₅S^–, have been isolated and characterised. The neutral SbX₃ and BiX₃ species, have also been isolated and shown to be pyramidal monomers (¹⁹F.n.m.r., i.r., and Raman spectral evidence). Various physical properties of the complexes prepared, as well as their stereochemistries (where these could be ascertained), are similar to those of the known corresponding halogeno compounds of these elements. These results further demonstrate the pseudo-halide nature of the pentafluorothiophenoxide ion.Author to whom all correspondence should be directed at: Laboratoire de Chimie de Coordination, Uniyersité Louis Pasteur, 67008 Strasbourg, France.     

Electrochemical solid-phase microextraction of anions and cations using polypyrrole coatings and an integrated three-electrode device

A method for the extraction, transfer and desorption of anions and cations under controlled potential conditions employing a new integrated three-electrode device is described. The device, containing working, reference and counter electrodes, was prepared from tubes that could be moved vertically with respect to each other. In this way, a small amount of solvent, held by capillary force, remained between the electrodes when the device was lifted out of a solution after an extraction. This design allowed the potential control to be maintained at all times. With the new integrated device, it was possible to perform potential controlled desorption into vials containing as little as 200 microl of solution. The required ion exchange capacity was obtained by electrodeposition of a polypyrrole coating on the surface of the glassy carbon working electrode. Solid-phase microextractions of several cations or anions were performed simultaneously under potentiostatic control by doping the polypyrrole coating with different anions such as perchlorate and p-toluenesulfonate. The efficiency of the extractions, which could be altered by varying the potential of the working electrode, could be increased by 150 to 200% compared to extractions using normal solid-phase microextraction conditions under open circuit conditions. A constant potential of +1.0 V and -0.5 V with respect to the silver pseudo reference electrode, was found to be well-suited for the extraction of samples containing ppm concentrations of anions (chloride, nitrite, bromide, nitrate, sulfate and phosphate) and cations (cadmium, cobalt and zinc), respectively.     

Degradation effects in the extraction of antioxidants from birch bark using water at elevated temperature and pressure

Experiments with birch bark samples have been carried to enable a distinction between extraction and degradation effects during pressurised hot water extraction. Two samples, E80 and E180, contained birch bark extracts obtained after extraction at 80 and 180 °C for up to 45 min, respectively. Two other samples, P80 and P180, were only extracted for 5 min at the two temperatures and were thereafter filtered and hydrothermally treated at 80 and 180 °C, respectively. During the latter treatment, samples were collected at different times to assess the stability of the extracted compounds. An offline DPPH (2,2-diphenyl-1-picrylhydrazyl) assay, as well as a high performance liquid chromatographic separation coupled to an electrochemical detector, were used to determine the antioxidant capacity of the processed samples. The results obtained with the different techniques were compared to assess the yield of the extraction and degradation processes. In addition, an online hyphenated system comprising high performance liquid chromatography coupled to diode-array; electrochemical; and tandem mass spectrometric detection (HPLC-DAD-ECD-MS/MS) was used to study the compositions of the extracts in more detail. The results for the samples processed at 80 °C showed that the extraction reached a steady-state already after 5 min, and that the extracted compounds were stable throughout the entire extraction process. Processing at 180 °C, on the other hand, gave rise to partly degraded extracts with a multitude of peaks in both the diode array and electrochemical detectors, and a higher antioxidant capacity compared to for the extracts obtained at 80 °C. It is concluded that HPLC-DAD-ECD is a more appropriate technique for the determination of antioxidants than the DPPH assay. The mass spectrometric results indicate that one of the extracted antioxidants, catechin, was isomerised to its diastereoisomers; (+)-catechin, (−)-catechin, (+)-epicatechin, and (−)-epicatechin.     

An yttrium Mξ source for ESCA

A new source for producing YMξ radiation in an ESCA spectrometer is described. The system makes use of continuous evaporation of yttrium on a rotating anode. It is demonstrated that this scheme allows YMξ-excited electron spectra to be recorded without gradual loss of resolution and intensity due to anode oxidation. Electron spectra of Ar, Hg and N₂ excited by YMξ radiation are studied. Relative photoelectric cross-sections of the 5d_{$\text{5}\text{2}$}, 5d_{$\text{5}\text{2}$} and 6s orbitals in Hg and the four valence orbitals in N₂ are measured. The valence electron shake-up spectrum of N₂ is discussed.     

Fluorine Kα radiation for the excitation of electron spectra

The applicability of the F Kα X-ray line (hv = 676 eV) from potassium fluoride for the excitation of electron spectra is demonstrated. Relative photoionization cross-sections in Au and gaseous Hg have been measured. The F Kα radiation from KF, RbF and CsF has been studied. The Ba Mζ line (hv = 602 eV) is found to be too broad for use in ESCA, even when emitted from metallic barium.