Compositions for health products obtained by treatment of tomato with beta-cyclodextrin

The aim of this work was to produce lycopene-containing powders from tomato products by a solvent-free method making use of β-cyclodextrin (βCD). Powders were prepared by spray-drying a tomato concentrate (TC), one of the most bioavailable form of lycopene, after mechanical treatment with βCD in different weight ratios. The obtained product was centrifuged to eliminate partly food matrix and characterized for the amount of lycopene hydrodispersed/hydrosolubilized in the aqueous fraction. The chemical antioxidant activity of sera was evaluated too. Powders obtained by spray-drying sera exhibited good flow properties, a lycopene content between 0.4 and 1.09 mg/g and excellent water dispersability. The process developed, which makes use of βCD for the treatment of tomato products, turns to be of great interest to obtain a bulk material for nutraceuticals displaying superior biovailability of lycopene.     

Benzo[d]-1,2-oxaphospholes as precursors of stabilized C-centered radicals

[reaction: see text] Several benzo[d]-1,2-oxaphosphole 2-oxides were examined as potential precursors of stabilized C-centered radicals. The transient absorption spectra obtained after laser flash photolysis in the presence of di-tert-butyl peroxide showed the features of benzylic radicals with formation and decay kinetics not significantly influenced by the presence of oxygen. In the case of compounds with two possible diastereomeric forms, the C-H bond of the trans-isomers [corrected] is more reactive toward hydrogen abstraction.     

Short range photoinduced electron transfer in proteins: QM-MM simulations of tryptophan and flavin fluorescence quenching in proteins

Hybrid quantum mechanical-molecular mechanics (dynamics) were performed on flavin reductase (Fre) and flavodoxin reductase (Fdr), both from Escherichia coli. Each was complexed with riboflavin (Rbf) or flavin mononucleotide (FMN). During 50 ps trajectories, the relative energies of the fluorescing state (S₁) of the isoalloxazine ring and the lowest charge transfer state (CT) were assessed to aid prediction of fluorescence lifetimes that are shortened due to quenching by electron transfer from tyrosine. The simulations for the four cases display a wide range in CT–S₁ energy gap caused by the presence of phosphate, other charged and polar residues, water, and by intermolecular separation between donor and acceptor. This suggests that the Gibbs energy change (ΔG₀) and reorganization energy (λ) for the electron transfer may differ in different flavoproteins.     

On the convergence of isolated neutral oxygen vacancy and divacancy properties in metal oxides using supercell models

The properties of isolated neutral oxygen vacancies and divacancies of metal oxides of increasing complexity (MgO, CaO, alpha-Al2O3, and ZnO) have been studied by means of density-functional theory within a supercell periodic approach. Vacancy formation energies, vacancy-vacancy interactions, and geometry rearrangements around these point defects have been investigated in detail. The characterization of the electronic structure of these point defects has been established by analysis of the density of states and of the topology of the electron density and of electron localization function. It is found that the chemical character of the oxide determines the properties of the oxygen vacancies. For the covalent ZnO oxide, a more complex scheme arises in which the relaxation around the oxygen vacancy is much larger leading to the formation of Zn4-like almost metallic particles in the crystal. The relationship of these structures with the crystal shear planes is discussed. The present study shows that supercells containing approximately 200-300 atoms provide converged values for the geometric and electronic structure of oxygen vacancies of these metal oxides in the point defect low concentration limit.     

Development and validation of an analytical methodology for the determination of p,p′-DDT, p,p′-DDE and p,p′-DDD in fish oil pills

An analytical methodology was proposed and validated to be applied to the determination of p,p′-DDT and its metabolites p,p′-DDE and p,p′-DDD in fish oil. The analytical procedure presented in this paper involves a single-step clean up process prior to the analysis. A solution of 1,2,3,4-tetrachloronaphtalene was used as internal standard.The analytical technique used was gas chromatography coupled to an electron capture detector. Details on the validation process are provided.The limits of detection ranged from 2.6 to 4.7 pg μL^− 1. The BCR 598 standard reference material (cod liver oil) was used to evaluate the performance of the methodology with satisfactory recoveries for all the compounds.The analytes were determined in three different fish oil pills sold in Spain as a supplementary vitamin support. The sum of p,p′-DDT and metabolites was from 13.2 to 51.3 ng g^− 1, the dominant compound being p,p′-DDE.     

Solid-phase synthesis of the cyclic lipononadepsipeptide [N-Mst(Ser1), d-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin

An optimized solid-phase strategy for the preparation of the cyclic lipononadepsipeptide [N-Mst(L-Ser1), D-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin is reported. The strategy is based on the use of a mild orthogonal protection scheme and the incorporation of the nonproteinogenic amino acid (Z)-Dhb into the peptide chain as the dipeptide Fmoc-Thr(tBu)-(Z)-Dhb-OH. The didehydrodipeptide was synthesized by a water-soluble carbodiimide-induced beta-elimination of a protected dipeptide containing a residue of Thr with its free hydroxy side chain unprotected.     

Stereoselective synthesis of trans-2,3-disubstituted pyrrolidines via addition to N-acyliminium ions

An efficient and stereoselective synthesis of trans-2,3-disubstituted pyrrolidines is described. The intermolecular alkylation of racemic N-acyliminium ions generated in situ from the corresponding 3-substituted lactams proceeds stereoselectively and in high yield.     

Structural phase transitions in ‘hcp’ C70 single-crystals

The thermal expansion of vapor-grownC ₇₀ single crystals ahs been investigated using high-resolution capacitance dilatometry from 5–380 K. Measurements were made both parallel and perpendicular to the hexagonalc-axis. Three first-order phase transitions which we associate with the consecutive disordering of theC ₇₀ molecules are observed upon heating at 280 K (long-axis spinning), 300 K (long-axis precession) and 355 K (quasi-free rotation), respectively. The highest-temperature transition exhibits a very large (50 K) thermal hysteresis. Powder and single-crystal X-ray diffraction show that the crystals are predominantly hexagonal-close-packed (HCP) with an idealc/a1.63 above 360 K andc/a1.84 at 295 K.     

Design and synthesis of push-pull chromophores for second-order nonlinear optics derived from rigidified thiophene-based pi-conjugating spacers.

Two series of push-pull chromophores built around thiophene-based pi-conjugating spacers rigidified either by covalent bonds or by noncovalent intramolecular interactions have been synthesized and characterized by UV-vis spectroscopy, electric field induced second harmonic generation (EFISH) and differential scanning calorimetry. Comparison of the linear and second-order nonlinear optical properties of chromophores based on a covalently bridged dithienylethylene (DTE) spacer with those of their analogues based on open chain DTE shows that the rigidification of the spacer produces a considerable bathochromic shift of the absorption maximum together with a dramatic enhancement of the molecular quadratic hyperpolarizability (mu beta) which reaches values among the highest reported so far. A second series of NLO-phores has been derived from a 2,2'-bi(3,4-ethylenedioxythiophene) (BEDOT) pi-conjugating spacer. As indicated by X-ray and UV-vis data, rigidification of the spacer originates in that case, from noncovalent intramolecular interactions between sulfur and oxygen atoms. Again, comparison with the parent compounds based on an unsubstituted bithiophene spacer reveals a marked red shift of the absorption maximum and a large enhancement of mu beta. In an attempt to distinguish the contribution of the electronic and geometrical effects of the ethylenedioxy group, a third series of NLO-phores based on 3,4-ethylenedioxythiophene (EDOT) and 3,4-dihexyloxythiophene spacers has been synthesized. Comparison with compounds based on unsubstituted thiophene shows that, despite a red shift of lambda(max), introduction of alkoxy groups leads to a decrease of mu beta. Theoretical calculations indicate that this effect results from a decrease of the dipole moment (mu) caused by the auxiliary electron-donor alkoxy groups on the thiophene ring. In contrast, replacement of BT by BEDOT produces an increase of mu, which associated with the noncovalent rigidification of the BT system accounts for the observed enhancement of mu beta.     

Structure determination of homoleptic AuI, AgI, and CuI aryl/alkylethynyl coordination polymers by X-ray powder diffraction

This article describes the structure determination of five homoleptic d(10) metal-aryl/alkylacetylides [RC triple bond CM] (M=Cu, R=tBu 1, nPr 2, Ph 3; R=Ph, M=Ag 4; Au 5) by using X-ray single-crystal and powder diffraction. Complex 1.C6H6 reveals an unusual Cu20 catenane cluster structure that has various types of tBuC triple bond C-->Cu coordination modes. By using this single-crystal structure as a starting model for subsequent Rietveld refinement of X-ray powder diffraction data, the structure of the powder synthesized from CuI and tBuC triple bond CH was found to have the same structure as 1. Complex 2 has an extended sheet structure consisting of discrete zig-zag Cu4 subunits connected through bridging nPrC triple bond C groups. Complex 3 forms an infinite chain structure with extended Cu-Cu ladders (Cu-Cu=2.49(4)-2.83(2) A). The silver(I) congener 4 is iso-structural to 3 (average Ag-Ag distance 3.11 A), whereas the gold(I) analogue 5 forms a Au...Au honeycomb network with PhC triple bond C pillars (Au-Au=2.98(1)-3.26(1) A). Solid-state properties including photoluminescence, nu(C triple bond C) stretching frequencies and thermal stability of these polymeric systems are discussed in the context of the determined structures.