An Update on Molecularly Imprinted Polymer Design through a Computational Approach to Produce Molecular Recognition Material with Enhanced Analytical Performance

Molecularly imprinted polymer (MIP) computational design is expected to become a routine technique prior to synthesis to produce polymers with high affinity and selectivity towards target molecules. Furthermore, using these simulations reduces the cost of optimizing polymerization composition. There are several computational methods used in MIP fabrication and each requires a comprehensive study in order to select a process with results that are most similar to properties exhibited by polymers synthesized through laboratory experiments. Until now, no review has linked computational strategies with experimental results, which are needed to determine the method that is most appropriate for use in designing MIP with high molecular recognition. This review will present an update of the computational approaches started from 2016 until now on quantum mechanics, molecular mechanics and molecular dynamics that have been widely used. It will also discuss the linear correlation between computational results and the polymer performance tests through laboratory experiments to examine to what extent these methods can be relied upon to obtain polymers with high molecular recognition. Based on the literature search, density functional theory (DFT) with various hybrid functions and basis sets is most often used as a theoretical method to provide a shorter MIP manufacturing process as well as good analytical performance as recognition material.     

Erratum: Synthesis and characterization of diorganotin(IV) complexes of Schiff bases with ONO‐type donors and crystal structure of [N‐(2‐hydroxy‐4‐nitrophenyl)‐3‐ethoxysalicylideneiminato]diphenyltin(IV)

The article referenced above was first published online on 30 August 2007 with incorrect pagination; the pagination has now been corrected online and in print. Copyright © 2007 John Wiley & Sons, Ltd.     

An optical fibre pH sensor based on dye doped mesostructured silica

This paper describes the synthesis and optical pH sensing properties of a pH indicator dye activated mesostructured silica coated optical fibre. The pH-sensitive dye bromothymol blue was incorporated into the mesostructure sol precursor and thin films/coatings were used for pH-sensing applications without prior removal of the surfactant. The pH sensitivity range and operating wavelength were analysed by absorption measurements on layer dip-coated on glass slides. The pH sensing properties of coated optical fibre were tested by evanescent wave method. Experiments were carried out by using a series of solutions of known pH. No leaching was observed (except at very high pH) and an excellent reversibility was obtained between pH=2 and 5.     

Nitroxide‐mediated radical polymerization in miniemulsion: Bimolecular termination in monomer‐free model systems

Bimolecular termination in nitroxide‐mediated radical polymerization in miniemulsion has been investigated through the heating of a polystyrene–2,2,6,6‐tetramethylpiperidinyl‐1‐oxy macroinitiator and its 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy analogue in an aqueous toluene dispersion with sodium dodecyl benzenesulfonate as a surfactant at 125 °C. The level of bimolecular termination by combination, evaluated from the high‐molecular‐weight shoulder, was higher in miniemulsion than in solution and increased with decreasing particle size. Quantitative analysis revealed that these results cannot be rationalized solely by nitroxide partitioning to the aqueous phase. The results are explained by an interface effect, by which nitroxide is adsorbed or located at the aqueous–organic interface. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4995–5004, 2007     

Direct and simultaneous voltammetric analysis of heavy metals in tap water samples at Assiut city: an approach to improve the analysis time for nickel and cobalt determination at mercury film electrode

Tap water samples (Assiut city, lie in the middle north of upper Egypt, approx. 370 km from Cairo, January-March, 2002) were taken from the eight sampling sites of different locations at Assiut city. The samples are analyzed to determine the total content of cadmium, copper, lead and zinc by differential pulse anodic stripping voltammetry (DPASV) while nickel and cobalt are determined by a new simple differential pulse adsorptive stripping voltammetry (DPAdSV), using dimethylglyoxime (DMG) as the complexing agent. This method uses sodium sulfite as the supporting electrolyte, which facilitates the removal of oxygen interference without the traditional necessity of purging with inert gas. The effect of various parameters was studied using DPASV (for Cd, Pb, Cu and Zn) and AdSV (for Ni and Co) methods. Subsequently, under the so found experimental conditions, the stability of calibration curves and the detection limits (μg/l) have been determined. The data achieved (for all metals utility) are comparable to those measured by the graphite furnace atomic absorption spectrophotometric (GF-AAS) method. The effects of the interferences between these metal ions have been investigated. Moreover, the effect of storage was discussed and the obtained results were compared favorably with standard official methods. Statistical analysis of the database exhibits applicability and the accuracy of the techniques. The results obtained from the two techniques (Voltammetry and GF-AAS) are in very good agreements in the most tap water samples.     

In situ assembled ZIF superstructures via an emulsion-free soft-templating approach

Assembling well-defined MOF superstructures remains challenging as it requires easily removable hard templates or readily available immiscible solutions for an emulsion-based soft-template approach. In this work, a single-step emulsion-free soft templating approach is reported to spontaneously prepare hollow ZIF-8 and ZIF-67 colloidosomes with no further purification. These superstructures can load different enzymes regardless of the size and charge with a high encapsulation efficiency of 99%. We envisage that this work will expand the repertoires of MOF superstructures by the judicious selection of precursors and the reaction medium.

An emulsion-free approach for the preparation of hollow ZIF-8 superstructures in a single step is established based on metal sulfate hydrates in methanol.     

Growth properties of the q-Dunkl transform in the space $$L^{p}_{q,\alpha }({\mathbb {R}}_{q},|x|^{2\alpha +1}d_{q}x)$$ L q , α p ( R q , | x | 2 α + 1 d q x )

The Ramanujan Journal - Our aim in this work is to prove an analogue of Titchmarsh’s theorem [19, Theorem 84] and Younis’s theorem [20, Theorem 3.3] on the image under the q-Dunkl...     

Synthesis of thienothiazocinoisoindolediones and thienothiazinoisoindolones from mercaptothiophenes and chloromethylphthalimide

2-Thienylthiomethylphthalimides 3a,b were synthesized by action of Chloromethylphthalimide on 2-or 3-mercaptothiophene. Reduction of 3a,b and Wittig reaction using carbethoxycarbonyltriphenyl-phosphorane gave the corresponding acetic acids 5a,b which cyclized under Friedel and Crafts conditions to lead the thienothiazocinoisoindolediones 6a,b. Thienothiazinoisoindolones 7a,b were obtained from hydroxyisoindolones derivatives 4a,b in acid conditions via an acyliminium ion.     

FT-IR spectroscopic detection of pesticide after sorption onto modified pumice

Organoclays can be prepared by modification of the surface with a cationic surface active compound and used for the immobilisation or separation of non-polar contaminants from polluted waters. In this work pumice is used instead of clay material. Batch system experiments were performed for the modification of pumice surface with hexadecyltrimethylammonium bromide. Modification of pumice and then the sorption of pesticide, Fenvalerate, from water have been traced by FT-IR spectroscopy.     

The determination of selenium concentration in blood and tumour tissues of breast cancer patients in Syria using instrumental neutron activation analysis

The aim of this study was to investigate the relationship of selenium concentration in blood components and tumour tissues of breast cancer patients and healthy volunteers (control), in Syria, using instrumental neutron activation analysis (INAA). Red blood cells and serum selenium concentrations were determined in 50 healthy volunteers aged 25-70 years and 70 breast cancer patients aged 25-84 years. Selenium levels were also measured in malignant and adjacent normal tissues from breast cancer patients. The accuracy of the analysis was evaluated by co-analyses of international reference materials. The results showed that selenium concentration in serum and RBC was significantly lower among breast cancer patients compared to healthy volunteers (P<0.001). The results also showed that the selenium concentration was significantly higher in the cancer tissues compared to adjacent normal tissues (P<0.001). We conclude that there is a good indication for selenium deviation in blood and malignant tissue of breast cancer patients compared to that of healthy volunteers. This revised version was published online in July 2006 with corrections to the Cover Date.