Specifications of dust-ion-acoustic shock waves affected by dust charge variation in four-component dissipative quantum plasma

ABSTRACT

Nonlinear propagation of dust-ion-acoustic shock waves in an unmagnetized, collisionless four-component quantum plasma containing electrons, positrons, ions and negatively charged dust grains affected by dust charge variations and viscosity of ions is studied using quantum hydrodynamic model. Considering dust charge variation give rise to calculating of charging currents of the plasma particles. These currents have been calculated with orbit limited motion theory and using Fermi-distribution functions or Boltzmann–Maxwell distribution depending on quantum or classical particles, respectively. The basic characteristics of quantum dust-ion-acoustic shock waves are investigated by deriving Korteweg–de Vries–Burgers equation under the reductive perturbation method. Depending on the relative values of the dispersive and dissipative coefficients, oscillatory and monotonic shock waves can propagate in the plasma model. The effect of chemical potential and density of dust particles on the shock wave’s height and thickness is investigated. In addition, the critical value of H (H_c) is calculated and it is shown that for R?>?0 compressive shock waves and for R?<?0 rarefactive ones can exist. The present study is applicable to researchers on quantum nonlinear structures in dense astrophysical objects and ultra-small micro- and nano-electronic devices.     

Sorptive thin film microextraction followed by direct solid state spectrofluorimetry: A simple,rapid and sensitive method for determination of carvedilol in human plasma

A poly acrylate-ethylene glycol (PA-EG) thin film is introduced for the first time as a novel polar sorbent for sorptive extraction method coupled directly to solid-state spectrofluorimetry without the necessity of a desorption step. The structure, polarity, fluorescence property and extraction performance of the developed thin film were investigated systematically. Carvedilol was used as the model analyte to evaluate the proposed method. The entire procedure involved one-step extraction of carvedilol from plasma using PA-EG thin film sorptive phase without protein precipitation. Extraction variables were studied in order to establish the best experimental conditions. Optimum extraction conditions were the followings: stirring speed of 1000 rpm, pH of 6.8, extraction temperature of 60 °C, and extraction time of 60 min. Under optimal conditions, extraction of carvedilol was carried out in spiked human plasma; and the linear range of calibration curve was 15–300 ng mL⁻¹ with regression coefficient of 0.998. Limit of detection (LOD) for the method was 4.5 ng mL⁻¹. The intra- and inter-day accuracy and precision of the proposed method were evaluated in plasma sample spiked with three concentration levels of carvedilol; yielding a recovery of 91–112% and relative standard deviation of less than 8%, respectively. The established procedure was successfully applied for quantification of carvedilol in plasma sample of a volunteer patient. The developed PA-EG thin film sorptive phase followed by solid-state spectrofluorimetric method provides a simple, rapid and sensitive approach for the analysis of carvedilol in human plasma.     

Structural basis of pyrazolopyrimidine derivatives as CAMKIIδ kinase inhibitors: insights from 3D QSAR,docking studies and in silico ADMET evaluation

Ca²⁺/calmodulin-dependent protein kinase II (CAMKIIδ) belongs to the serine/threonine kinase family, which is involved in a broad range of cellular events in cell survival and proliferation as well as a number of other signal transduction pathways. Thus, it is regarded a promising target for treatment of cancers. In the present paper, a three-dimensional quantitative structure–activity relationship and molecular docking were applied to investigate a series of new CAMKIIδ inhibitors of pyrazolopyrimidine derivatives. The determination coefficient (R²) and leave-one-out cross-validation coefficient (Q²) of CoMSIA model are 0.676 and 0.956, respectively. The predictive ability of this model was evaluated by the external validation using a test set of eight compounds with a predicted determination coefficient \(R^{ 2}_{\text{test}}\) of 0.80, besides the mean absolute error of the test set was 0.328 log units. Docking results are in concordance with CoMSIA contour maps, gave the information for interactive mode exploration. Based on those satisfactory results, newly designed molecules were predicted with highly potent CAMKIIδ inhibitory activity, additionally, they have showed promising results in the preliminary in silico ADMET evaluations. This study could expand our understanding of pyrazolopyrimidine derivatives as inhibitors of CAMKIIδ and would be of great help in lead optimization for early drug discovery of highly potent CAMKIIδ inhibitors.     

Single-walled carbon nanotubes as solid-phase microextraction adsorbent for the determination of low-level concentrations of butyltin compounds in seawater

Carbon nanotubes are a kind of new carbon-based nanomaterials, which have drawn great attention in many application fields. The potential of single-walled carbon nanotubes (SWCNTs) as solid-phase microextraction (SPME) adsorbent for the preconcentration of environmental pollutants has been investigated in recent years. In the present study, the feasibility of SWCNTs as SPME adsorbent for the determination of monobutyltin, dibutyltin and tributyltin in seawater samples was studied. To achieve this aim, the potential factors affecting the SPME efficiency, including extraction time, extraction temperature, desorption time, desorption temperature, and salinity were optimized. The developed method showed good performance according to the ICH (International Conference on Harmonization of Technical Requirements for Analytical Methods) criteria. The acquired calibration curves were linear (r ≥ 0.992) over the concentration range from ≤12 to 2000 ng L⁻¹. For all of the analytes, the limit of detection at signal-to-noise ratio of 3 was below 5 ng L⁻¹. Furthermore, in comparison with the commercial carboxen/polydimethylsiloxane fiber, the developed SWCNT fiber showed better thermal stability (over 350 °C) and longer life span (over 150 times). The application of the proposed method in environmental analyses was shown by analyzing seawater samples from the harbors on the Persian Gulf for butyltin residues. Some of the butyltins were detected in the analyzed samples. Results of the present study demonstrate the feasibility of the SWCNTs as SPME adsorbent for the determination of butyltins in seawater samples.     

Facile One‐Pot Three‐Component Synthesis of Functionalized Pyridylfuran‐2‐amines

The reactive 1 : 1 zwitterionic intermediates generated in situ from the reaction between a series of isocyanides and diaroylacetylenes were trapped by pyridine carbaldehydes to yield highly functionalized 5‐pyridylfuran‐2‐amines in good yields (82–93%).     

Self‐Healing Polyester Urethane Supramolecular Elastomers Reinforced with Cellulose Nanocrystals for Biomedical Applications

Stretchable self‐healing urethane‐based biomaterials have always been crucial for biomedical applications; however, the strength is the main constraint of utilization of these healable materials. Here, a series of novel, healable, elastomeric, supramolecular polyester urethane nanocomposites of poly(1,8‐octanediol citrate) and hexamethylene diisocyanate reinforced with cellulose nanocrystals (CNCs) are introduced. Nanocomposites with various amounts of CNCs from 10 to 50 wt% are prepared using solvent casting technique followed by the evaluation of their microstructural features, mechanical properties, healability, and biocompatibility. The synthesized nanocomposites indicate significantly higher tensile modulus (approximately 36–500‐fold) in comparison to the supramolecular polymer alone. Upon exposure to heat, the materials can reheal, but nevertheless when the amount of CNC is greater than 10 wt%, the self‐healing ability of nanocomposites is deteriorated. These materials are capable of rebonding ruptured parts and fully restoring their mechanical properties. In vitro cytotoxicity test of the nanocomposites using human dermal fibroblasts confirms their good cytocompatibility. The optimized structure, self‐healing attributes, and noncytotoxicity make these nanocomposites highly promising for tissue engineering and other biomedical applications.     

Shape control of nanostructured TiO2 using a Schiff base ligand via sol–gel hydrothermal method

Employing a Schiff base ligand in a hydrothermal sol–gel method for preparation of TiO₂ nanostructures was studied. The as-prepared products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrum, electron dispersive X-ray spectroscopy and ultraviolet–visible spectroscopy. It is shown that in the controlled reaction conditions, a Schiff base ligand containing hard atoms is capable of driving the growth mechanism in a way that anisotropic shapes of TiO₂ nanostructures are formed. Considering the structure of the Schiff base ligand, the possible growth mechanism of TiO₂ nanostructures is proposed. The optical studied as well as calculated molecular orbital structure of ligand by density functional theory is done.     

A highly diastereoselective five-component synthesis of 1-(alkylimino)-5,5-dicyano-3a-aryloctahydro-3-oxacyclobuta[cd]pentalene-1a,2,5a,5b(2H,3aH)-tetracarboxylates

A novel one-pot, five-component synthesis of 1-(alkylimino)-5,5-dicyano-3a-aryloctahydro-3-oxacyclobuta[cd]pentalene-1a,2,5a,5b(2H,3aH)-tetracarboxylates is described. A mixture of phenacyl bromide, malononitrile, isocyanide, and two equivalents of a dialkyl acetylenedicarboxylate undergoes a novel 1:1:1:2 addition reaction at ambient temperature in absolute ethanol to produce diastereoselectively the title compounds in good yields.     

Convenient Synthesis of 2-Aminothiophene Derivatives by Acceleration of Gewald Reaction Under Ultrasonic Aqueous Conditions

Under ultrasound irradiation and in the presence of H₂O/Et₂NH, ethyl cyanoacetate or malononitrile can combine with α-methylene carbonyl compounds and elemental sulfur to efficiently yield 2-aminothiophene derivatives within a few minutes. Products are easily obtained by simple filtration because of their spontaneous precipitation in the reaction mixtures.     

Adsorptive Stripping Voltammetric Determination of Nanomolar Concentration of Cerium(III) at a Carbon Paste Electrode Modified by N′‐[(2‐Hydroxyphenyl)Methylidene]‐2‐Furohydrazide

The aim of this work was to obtain an adsorptive stripping voltammetric method for the Ce(III) determination at a carbon paste electrode, chemically modified with N'‐[(2‐hydroxyphenyl)methylidene]‐2‐furohydrazide (NHMF). The electroanalytical procedure comprised two steps: the Ce(III) chemical accumulation at ?200 mV followed by the electrochemical detection of the Ce(III)/NHMF complex, using anodic stripping voltammetry. The factors, influencing the adsorptive stripping performance, were optimized including the modifier quantity in the paste, the electrolyte concentrations, the solution pH and the accumulation potential or time. The resulting electrode demonstrated a linear response over a wide range of Ce(III) concentration (5.0–90 nmol dm^?3). The detection limit was found to be 0.8 nmol dm^?3 on the basis of a signal to noise ratio of 3. The precision for six determinations of 10 and 55 nmol dm^?3 Ce(III) was 5.6% and 2.1% (relative standard deviation), respectively. Application of the procedure to the determination of cerium in phosphate rock and wastewater samples gave good results.