Design and synthesis of labeling reagents (MS probes) for highly sensitive electrospray ionization mass spectrometry and their application to the detection of carbonyl, alcohol, carboxylic acid and primary amine samples.

Novel labeling reagents, called MS probes, which possess a positively charged quaternary amine moiety and can transform a neutral analyte into a charged compound by simply mixing with the analyte and allowing the mixture to stand from several minutes to 30 min at room temperature or while heating to 50 degrees C, were designed and synthesized for the highly sensitive detection of carbonyl, alcohol, carboxylic acid and primary amine samples by electrospray ionization mass spectrometry (ESI-MS). The positively charged products can be detected with high sensitivity in an ESI-MS system, which is the most popular liquid MS instrument. All of the labeled products showed a remarkably large increase in the molecular-ion peak abundance detection sensitivity of over 500-fold at picomolar concentration levels compared to that of unlabeled analytes in an ESI-MS system. These MS probes, used together with liquid MS detection, are widely applicable as a convenient method for the highly sensitive detection of less than picomolar levels of analytes, and therefore greatly enhance the power of ESI-MS analysis.     

Simulation of electron bunch generation by an ultrashort-pulse high-intensity laser-driven wakefield

Electron acceleration due to a wakefield excited by a ultrashort-pulse intense laser propagating through a finite-length underdense plasma layer is studied by two-dimensional particle-in-cell simulation. The electron energy distribution is analyzed for moderate to high intensity. For the electron density, where the pulse length is almost half of the plasma wavelength, dramatic changes of the density structure occur with cavity and bunch formation with an increase in the laser intensity, also leading to the appearance of a fast electron component well confined in phase space. The analytical form of the fast electron energy spectrum is also presented.     

Motion of redox molecules in solution monitored by the highly-sensitive EQCM technique

The behavior of redox molecules in solution that was not detected by electrochemical techniques was measured by a highly-sensitive electrochemical quartz crystal microbalance (EQCM) technique that has been improved in this study to obtain a high sensitivity of EQCM measurement in solution. The improved EQCM technique allowed to monitor the motion of a redox molecule, that is an access of the molecule to an electrode surface and repulsion from the surface during redox. An EQCM technique currently in use has measured adsorption of redox molecules on an electrode surface or polymerization on the surface caused by a chemical reaction following redox, which exhibits an enough large mass change response to detect with an EQCM measurement. However, access and repulsion of redox molecule, which is a slight motion of the molecule near on electrode surface, has not been detected and investigated by an EQCM technique, because the mass change response seems to be very small. In this study, the redox behavior of methyl viologen on a bare gold surface, pyridinethiol surface and methylpyridinethiol surface was investigated. Although the three electrodes give the same cyclic voltammogram of methyl viologen, the three are different in QCM response recorded at the same time as the voltammetry. Access/repulsion of methyl viologen within an electrical double layer was monitored by the highly-sensitive EQCM technique.     

Synthesis,surface accumulation,and micellar properties of amphiphilic block copolymers

Amphiphilic block copolymers, i.e., poly(methyl methacrylate)-b-poly(2-dimethylethylammoniumethyl methacrylate), were synthesized by the reaction between two prepolymers. Carboxyl-terminated poly(methyl methacrylate) and hydroxyl-terminated poly(2-dimethylaminoethyl methacrylate) were prepared by radical polymerization of the corresponding monomers in the presence of thioglycolic acid and 2-mercaptoethanol as a chain transfer agent, respectively. Two condensation methods, i.e., DCC and the acid chloride method, were used for the reactions of these prepolymers. The subsequent quarternization produced the amphiphilic block copolymers. Surface property of poly(methyl methacrylate) films containing this amphiphilic block copolymer was examined by measuring contact angles for water. The addition of only 0.5 wt% of the block copolymer was sufficient to make poly(methyl methacrylate) surfaces hydrophilic. The block copolymer formed a polymeric micelle in acetone–water mixed solvent.     

Reaction of 1-alkylthioisoquinolinium salts with active methylene compounds

2-Alkyl-1-alkylthioisoquinolinium salts were readily prepared from 2-alkyl-1(2H)-isoquinolones via 2-alkyl1(2H)-thioisoquinolones in two steps. Under mild conditions, the reaction of 2-alkyl-1-alkylthioisoquinolinium salts with active methylene compounds in the presence of sodium hydride afforded 2-alkyl-1-(substituted methylene)iso-quinolines in good yields. Pyrrolo[2,1-a]isoquinolines were synthesized by the cyclization of 2-benzyl-1-(substituted methylene)isoquinolines using acetic anhydride.     

Structure reinvestigation of gelsemoxonine,a constituent of Gelsemium elegans,reveals a novel,azetidine-containing indole alkaloid

[structure: see text] The structure of gelsemoxonine, isolated from Gelsemium elegans Benth., was revised to be a novel oxindole alkaloid having an azetidine unit. A new alkaloid, 14,15-dihydroxygelsenicine, which was presumed to be a biosynthetic precursor of gelsemoxonine, was also isolated.     

Preparation and photolysis of polyamides having coumarin dimer component

The ring-opening polyaddition reaction of anti and syn head-to-head Coumarin dimers with diamines and the photocleavage behavior of the resulting polyamides were investigated. Anti head-to-head Coumarin dimer successfully reacted with aliphatic and aromatic diamines in an aprotic polar solvent to give corresponding high molecular weight polyamides. The polyamides showed good film forming ability and exhibited solubility behavior typical of polyelectrolytes. Furthermore, these polyamides were found to undergo exclusively asymmetric photocleavage on the cyclobutane rings in the polymer main chain to give a fumaramide unit with elimination of 2,2′-dihydroxystilbene. On the other hand, syn head-to-head Coumarin dimer gave only low molecular weight polyamides. These polymerization and photocleavage behaviors were elucidated in comparison with those of model reactions.     

The first example of the stereoselective synthesis of 7 beta-carbamoyl-4,5alpha-epoxymorphinan via a novel and reactive gamma-lactone

7beta-Carbamoyl-4,5alpha-epoxymorphinans 5 were stereoselectively synthesized from the 7alpha-carboxylate intermediate 3 in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and amines under reflux conditions in mesitylene via a novel and reactive gamma-lactone 7. These were the first examples of the stereoselective syntheses of 7beta-substituted 4,5alpha-epoxymorphinans. The mechanism of the reaction process was elucidated as follows: 1) epimerization of 7alpha-carboxylate 3, 2) intramolecular lactonization of 7beta-carboxylate 6, and 3) aminolysis of the resultant gamma-lactone 7. The aminolysis of the isolated reactive gamma-lactone 7 with allylamine and the alcoholysis with MeOH in the presence of NaBH(4) proceeded at room temperature. The gamma-lactone 7 can be a useful intermediate for the preparation of 7beta-substituted 4,5alpha-epoxymorphinans that would be potent selective delta opioid receptor ligands. The stereoselective syntheses of the 7alpha-carbamoyl-4,5alpha-epoxymorphinans 9 from 7alpha-carboxylate 3 via 7alpha-carboxylic acid were also successful.     

Control of calcium carbonate polymorphism and morphology through biomimetic mineralization by means of nanotechnology

In vitro biomimetic mineralization by means of nanotechnology allows the formation of calcium carbonate polymorphs at low temperatures (<25 degrees C) under a CO(2) atmosphere of 500-1500 ppm. A two-dimensional zinc-ion ordered array (zinc array), which acts as an active-site mimic of carbonic anhydrase, has been prepared by immersing the self-organized monolayer of 3-(2-imidazolin-1-y)propyltriethosilane on mica (ImSi substrate) into aqueous zinc solution. The zinc array mounted on the ImSi substrate catalyzed the conversion from CO(2) to HCO(3) (-), and accelerated the formation of calcium carbonate. In situ X-ray diffraction data of the formed calcium carbonate on the poly(L-aspartate)-coated chitin substrate (pAsp substrate), with calcium ion-recognition sites, demonstrated that the interaction between the zinc array and pAsp substrates formed both vaterite and calcite at low temperature (15 degrees C) and mainly vaterite at 25 degrees C; this interaction also controlled the morphology of calcium carbonate formed on pAsp substrate.     

Crystal structure of cobalt molybdate hydrate CoMoO4·nH2O

We have determined the crystal structure of the title compound, which has a triclinic cell with cell parameters of , , , α=76.617°, β=84.188°, γ=74.510° and space group . The crystal structure suggests the chemical formula CoMoO₄·3/4H₂O. The structure consists of MoO₄ tetrahedra and CoO₆ octahedra, confirming the earlier X-ray absorption near-edge spectroscopic (XANES) investigation on the hydrate. The comparison of the crystal structures of the hydrate and the α-,β-, and hp-phases shows that the hydrate exhibits metal cation coordinations similar to those of the β-phase, but had arrangements of CoO₆ and MoO_n polyhedra similar to those of the hp-phase.