Peroxotungstate immobilized on ionic liquid-modified silica as a heterogeneous epoxidation catalyst with hydrogen peroxide

Peroxotungstate immobilized on ionic liquid-modified SiO2 is capable of heterogeneously epoxidizing a wide range of olefins with the maintenance of the catalytic activity of homogeneous analogue. The epoxidation was immediately stopped by the removal of the catalyst, and no tungsten species could be found in the filtrate after the removal of the catalyst. These results can rule out any contribution to the observed catalysis from the tungsten species that leached into the reaction solution, and the observed catalysis is truly heterogeneous in nature. Furthermore, the catalyst was reusable without the loss of the catalytic performance.     

Reactivity and catalytic activity of cationic lonomers for the nucleophilic substitution reactions

Polystyrene-based crosslinked cationic ionomers containing ammonium or phosphonium chlorides (AxRCI and PxBuCI) were reacted with decyl methanesulfonate. The kinetic data were correlated with the swelling behavior of the ionomers and the solution viscosity of the corresponding linear ionomers. The reactivity of the ionomers was independent of the particle size of the ionomer beads, indicating no diffusion control of the reaction. The solvent and the ion content of the ionomers greatly affect the reactivity. In nonpolar solvents with a low acceptor number, A_N, such as toluene, the aggregation of ionic groups with an increasing ion content reduces the reactivity. A solvent with a high value of A_N, such as chloroform, led a very low reactivity independent of the ion content. Aprotic polar solvent, such as acetonitrila, promoted the dissociation of the ionic groups and furnished a relatively high reactivity independent of the ion content. Several catalytic substitution reactions were carried out under liquid-solid-solid triphase conditions. The kinetic results were accounted for in terms of slow nucleophile transport and fast chemical reaction within the ionomer particles. © 1994 John Wiley & Sons, Inc.     

DNA topology on an increase in positive writhing number of DNA: conformation changes in the time course of cis-diamminedichloroplatinum(II)-DNA adducts

We show that the topological significance of the gel mobility of cis-diamminedichloroplatinum(II) (DDP)-closed circular DNA (ccDNA) adducts decreases with reaction time, until a point at which it joins relaxed DNA, and that the mobility of the adducts increases again. There is no relationship between the relative length of the adducts and the gel mobility. Although the significance of the decrease of gel mobility is due to the unwinding of cis-DDP-DNA (or trans-DDP-DNA) adducts, the conformational significance of the subsequent increase in mobility is unclear. To elucidate the conformational significance for unwinding of the adducts, we measured the writhing number (Wk) of the adducts using electron microscopy and analyzed the topological states of cis-DDP (or trans-DDP) adducts based on the White rule, Lk=Wk+Tk. Where, Lk and Tk represent the linking and twisting number in the ring, respectively. From the data, we found that the Wk of cis-DDP-ccDNA adducts in comparison with trans-DDP-ccDNA adducts increases from a negative to a positive number with time. This suggests that cis-DDP plays a role in the change of the topological state of ccDNA. In the abstraction of platinum from the adducts with CN- ion, the differences in both topological states may explain why Pt in trans-DDP is abstracted more easily than in cis-DDP. To explain the abstraction of Pt ion, we also discuss the findings based on the thermodynamic cycle in a intermolecular crosslink model Pt(NH3)2(guanine)2(2+)-->Pt(CN)4(2-) using the Pt parametrized PM3 method.     

Radiation-induced polymerization at high dose rate. II. α-Methylstyrene in bulk

Bulk polymerization of α-methylstyrene was carried out in a wide dose rate range, 7.6–256 rad/sec by γ rays and 8.5 × 10³–2.1 × 10⁵ rad/sec by electron beams. At high dose rate by electron beams, cationic polymerization took place along with formation of oligomeric product of DP _n = ～4. At low dose rate by γ rays, radical polymerization was found to occur in water-saturated monomer. The cationic polymerization at high dose rate proceeds with essentially the same mechanism as was already known in γ-ray polymerization of dry monomers. Relatively low reaction rate of the cationic polymerization compared with that of styrene is explained with the fact that the propagation of α-methylstyrene is much more easily inhibited by a slight amount of water.     

Solution viscosity behavior of polystyrene-based cationic ionomers. Effects of ion content and solvent

Dilute-solution viscosities of polystyrene-based cationic ionomers containing ammonio or phosphonio groups were measured in several solvents. In polar solvents with dielectric constant (ε_r) beyond 10, the ionomers showed a typical polyelectrolyte behavior, indicating that a large part of ionic groups were dissociated into ions. In nonpolar solvents with low ε_r, the reduced viscosity of the ionomers linearly decreased with a decreasing ionomer concentration. At low polymer concentrations, every ionomer gave a reduced viscosity lower than that of the corresponding chloromethylated polystyrene. With an increasing ion content, the intrinsic viscosity progressively decreased if the nonpolar solvents had a low acceptor number (A_N), such as toluene or tetrahydrofran (THF). In the halogenated solvents with high A_N value, such as chloroform, however, the intrinsic viscosity was hardly dependent on the ion content. This indicates that the intramolecular aggregation among the ionic groups is inhibited in the halogenated solvents due to a strong anion solvation. An addition of a protic solvent to a nonpolar solvent eliminates the aggregation between ionic groups and leads to polyelectrolyte behavior. © 1994 John Wiley & Sons, Inc.     

An effective method to use ionic liquids as reaction media for asymmetric reduction by Geotrichum candidum

An effective method was developed to use an enzyme in ionic liquids; the asymmetric reduction of ketones by Geotrichum candidum in ionic liquids proceeded smoothly with excellent enantioselectivity when the cell was immobilized on water-absorbing polymer containing water, while the reaction without the polymer did not proceed.     

Total synthesis of (-)-stevastelin B

The total synthesis and an unambiguous structure confirmation of stevastelin B 1, a novel 15-membered cyclic depsipeptide, are described; the fatty acid moiety in 1, prepared stereoselectively from L-quebrachitol was converted into the amino carboxylic acid, whose macrolactamization by Shioiri's procedure effectively constructed the cyclic structure of 1.     

Synthesis of di-Iron-Containing Inorganic Synzyme, γ-SiW10{Fe(OH2)}2O386?, and the Liquid-Phase Oxidation Catalysis

The Keggin-type di-iron-substituted silicotungstate, -SiW₁₀{Fe(OH₂)}₂O₃₈ ^6– (I), was synthesized by the reaction of the lacunary [-SiW₁₀O₃₆]^8– with Fe(NO₃)₃ in an acidic aqueous solution and isolated as the tetra-n-butylammonium salt (TBA-I). It was characterized by various analyses and the structure with the oxo-bridged di-iron site was clarified. TBA-I was stable and catalyzed selective oxidation of various alkanes and alkenes with hydrogen peroxide: cyclohexane, adamantane, n-hexane, and n-pentane were catalytically oxidized. Even lower alkanes such as methane, ethane, propane, and n-butane were catalytically oxidized. It was remarkable that the efficiency of hydrogen peroxide utilization to oxygenated products reached up to ca. 100% for the oxidation of cyclohexane and adamantane. Alkenes were mainly epoxidized with hydrogen peroxide. It was demonstrated that the TBA-I showed high turnover number of 135–147 for the oxidation of cyclohexane with 1 atm oxygen.