A perturbation-based heuristic for the capacitated multisource Weber problem

This paper proposes a perturbation-based heuristic for the capacitated multisource Weber problem. This procedure is based on an effective use of borderline customers. Several implementations are considered and the two most appropriate are then computationally enhanced by using a reduced neighbourhood when solving the transportation problem. Computational results are presented using data sets from the literature, originally used for the uncapacitated case, with encouraging results.     

Radiation-induced degradation and crosslinking of poly(ethylene oxide) in solid state

The effects of g-irradiation on solid poly(ethylene oxide) (PEO) of an initial weight-average molecular weight of 6.3^.10⁵ Da were investigated by gel permeation chromatography and viscometry. The parameters studied were changes in number- and weight-average molecular weight, molecular weight distribution and viscosity of PEO in aqueous solution. Irradiation of poly(ethylene oxide) powder in the presence of oxygen leads to the dominance of chain scission reactions. Their high radiation-chemical yield [G(scission) » 2.5^.10^-6 mol/J] indicates the occurrence of effective chain reactions. Upon irradiation in vacuum, crosslinking and scission occur side-by-side and the changes in molecular weight are less pronounced in the studied dose range (up to 20 kGy). Scission dominates for doses up to ca. 15 kGy, while for higher doses intermolecular crosslinking gains in importance. The competition between these processes seems to depend not only on the applied dose but also to be influenced by the inhomogenity of the material (molecular weight and/or possibly the crystallinity). Parallel occurrence of scission and crosslinking leads to the broadening of the molecular weight distribution.     

Validated HPLC method for simultaneous quantification of mutant IDH1/2 inhibitors (enasidenib,ivosidenib and vorasidenib) in mouse plasma: Application to a pharmacokinetic study

Isocitrate dehydrogenase (IDH) inhibitors comprise a novel class of anticancer drugs, which are approved to treat acute myeloid leukemia patients having mutations on IDH1/2. We report the development and validation of a high‐performance liquid chromatography (HPLC) method for the simultaneous quantitation of IDH inhibitors, namely enasidenib (EDB), ivosidenib (IDB) and vorasidenib (VDB), in mouse plasma as per the US Food and Drug Administration regulatory guidelines. The method involves extraction of EDB, IDB and VDB along with internal standard (IS; phenacetin) from mouse plasma (100 μl) using a simple protein precipitation process. The chromatographic analysis was performed on an HPLC system using a gradient mobile phase (comprising 10 mm ammonium acetate and acetonitrile in a flow‐gradient) and an X‐Terra Phenyl column. The UV detection wave length was set at λ_max 265 nm. EDB, IDB, VDB and the IS eluted at 7.36, 8.60, 9.50 and 5.12 min, respectively, with a total run time of 10 min. The calibration curve was linear over a concentration range of 0.20–12.5 μg/ml for EDB and 0.50–12.5 μg/ml for IDB and VDB (r² = ≥0.998 for all of the analytes). Validation results met the acceptance criteria. The validated HPLC method was successfully applied to a pharmacokinetic study in mice.     

Antiviral Activities of Algal-Based Sulfated Polysaccharides

An antiviral agent is urgently needed based on the high probability of the emergence and re-emergence of future viral disease, highlighted by the recent global COVID-19 pandemic. The emergence may be seen in the discovery of the Alpha, Beta, Gamma, Delta, and recently discovered Omicron variants of SARS-CoV-2. The need for strategies besides testing and isolation, social distancing, and vaccine development is clear. One of the strategies includes searching for an antiviral agent that provides effective results without toxicity, which is well-presented by significant results for carrageenan nasal spray in providing efficacy against human coronavirus-infected patients. As the primary producer of sulfated polysaccharides, marine plants, including macro- and microalgae, offer versatility in culture, production, and post-isolation development in obtaining the needed antiviral agent. Therefore, this review will describe an attempt to highlight the search for practical and safe antiviral agents from algal-based sulfated polysaccharides and to unveil their features for future development.     

Orbit Classification of Qutrit via the Gram Matrix

We classify the orbits generated by unitary transformation on the density matrices of the three-state quantum systems （qutrits） via the Gram matrix. The Gram matrix is a real symmetric matrix formed from the Hilbert- Schmidt scalar products of the vectors lying in the tangent space to the orbits. The rank of the Gram matrix determines the dimensions of the orbits, which fall into three classes for qutrits.     

Validated LC–MS/MS method for quantitation of a selective JAK1 inhibitor,filgotinib in rat plasma,and its application to a pharmacokinetic study in rats

Filgotinib is a selective JAK1 (Janus kinase) inhibitor, filed in Japan for the treatment of rheumatoid arthritis. In this paper, we report a validated liquid chromatography coupled with tandem mass spectrometry for the quantification of filgotinib in rat plasma using tofacitinib as an internal standard (IS) as per the Food and Drug Administration regulatory guidelines. Filgotinib and the IS were extracted from rat plasma using ethyl acetate as an extraction solvent and chromatographed using an isocratic mobile phase (0.2% formic acid:acetonitrile; 20:80, v/v) at a flow rate of 0.9 mL/min on a Gemini C₁₈ column. Filgotinib and the IS were eluted at ~1.31 and 0.89 min, respectively. The MS/MS ion transitions monitored were m/z 426.3 → 291.3 and m/z 313.2 → 149.2 for filgotinib and the IS, respectively. The calibration range was 0.78–1924 ng/mL. No matrix effect and carryover were observed. Intra- and inter-day accuracies and precisions were within the acceptance range. Filgotinib was stable for three freeze–thaw cycles: on bench-top up to 6 h, in an autosampler up to 21 h, and at −80 ° C for 1 month. This novel method has been applied to a pharmacokinetic study in rats.     

Validation of an LC–MS/MS Method for Simultaneous Detection of Five Selective KCNQ Channel Openers: ICA-27243, ML-213, PF-05020182, SF-0034 and Flupirtine in Mice Plasma and its Application to a Pharmacokinetic Study in Mice

A sensitive and rapid LC–MS/MS method was developed and validated for the simultaneous quantitation of five selective KCNQ channel openers, namely ICA-27243, ML-213, PF-05020182, SF-0034 and flupirtine in mice plasma as per regulatory guideline. The analytes and the internal standard (IS; flupirtine-d ₄ ) were extracted from 50 µL mice plasma by liquid–liquid extraction, followed by chromatographic separation using an Atlantis C₁₈ column with an isocratic mobile phase comprising 0.2% formic acid: acetonitrile (20:80, v/v) at a flow rate of 0.6 mL min^?1 within 2.5 min. Detection and quantitation was done by multiple reaction monitoring on a triple quadrupole mass spectrometer following the transitions: m/z 268.9 → 140.8, 258.1 → 95.1, 367.2 → 269.1, 322.2 → 248.2, 305.7 → 196.4 and 309.1 → 196.1 for ICA-27243, ML-213, PF-05020182, SF-0034, flupirtine and the IS, respectively, in the positive ionization mode. The calibration curves were linear from 1.00 to 2008 ng mL^?1 for all the analytes with r² ≥ 0.99. The intra- and inter-batch accuracy and precision (% CV) across quality controls varied from 90.0 to 113 and 2.64 to 13.0; 93.8 to 114 and 3.15 to 14.9%, respectively, for all the analytes. Analytes were found to be stable under different stability conditions. The method was applied to a pharmacokinetic study in mice.     

Experimental Study on Powder Flowability Using Vibration Shear Tube Method

The flowability of powders with different mass median diameters ranging from micrometers to nanometers was measured using the vibration shear tube method. In the measurement system used in this study, the powder was discharged through a narrow gap between a vibrating tube edge and a flat bottom surface, where each particle could experience high shear forces to overcome the adhesion and friction forces. The vibration amplitude was increased during the measurement, and the mass of particles discharged was measured at constant time intervals. From the relationship between the mass flow rate and the vibration acceleration, static and dynamic properties of the powders were evaluated using the critical vibration acceleration, characteristic mass flow rate, and gradient of mass flow rate. The correlation between the static and dynamic properties was studied in detail.     

Preparation,optimization and swelling study of carboxymethyl sago starch (CMSS)–acid hydrogel

In this study, sago starch was modified in order to enhance its physicochemical properties. Carboxymethylation was used to introduce a carboxymethyl group into a starch compound. The carboxymethyl sago starch (CMSS) was used to prepare smart hydrogel by adding acetic acid into the CMSS powder as the crosslinking agent. The degree of substitution of the CMSS obtained was 0.6410. The optimization was based on the gel content and degree of swelling of the hydrogel. In this research, four parameters were studied in order to optimize the formation of CMSS–acid hydrogel. The parameters were; CMSS concentration, acetic acid concentration, reaction time and reaction temperature. From the data analyzed, 76.69% of optimum gel content was obtained with 33.77 g/g of degree of swelling. Other than that, the swelling properties of CMSS–acid hydrogel in different media such as salt solution, different pH of phosphate buffer saline solution as well as acidic and alkaline solution were also investigated. The results showed that the CMSS–acid hydrogel swelled in both alkaline and salt solution, while in acidic or low pH solution, it tended to shrink and deswell. The production of the hydrogel as a smart material offers a lot of auspicious benefits in the future especially related to swelling behaviour and properties of the hydrogel in different types of media.